• Journal of Broadcast Engineering
• /
• v.23 no.6
• /
• pp.813-823
• /
• 2018

UHD content is characterized by higher bandwidth requirements to provide seamless playback. The existing HTTP adaptive streaming scheme periodically requests video segment of lower quality than the available bandwidth in the steady state. In the steady state, the On-Off pattern is repeated due to the difference of the available bandwidth and the encoding rate of the content. And the repeated Off interval is causing the problem that can not efficiently use the available bandwidth. In the wireless environment where the delay and loss rate are higher with large bandwidth fluctuations, this problem is exacerbated because the available bandwidth is estimated inaccurately. Therefore, in this paper, we propose a segment scheduling scheme for efficient bandwidth utilization of UHD contents streaming in wireless environment. Proposed scheme is a group segment that simultaneously reqeusts multiple segments in one request message in order to reduce frequency of OFF interval. Through simulation, Our scheme improves bandwidth utilization.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.484-491
• /
• 2022

A paradigm shift in teaching modular construction in higher education and K-12 is proposed as a means to increase the future adoption of the modular construction technique. To this effect, a new education module is presented to STEM educators. This education module is based on LEGOs and directed towards educators in the architecture, engineering, and construction (AEC) industry. The main objectives of the education module are to increase interest and knowledge of modular construction, acknowledge the benefits of using 3D design with 4D scheduling, and create a simulating hands-on educational opportunity. The education module is designed to allow participants to experience a hands-on simulation of modular construction and stick-built construction through building a LEGO project. Participants are challenged to find the advantages and disadvantages in both construction systems first-hand and record their findings. Results are presented from the preliminary testing of this education model on a group of construction management students at the University of Nevada, Las Vegas. Overall, the survey results showed that the LEGO education module was successful at achieving the project's three main objectives: 1) increasing the participants' interest and knowledge of modular construction through an interactive project; 2) increasing the participants' understanding of the benefits of 3D design with 4D scheduling over the use of 2D drawings; and 3) creating a simulating hands-on educational opportunity to help participants compare modular construction to stick-built construction. In the end, this proposed a new LEGO education module addressing the problems identified from this study with more participants.

• Journal of Nutrition and Health
• /
• v.34 no.2
• /
• pp.158-164
• /
• 2001

The present study was conducted to investigate physical characteristics, food habits of pregnant women with gestational diabetes mellites(GDM). The subjects were consecutive pregnant women, 21 GDM and 43 non-GDM controls who received antenatal care at the Obstetrics and Gynecology clinic. There were no significant difference in the mean age between the two groups(GDM:30.8years, non-GDM:30.5years). Significant differences were observed in several anthropometric characteristics such as height(GDM:159.7cm, non-GDM:162.3cm), prepregnancy weight(GDM:61.6kg, non-GDM:54.1kg), body mass index(GDM:23.9kg/$m^2$, non-GDM:20.5kg/$m^2$), and triceps skin fold thicknesses(GDM:30.9mm, non-GDM:24.7mm) between the two groups. The GDM group had an high incidence of(52.4%) family history of diabetes mellitus than those of control group(23.3%). In the GDM group, more irregularities of meals and more bed-time snacking were observed than those of control group. The intake amount of carbohydrates as well as the total energy were significantly higher in the GDM group when thery were compared with the control. These results suggest that the GDM women in Korea do exhibit clearly distinctive anthropometric and dietary characteristics. Nutritional management such as weight control before conception and throughout pregnancy, monitoring total energy and carbohydrate intakes, and implementing more rigorous meal scheduling might be beneficial for the prevention or reduction of the prevalence of the GDM or its complications. (Korean J nutrition 34(2):158~164, 2001)

• Korean Journal of Clinical Pharmacy
• /
• v.17 no.1
• /
• pp.1-5
• /
• 2007

A computerized chemotherapy order system (CCOS) was developed to improve the accuracy and efficiency of prescriptions for pharmacy medication scheduling at a teaching hospital, Asan Medical Center, Seoul, Korea. We evaluated the system by comparing prescriptions before and after the implementation of the system and by analyzing the effects of the system on dosing accuracy (only against 5-FU), prescription change, overdoses above maximum limit and medication disposal in non computerized program group (control group) and CCOS group. In terms of dosing accuracy, prescription error rate (%) was significantly decreased in CCOS groups compared with the control group. The rate of prescription changes was also significantly decreased in CCOS groups. Regarding overdoses above maximum limit, we found that there was no prescription order exceeding the dosage limit in CCOS groups in contrast to significant overdoses in control group. In terms of medication disposal, there was no significant difference between 2 groups. We suggest that the computerized chemotherapy order system for chemotherapy may bean important and useful tool for minimizing prescribing errors in the hospitals.

• ETRI Journal
• /
• v.36 no.3
• /
• pp.385-395
• /
• 2014

In this paper, we consider a resource allocation scheme for millimeter wave-based wireless personal area networks using directional antennas. This scheme involves scheduling the reservation period of medium access control for IEEE 802.15.3c. Objective functions are considered to minimize the average delay and maximize throughput; and two scheduling algorithms-namely, MInMax concurrent transmission and MAxMin concurrent transmission-are proposed to provide a suboptimal solution to each objective function. These are based on an exclusive region and two decision rules that determine the length of reservation times and the transmission order of groups. Each group consists of flows that are concurrently transmittable via spatial reuse. The algorithms appropriately apply two decision rules according to their objectives. A real video trace is used for the numerical results, which show that the proposed algorithms satisfy their objectives. They outperform other schemes on a range of measures, showing the effect of using a directional antenna. The proposed scheme efficiently supports variable bit rate traffic during the reservation period, reducing resource waste.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.11
• /
• pp.2793-2803
• /
• 2013

In H.264, three different data partition types are used, which have unequal importance to the reconstructed video quality. To improve the performance of H.264 video streaming transmission over IEEE 802.11e Wireless Local Area Networks, a prioritization mechanism that categorizes different partition types to different priority classes according to the calculated distortion within one Group of Pictures. In the proposed scheme, video streams have been encoded based on the H.264 codec with its data partition enabled. The dynamic scheduling scheme based on Enhanced Distributed Channel Access has been configured to differentiate the data partitions according to their distortion impact and the queue utilization ratio. Simulation results show that the proposed scheme improves the received video quality by 1dB in PSNR compared with the existing Enhanced Distributed Channel Access static mapping scheme.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.23 no.2
• /
• pp.187-200
• /
• 1998

This paper presents an original approach for solving short-term power scheduling in extended power system with two fuels in a unit and a limited fuel using Lagrangian relaxations. The underlying model incorporates the full set of costs and constraints including setup, production, ramping, and operational status, and takes the form of a mixed integer nonlinear control problem. Moreover, the mathematical model developed includes two fuels in a unit and a limited fuel, regulation reserve requirements of prespecified group of units. Lagrangian relaxation is used to disaggregate the model by generator into separate subproblems which are then solved with a nested dynamic program including empirical knowledges. The strength of the methodology lies partially in its ability to construct good feasible solutions from information provided by the dual. Thus, the need for branch-and-bound is eliminated. In addition, the inclusion of two fuels in a unit and a limited fuel provides new insight into the limitations of current techniques. Computational experience with the proposed algorithm indicates that Problems containing up to 23 units including 8 unit used two fuels and 24 time periods can be readily solved in reasonable times. Duality gaps of less than 4％ were achieved.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.2
• /
• pp.167-178
• /
• 2000

Software RAID(Redundant Arrays of Inexpensive Disks) is defined as a storage system that provides capabilities of hardware RAID, and guarantees high reliability as well as high performance. In this paper, we propose an enhanced disk scheduling algorithm and a scheme to guarantee reliability of data. We also design and implement software RAID by utilizing these mechanism to develop a storage system for multimedia applications. Because the proposed algorithm improves a defect of traditional GSS algorithm that disk I/O requests arc served in a fixed order, it minimizes buffer consumption and reduces the number of deadline miss through service group exchange. Software RAID also alleviates data copy overhead during disk services by sharing kernel memory. Even though the implemented software RAID uses the parity approach to guarantee reliability of data, it adopts different data allocation scheme. Therefore, we reduce disk accesses in logical XOR operations to compute the new parity data on all write operations. In the performance evaluation experiments, we found that if we apply the proposed schemes to implement the Software RAID, it can be used as a storage system for small-sized video-on-demand servers.

• Journal of the Korea Society for Simulation
• /
• v.19 no.1
• /
• pp.1-11
• /
• 2010

K company produces semiconductor package products under the make-to-order policy to supply for domestic and foreign semiconductor manufacturing companies. Its production process is a machine-paced assembly line type, which consists of die sawing, assembly, and test. This paper suggests three plans to increase process throughput based on the process analysis of K company and evaluates them via a simulation model using a real data collected. The three plans are line balancing by adding machines to the bottleneck process, product group scheduling, and reallocation of the operators in non-bottleneck processes. The evaluation result shows the highest daily throughput increase of 17.3% with an effect of 2.8% reduction of due date violation when the three plans are applied together. Payback period for the mixed application of the three plans is obtained as 1.37 years.

• The KIPS Transactions:PartB
• /
• v.10B no.7
• /
• pp.847-852
• /
• 2003

This paper implements MOD system using multicast delivery. Conventional system provide server-based system in multicast delivery but implemented system provides on-demand client-based multicast system. The scheduler aggregates clients' request and it generate multcast group addresses and port numbers according to requested video items and service request time. Then it transmits immediately multicast address to MOD server and client who request service. And then MOD server transmits requested streams with a multicast group address and the client joins the group automatically. The scheduler assigns the same multicast group address when other clients request an identical video within the same scheduling duration. The system can reduce load of server and support many clients at the same time.