• Spatial Information Research
• /
• 제23권4호
• /
• pp.1-11
• /
• 2015

2012년 1월부터 공간정보 오픈플랫폼의 서비스가 시작된 이래로, 서비스가 늘어남에 따라 서비스 이용자 수와 시스템의 규모가 크게 증가하게 되었다. 그러나 이러한 오픈플랫폼 시스템이 가지고 있는 하드웨어 자원들이 어느 수준의 서비스를 처리할 수 있는지에 대한 자세한 분석 결과는 전혀 알 수 없었다. 이러한 이유로 특정 이슈와 더불어 서비스 이용자가 급증할 때마다 서비스를 처리하기 위하여 단순히 하드웨어 증설을 통해 일시적으로 서비스 지연 문제를 해결하여 왔다. 이에 본 연구에서는 현재 오픈플랫폼이 보유하고 있는 시스템 성능을 정확히 파악하여 향후 동일한 문제가 발생하지 않도록 근본적인 해결책을 제시하고자 한다. 구체적으로 본 연구에서는 NMON을 이용한 하드웨어 성능 분석과 nGrinder를 이용한 웹서비스 부하 테스트를 통해 오픈플랫폼이 현재 가지고 있는 정확한 시스템 성능을 파악하고, 이후 보다 나은 서비스를 제공할 수 있는 시스템으로 개선하기 위한 자원 재조정 방안을 제시하고자 한다.

• Journal of Trauma and Injury
• /
• 제19권1호
• /
• pp.89-92
• /
• 2006

Penetrating facial wounds are uncommon and are usually life threatening because of the possibility of brain damage. There are three possible pathways for penetrating the cranium through the orbit: via the orbital roof, via the superior orbital fissure, or between the optic canal and lateral wall of the orbit. Brain injuries resulting from the penetrating wounds show extensive parenchymal damage, hemorrhage, and brain edema. Transorbital penetrating wounds can lead to diverse lesions of the optical apparatus, including the eye globe, the optical nerve, and the chiasm. Moreover, intracerebral structures may be hurt, and bleeding and infection may occur. Early diagnosis and prompt debridement are the fundamental factors affecting the outcome of a penetrating facial wound. An 87-year-old man was admitted to the emergency department with a grinder impacted into the medial aspect of the right eye. On presentation, the man was fully conscious with a Glasgow Coma Scale score of 15 and complained of a visual disturbance of the right eye. Computed tomography demonstrated a right orbital medial and inferior wall fracture, a frontal bone fracture, and a contusional hemorrhage in frontal lobe of the brain. A craniotomy with hematoma removal and repair of the orbital floor was done. He showed no neurological deficits except right visual loss. This appears to be the first report of a man with a penetrating facial wound caused by a grinder, who presented with a potentially disastrous craniocerebral injury that did not lead to any serious neurological seguelae.

• 펄프종이기술
• /
• 제47권2호
• /
• pp.61-69
• /
• 2015

A number of researches have been carried out regarding the utilization of nanocellulose(crystalline nanocellulose, microfibrillated cellulose, nanofibrillated cellulose) for the manufacture of various kinds of composites and functional products. However, only few research works on the manufacturing characteristics of nanocellulose could be found, although some companies started already the production of nanocellulose in commercial scale. However, the most important thing in commercializing of production and utilization of nanocellulose is to develop the economical and efficient process. Thus, this study was carried out in order to investigate the effects of refining, alkaline pre-treatment and grinder clearance on the characteristics of microfibrillated cellulose and energy consumption. There was no significant differences in crystalline index with the degree of microfibrillation. The initial fibrillation could be improved by refining pre-treatment, but its effect was not observed anymore since the fibrillation was done up to certain level by grinding. Refining pre-treatment did not improved the energy efficiency. Alkaline pre-treatment can be helpful because the swelling of pulp fiber will facilitate fibrillation. It was found that the decrease in grinder clearance was helpful to improve the energy efficiency.

• 한국산학기술학회논문지
• /
• 제18권4호
• /
• pp.50-57
• /
• 2017

본 사출 금형을 통해 제품 생산 시 사출 금형 내에서 제품 형상을 형성하는 코어는 금형 내부에 틀의 형태로 가공되어 설치되며 이때 부분적인 코어의 형상을 핀에 가공하여 설치하는 부품을 코어 핀이라 한다. 이러한 사출 코어 용 코어 핀은 제품의 소형화 집적화에 따라 그 크기가 마이크로의 크기로 작아지고 있다. 하지만 이를 가공 시 기존의 센터리스 연삭 장치로는 마이크로 사이즈의 피삭재를 고정하여 밀착 시켜주는 장치의 부재로 인해 진동이 발생한다. 이러한 이유로 마이크로 크기의 직경을 가지는 코어 핀의 경우 가공 시 진동에 의해 변형 발생으로 가공 불량률이 매우 높다. 따라서 본 논문에서는 마이크로 크기의 코어 핀을 가공하기 위해 기존의 평면 연삭기에 설치하여 사용이 가능한 소형의 연삭 시스템을 개발 하였다. 이를 이용하여 코어 핀에 대한 연삭 실험을 진행하였으며 표면 거칠기, 진원도, 원통도의 측정을 통해 성능을 검증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.183-184
• /
• 2013

• 대한인간공학회지
• /
• 제26권1호
• /
• pp.29-37
• /
• 2007

This study was performed to evaluate the characteristics of transmitted vibration to hand-arm system under different work posture while operating a light-weighted powered hand grinder. For the experiment, 8 different types of wrist posture (natural, unlar-flexion, radual-flexion, flexion, extension, complex posture, and etc.) and 3 types of feed force (20[N], 50[N], 70[N]) were considered. 10 male subjects were employed to polish metal plate with a hand grinder. All of them were normal and healthy with no history and symptom of the work related musculoskeletal disorders in the dominant hand. Vibration acceleration data were recorded with sampling rate, 2048[Hz]. In addition, unweighted overall R.M.S. acceleration at the tool and wrist, and transmissibility between them were used to evaluate factors from the recorded tri-axial vibration acceleration. The results indicate that transmissibility of natural wrist posture was significantly higher than others. In addition, as the feed force becomes larger, the vibration was transmitted in large quantities to hand-arm system through radius.

• 한국기계가공학회지
• /
• 제14권2호
• /
• pp.19-24
• /
• 2015

Gears are produced through a variety of methods. In general, a metal piece is formed into the general shape of a gear through rough cuts. The gear then moves on to a more precise machine that removes more material. Grinders work via abrasion, rubbing a rough surface against a work piece at such high speeds that it literally scrapes unwanted material away from the item. Since the grinder is spinning so fast, the material is removed very quickly. This allows a grinder to remove a very small amount without taking any unwanted material with it. This study investigates the effect of grinding process parameters like grinding spindle speed and table transfer speed on the gear grade and grinding efficiency.

• 펄프종이기술
• /
• 제45권1호
• /
• pp.35-41
• /
• 2013

In this study, we investigated the effect of the number of passes through agrinder on the pore characteristics of nanofibrillated cellulose (NFC) mat. The beaten pulp suspension was used to make NFC suspension using a grinder. To evaluate the pore characteristics of a NFC mat, the surface morphology of the dried NFC mat was observed with FE-SEM and the specific surface area was analyzed with BET nitrogen gas adsorption. The structure of NFC mat was changed with the different number of passes and drying methods. The specific surface area of NFC mat increased with the increase in the number of passes. The 20-passed NFC mat had 20 times larger specific surface area ($141m^2/g$) compared to the 0-passed NFC mat. The specific surface area was strongly correlated with the average pore size in NFC mat. The average pore diameter in NFC mat was calculated from the gas sorption isotherms using BJH model. The value was 13 - 15 nm, indicating that the NFC mat had mesoporous structure.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.56-62
• /
• 2003

The precision fabrication of glass is increasingly demanded for the latest industrial applications of spherical lenses, micro-optical components, and so on. In many cases, the surface roughness of glass is required to be minute for improving the optical characteristics. In this paper, machining characteristics of SF-5 glass and quarts glass are studied by using the ELID grinding process to get mirror surface and productivity compared with a general lapping process. A rotary type grinder with air spindle was used for the experiments. Mitutoyo surface tester and AFM were also used to measure the grinded surface of glass. As the results of experiments, they showed that the surface roughness (Ra) of SF-5 glass was under 7.8 nm and that of quartz glass was under 3.0 m using the # 8000 grinder. So, the possibility of highly efficient and accurate surface for optical components can be achieved by the ELID grinding process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.94-97
• /
• 2003

A precise fabrication technology of glass is increasingly demanded fer the latest Industrial applications of spherical lenses. micro-optical components, laser applications and so on. Most of cases, the surface roughness of glass is required to be minute for improving the optical characteristics. Then. the machining characteristics of SF-5 glass and quarts glass were studied by using the ELID grinding process to get mirror surface and productivity compared with a general lapping process. A rotary type grinder with ELID generator was used to make the mirror surface of glass and a Mitutoyo surface tester and a nano-hardness tester were also used to measure the grinded surface or glass. As the results of experiments. they showed that the surface roughness(Ra) of SF-5 glass was under 7.8 nm and that of quartz glass was under 3.0 nm using the # 8000 grinder. So, the possibility of highly efficient and accurate surface for optical components can be achieved by the ELID grinding process.