• 제목/요약/키워드: Ground Rod

검색결과 161건 처리시간 0.023초

원소 황 입자와 활성 슬러지를 이용한 독립영양방식의 퍼클로레이트 제거: 회분배양연구 (Autotrophic Perchlorate-Removal Using Elemental Sulfur Granules and Activated Sludge: Batch Test)

  • 한경림;강태호;강형창;김경헌;서득화;안영희
    • 생명과학회지
    • /
    • 제21권10호
    • /
    • pp.1473-1480
    • /
    • 2011
  • 퍼클로레이트($ClO_4^-$)는 지표수 및 토양/지하수에서 검출되는 오염물이다. 미생물은 퍼클로레이트를 무해한 최종산물로 환원시킬 수 있으므로 퍼클로레이트제거는 미생물을 이용한 방법이 가장 적절한 것으로 알려졌다. 미생물이 퍼클로레이트를 환원시키기 위해서는 전자 공여체가 필요하다. 퍼클로레이트를 환원하기 위한 기존의 기술들은 전자 공여체로서 유기물을 사용하는 종속영양방식의 퍼클로레이트환원세균을 사용한다. 그래서 종속영양 방식으로 퍼클로레이트를 연속 제거하기 위해서는 지속적으로 유기물을 공급해야 하므로 처리비용이 많이 든다. 본 연구에서는 원소 황 입자와 활성 슬러지를 이용하여 독립영양방식의 퍼클로레이트제거가능성을 조사하였다. 입자상 황은 비교적 값이 저렴하고 활성 슬러지는 하수처리장으로부터 쉽게 구할 수 있는 장점이 있다. 회분배양 실험결과 활성 슬러지 미생물은 전자 공여체로서 황 입자가 존재할 때 퍼클로레이트를 제거할 수 있다는 것이 증명되었다. 이러한 퍼클로레이트 분해는 퍼클로레이트가 분해됨에 따라 생성되는 Cl-의 몰 농도를 통해 검증할 수 있었다. 독립영양방식의 $ClO_4^-$ 제거공정에 사용된 황 입자의 표면에 간균 형태의 미생물들이 존재한다는 것을 주사전자현미경을 통해 관찰하였다. 그래서 황 입자가 생물막을 형성하기 위한 담체로도 작용할 수 있다는 것을 알 수 있었다. 황입자가 첨가된 $ClO_4^-$ 분해성 농화 배양으로부터 채취한 생물막의 미생물군집조성은 접종균으로 사용된 활성 슬러지의 그것과는 다름이 DGGE 분석결과 나타났다.

국내 브루그만시아에서 분리한 Brugmansia mosaic virus의 특성 (Characterization of Brugmansia mosaic virus Isolated from Brugmansia spp. in Korea)

  • 박충열;김봉섭;남문;이민아;백다솜;배양수;박은혜;김정선;최종윤;임승모;문제선;이수헌
    • 식물병연구
    • /
    • 제20권4호
    • /
    • pp.307-313
    • /
    • 2014
  • 2013년 5월, 경기도 수원시에서 모자이크와 기형의 병징을 보이는 천사의 나팔꽃 잎을 채집하였다. 채집한 시료는 전자현미경을 이용하여 검경한 결과 720-800 nm 길이의 사상형 입자가 관찰되었다. 전자현미경 검경 결과에 근거하여 기보고된 3종의 바이러스(Brugmansia mosaic virus, Colombian datura virus, Brugmansia suaveolens mottle virus)에 대하여 RT-PCR을 수행하였으며, BruMV에 양성반응을 보였다. 기계적 접종을 이용하여 BruMV의 병원성과 기주범위를 결정하였다. 가지과(담배, 토마토, 가지)와 비름과(땅꽈리)에서 전형적인 바이러스 병징이 나타났다. BruMV의 외피단백질을 결정하기 위하여 특이적 프라이머를 설계하였고, PCR, 클로닝, 시퀀싱을 수행하였다. 계통수 분석 결과, BruMV-SW는 BruMV SK와 가장 유사한 것으로 나타났다. 외피단백질을 이용한 뉴클레오타이드 상동성 비교에서는 BruMV 분리주와 92%와 99%의 상동성을 보였다.

평안감사(平安監司) 환영도(歡迎圖)의 복식(服飾) 고찰(考察) (A Study on Dress and its Ornament seen on the Picture of Welcoming the Governor of Pyongan Province)

  • 이주원
    • 복식
    • /
    • 제4권
    • /
    • pp.39-59
    • /
    • 1981
  • This article briefly researched the Picture of Welcoming the Governor of Pyongan Province painted by Kim Hong-do, penname Danwon(1745-1818?). The Picture was composed of three parts and its historical and pictorial back-ground were reviewed firstly. And later the dress and its ornament appearing on the Picture were studied. In the historical viewpoint of dress and its ornament, the Picture shown all sorts of dress from lower class maids and servants to higher officials-dignatories and governor, and dealt with nearly all dresses. In order to support and to make better understand the dresses of that age, some Korean literary works of the same period depicting the dress and its ornament were also selected. This article dealt with the dress and its ornament. especially that of 18th century of the Yi Dynasty, and comparatively studied for our folk painting with literary works. Also the picture enabled to make this study was an important data of our old dress and its ornament. This painting was considered as one of our cultural treasures. Several conclusions drawn out from this study as followings: 1) In male and female dress of lower class people; male dress was consist of trouser and coat, and coat, and over the coat SOCHANGYI were used. Female dress was basically consist of skirt and these were white color of their favourite. Mainly simple color was used for clothing and its dress style were CHAKSOO-HYONG (narrow sleeve style) which convenient for a work. 2) Yangban's dress was consist of trouser, coat and over the coat, usually DOPO(over-coat) were used and some case JICKRYONGPO (a sort of over-coat) or CHANGYI were also used. These were GWANGSOO-HYONG (wide sleeve style) of inconvenient for a work. 3) In head-gear, there was no difference of the higher and the lower. They usually used HEUC-KRIP (black Korean hat). The OCKJUNGJA, GONJAKMI (peacock tail), HOSOO (tiger beard), and YOUNGJA (chin strip) were used according to officials ranks as head-gear's oraments. 4) Local petty officials used ordinary dress and CHUPRI (warn-dress) were also used by them, and military officials used war-dress of tight sleeve. 5) The belting of over-coat are different in color according to official grade. The higher grade wore red-wide belt, but generally black narrow belt for ordinary officials. 6) All KISAING girl wore SAMHYEOIJANG upper coat. And their head ornament were black KARIMA for grown KISAING. SAYANG hair for DONGKI or maiden KISAING and BINYEO (an ornamental rod of women's hair) were inserted into the hair of rear down part of head. The water carring maid wore BANHYEOIJANG upper coat and no KARIMA were on head and their coat were gloomy color. Above mentioned are several conclusions, and there migh be a false or erroneous explanations of 18th century dress and its ornament, however I considered they were data for blank period of quite unknown.

  • PDF

THE EFFECTS OF SURFACE CONTAMINATION ON THE SHEAR BOND STRENGTH OF COMPOMER

  • Heo, Jeong-Moo;Lee, Su-Jong;Im, Mi-Kyung
    • 대한치과보존학회:학술대회논문집
    • /
    • 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
    • /
    • pp.577-577
    • /
    • 2001
  • The lastest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not blown dry but left moist before application of the bonding primer. Ideally, the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during preparation of a restoration. The aim of this study was to evaluate the effect of contamination by hem-ostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were cleaned from soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive paper on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows: Group 1 : Dentin surface was not etched and not contaminated by hemostatic agents. Group2 : Dentin surface was not etched but was contaminated by Astringedent (Ultradent product Inc., Utah, U.S.A.). Group3 : Dentin surface was not etched but was contaminated by Bosmin (Jeil Phann, Korea.). Group4 : Dentin surface was not etched but was contaminated by Epri-dent (Epr Industries, NJ, U.S.A.). Group5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6 : Dentin surface was etched and contaminated by Astringedent. Group7 : Dentin surface was etched and contaminated by Bosmin. Group8 : Dentin surface was etched and contaminated by Epri-dent. Group9 : Dentin surface was contaminated by Astringedent. The contaminated surface was rinsed by water and dried by compressed air. Group10 : Dentin surface was contaminated by Bosmin. The contaminated surface was rinsed by water aud dried by compresfed air. Group 11 : Dentin surface was contaminated by Epri-dent. The contaminated surface was rinsed by water and dried by compresfed air. After surface conditioning, F2000 was applicated on the conditoned dentin surface. The teeth were thermocycled in distilled water at $5^{\circ}C\;and\;55^{\circ}C$ for 1000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the lmife-edge shearing rod of the Universal testing machine(Zwick 020, Germany) running at a cross head speed of 1.0mmimin. There were no significant differences in shear bond strength between groups 1 and group 3 and 4, but group 2 showed significant decrease in shear bond strength compared with group 1. There were no significant differences in shear bond strength between group 5 and group 7 and 8, but group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

  • PDF

왕겨를 가연성 담체로 하는 훈연제의 실용성 연구 (Practical Usability of Smoke Generator Containing Rice Chaff as a Combustible carrier)

  • 임희경;최경자;박노중;김용환;조광연;유주현
    • Applied Biological Chemistry
    • /
    • 제47권3호
    • /
    • pp.321-324
    • /
    • 2004
  • 왕겨를 가연성 담체로 하는 새로운 훈연제의 실용적 가치를 평가하기 위하여 살충제와 살균제를 포함하는 7종의 봉상 훈연제를 제제하고 연소성을 측정하여 시판 중인 과립훈연제와 비교하였다. 오이를 재배 중인 연동하우스에서 fenarimol 과립훈연제를 처리하고 유효성분 분포를 조사하여 농약 처리의 균일성을 검증하였다. 또한 오이 노균병과 토마토 역병에 대한 예방 효과를 측정하여 수화제와 비교하였다. 왕겨를 가연성 담체로 하고 산화제로 염소산나트륨을 첨가한 봉상 훈연제는 여러 가지 농약에 대하여 높은 훈연율을 나타내었으며, 모두 시판되고 있는 과립훈연제보다 더 높았다. 오이를 재배하고 있는 연동하우스$(1,000\;m^2)$의 5곳에 fenarimol 과립훈연제를 처리하고 조사한 9개 지점의 지표면에서는 $26.2{\pm}7.7\;ng/cm^2$의 유효성분이 검출되었으며, 비교적 균일한 분포를 나타내었다. 또한 살균제 농약을 함유하는 봉상 훈연제는 오이 노균병과 토마토 역병에 대한 예방 효과가 시판되고 있는 수화제와 동등하고 약해 유발이 없어서 농약 제형으로 손색이 없었다.

영가철과 활성슬러지를 이용한 독립영양방식의 퍼클로레이트 제거: 회분배양연구 (Autotrophic Perchlorate-Removal Using Zero-Valent Iron and Activated Sludge: Batch Test)

  • 안영희;하명규
    • 생명과학회지
    • /
    • 제21권3호
    • /
    • pp.444-450
    • /
    • 2011
  • 퍼클로레이트($ClO_4^-$)는 지표수 및 토양/지하수에서 검출되는 오염물이다. 독립영양방식의 퍼클로레이트-환원세균(PRB)은 기체 수소(H2)를 전자공여체로 사용하여 $ClO_4^-$를 제거한다. 철이 부식되면 $H_2$를 생성할 수 있음에 착안하여 본 연구에서는 하수처리장에서 쉽게 구할 수 있는 활성슬러지를 식종하여 영가철(ZVI)을 이용한 독립 영양방식의 $ClO_4^-$ 제거 가능성을 조사하였다. 회분반응실험을 통해 활성슬러지미생물이 ZVI가 존재할 때 $ClO_4^-$를 분해할 수 있음을 알 수 있었으며, 또한 이러한 $ClO_4^-$의 생분해는 $ClO_4^-$가 분해됨에 따라 생성되는 $Cl^-$의 몰 농도를 통해 확인 할 수 있었다. 독립영양방식의 $ClO_4^-$ 제거공정에 사용된 철 입자의 표면에 간균형태의 미생물들이 존재한다는 것을 주사전자현미경을 통해 관찰하였다. 그래서 철 입자가 생물막을 형성하기 위한 담체로서도 작용할 수 있다는 것을 알 수 있었다. ZVI가 첨가된 $ClO_4^-$ 분해성 농화배양으로부터 채취한 생물막의 미생물군집조성은 접종균으로 사용된 활성슬러지의 그것과는 다름이 DGGE 분석 결과 나타났다. DGGE band 중에서 생물막의 주요밴드는 Clostridia 강과 가장 관련이 있는 것으로 나타났다.

헬리콥터 주로터 블레이드의 동적밸런싱 시험에 대한 데이터베이스 설계 및 적용 (Design and Application of Database System for Dynamic Balancing Test of Helicopter Main Rotor Blade)

  • 윤병일;백승길;송근웅;김덕관
    • 한국항공우주학회지
    • /
    • 제47권8호
    • /
    • pp.582-589
    • /
    • 2019
  • 헬리콥터 주로터 블레이드의 동적 밸런싱 시험은 헬리콥터의 비행시험 전 각 블레이드의 트랙과 피치로드 하중을 동일한 수준으로 조절하기 위해 수행되는 지상회전시험이다. 이러한 동적밸런싱 시험의 목적은 블레이드 간 특성차이로 인해 나타나는 주로터 시스템 진동을 감소시키기 위함이다. 고흥 항공센터의 훨타워 시험설비에서는 오랜 기간에 걸쳐 수리온 주로터 블레이드에 대한 동적밸런싱 시험을 수행하고 데이터를 축적해 왔다. 이에 데이터양이 점차 방대해짐에 따라 시험결과를 효율적으로 관리하기 위한 데이터베이스 프로그램의 개발의 필요성이 제기되어 왔다. 본 연구에서는 훨타워 시험설비에서 수행한 동적밸런싱 시험결과를 바탕으로 구축한 데이터베이스 시스템에 대해 기술하였다. 본 연구에서 구현된 데이터베이스 시스템은 동적밸런싱 시험 결과를 각 정보별로 논리적으로 모델링하고 각각의 데이터가 상호 관계를 이룰 수 있도록 연결하여 관계형 구조를 이루도록 설계되었다. 아울러 본 논문을 통해 기 설계된 데이터베이스 시스템이 동적밸런싱 시험 결과의 축적과 시험 결과 분석에 효과적으로 활용될 수 있음을 보였다.

VTM 정광 염배소 산물에 대한 바나듐 수침출 거동 분석 및 고농도 바나듐 용액 제조 (The Water Leaching Behavior of Vanadium from a Salt-roasted VTM Concentrate and the Preparation of High-concentration Vanadium Solution)

  • 박유진;김리나;김민석;전호석;정경우
    • 자원리싸이클링
    • /
    • 제31권2호
    • /
    • pp.56-62
    • /
    • 2022
  • 본 연구에서는 탄산나트륨(Na2CO3)을 사용하여 염배소한 함바나듐 티탄철광(VTM)으로부터 바나듐의 수침출 거동을 고찰하였다. 자력선별 된 정광과 Na2CO3를 질량비 4:1로 혼합한 후 1050 ℃, 3시간 조건에서 염배소하고 로드밀을 사용해 D50=48.79 ㎛로 분쇄하여 연구에 사용하였으며 침출 온도와 광액 농도를 수침출 영향인자로 선정하였다. 연구 결과, 온도가 25, 55, 85 ℃로 증가할수록 바나듐의 침출율은 90.4, 88.2, 83.8%로 감소하였으며 광액 농도 10, 50, 100 w/v%에 따른 바나듐 침출율은 각각 90.4, 87.0, 87.0%로 변화가 크지 않았다. 이를 바탕으로 25 ℃, 100 w/v%, 300 rpm, 1시간의 조건에서 다단 침출을 수행한 결과, 총 4단 침출 후 최종 침출액의 바나듐 농도는 16.20 g/L로 분석되었다. 따라서 다단 침출을 통해 고농도 소듐바나데이트 용액의 제조가 가능하였다.

말뚝보강기초의 하중-침하량 거동 및 침하감소효과에 대한 실험적 연구 (An Experimental Study on the Load-settlement Behavior and Settlement-reducing Effect of the Disconnected Piled Raft Foundation)

  • 이영생;홍승현
    • 한국지반공학회논문집
    • /
    • 제22권4호
    • /
    • pp.95-104
    • /
    • 2006
  • 최근 경제적이고 안전한 기초 설계를 위하여 말뚝지지 전면기초(Piled raft) 또는 말뚝보강기초(Disconnected piled raft)에 대한 설계가 관심을 모으고 있다. 본 연구는 국내에서 연구가 미진한 말뚝보강기초의 거동과 그 효과를 실내 모형 시험을 대신하는 삼축압축시험을 통하여 규명하였다. 주문진 표준사와 탄소봉을 각각 지반과 말뚝으로 사용하여 삼축압축시험기에 보강 지반을 성형한 후 구속응력 상태에서 재하 시험을 실시하였다. 말뚝 보강에 따른 거동 차이를 규명하기 위하여 말뚝 개수, 말뚝 직경 및 말뚝 길이 등의 변화를 주어 하중-침하 관계를 도시하고 그 결과를 분석하였다. 시험 결과 기초지반 면적에 대한 보강 말뚝 면적비를 보강률이라 정의할 때 말뚝 수평단면 보강률이 약 18%이고, 수직단면 보강률이 약 70%일 경우 침하량은 무보강시에 비하여 약 80%까지 감소되는 것으로 나타났다. 또한 수평단면 보강률 및 수직단면 보강률에 따른 말뚝보강기초 지반의 변형계수 변화는 각각 직선식 E(Mpa) = 8.3p(%)+121.2와 E(Mpa) = 1.8p(%)+105.5로 나타났다. 본 연구의 결과 말뚝보강기초에서 소구경, 소량의 말뚝 보강으로도 비교적 큰 기초지반 침하 억제 효과가 있는 것으로 나타났다.

마오리族 傳統 服飾과 文身 考察 (A Study on the Traditional Costumes and Tattoo of the Maori)

  • 황춘섭;정현주
    • 복식문화연구
    • /
    • 제3권2호
    • /
    • pp.241-260
    • /
    • 1995
  • The Maori's traditional clothing materials, basic forms of dress, and the pattern and technique of tatoo were examined in the present study in order to deepen the appreciation of the cultural heritage of the Maori. The research method employed was the analysis of written materials. And a fild-trip was also made for the study. The study was limitted to the traditional culture of body adornment of the Maori including the clothing which is preserved and practicing by them at the present day, and the origin and the process of the historical development of those are not included in the scope of the present study. Followings are the results of the study: (1) By far the most widely used fiber for Maori clothing is abtained from what is commonly called New Zealand Flax. The fiber of kiekie(Freycinetia baueriana) and cabbage trees(Cordyline spp.) may also be used. The strong, long-lasting fiber of toi(cordyline indivisa) is used for a prestige warrior's cloak. Flat strips of ti kauka(Cordyline australi) are also used as thatch on rain cloaks. (2) Regardless of technique used, Maori weaving is always worked horizontally from left to right. Traditionally the work was suspended between two upright turuturu or weaving sticks. As the work progressed a second pair of uprights was used to keep the work off the ground. These uprights were moved forward as required. Because the weaver sat on the ground, the working edge was kept at a height that was comfortable to reach. No weaving tools are used, the wefts(aho) being manipulated by the fingers. The two main Maori weaving techniques are whatu aho patahi(single-pair twining) and whatu aho rua(double-pair twining). (3) The Maori wore two basic garments - a waist met and a cloak. The cloth of commoners were of plain manufacture, while those of people of rank were superior, sometimes being decorated with feather or dyed tags and decorated borders. Children ran more-or-less naked until puberty, being dressed only for special events. Some working dress consisted of nothing more than belts with leaves thrust under them. Chiefs and commoners usually went barefoot, using rough sandals on journeys over rough country (4) The adornment of men and women of rank was an important matter of tribal concern as it was in chiefly persons that prestige of the group was centred, The durable items of Maori persons adornment were either worn or carried. Ornaments of various kinds were draped about the neck or suspended from pierced earlobes. Combs decorated the head. Personal decorations not only enhanced the appearance of men and women, but many had protective magical function. The most evident personal ornament was the hei-tiki made of jade or other material. Maori weapons were treasured by their owners. They served on bottle and were also personal regalia. A man of rank was not fully dressed without a weapon in hand. Also weapons were essential to effective oratory. (5) No man or woman of rank went without some tattoo adornment except in extremely rare instances when a person was too sacred to have any blood shed. The untattooed were marked as beeing commoners of no social standing. This indelible mark of rank was begun, with appropriate rite and ritual, at puberty. And tattoo marked the person as being of a marriageable age. Maori tattoo was unlike most traditional tattoo in that its main line were 'engraved' on the face with deep cuts made by miniature bone chisels. The fill-in areas were not tattooed with cuts but with the multiple pricks of small bone 'combs' that only lightly penetrated the skin surface. The instrument of tattoo consisted of small pots of pumice or wood into which was placed a wetted black pigment made from burnt kauri gum, burnt vegetable caterpillars or other sooty materials. A bird bone chisel or comb set at right angles on a short wooden handle was dipped into the gigment, that a rod or stick was used to tap head of this miniature adze, causing penetration of the skin surface. Black pigment lodged under the skin took on a bluish tinge. A full made facial tattoo consisted of major spirals with smaller spirals on each side of the nose and sweeping curved lines radiating out from between the brows over the forehead and from the nose to the chin. The major patterns were cut deep, while the secondary koru patterns were lightly pricked into the skin.

  • PDF