• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.153-156
• /
• 2002

We have developed a pixel structure for reflective color TFT-LCD which can display 27-color in still-image. The proposed pixel can display 3 gray scale in still image; white, black and median gray. This paper shows the concept and the driving method of the proposed pixel. Finally this paper compares power consumption and area with the Toshiba's DMOG technology.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.5
• /
• pp.55-61
• /
• 2007

In this paper, we propose a three-dimensional(3D) active shape models for medical image segmentation. In order to build a 3D shape model, we need to generate a point distribution model(PDM) and select corresponding landmarks in all the training shapes. The manual determination method, two-dimensional(2D) method, and limited 3D method of landmark correspondences are time-consuming, tedious, and error-prone. In this paper, we generate a 3D statistical shape model using the 3D model generation method of a distance transform and a tetrahedron method for landmarking. After generating the 3D model, we extend the shape model training and gray-level model training of 2D active shape models(ASMs) and we use the integrated modeling process with scale and gray-level models for the appearance profile to represent the local structure. Experimental results are comparable to those of region-based, contour-based methods, and 2D ASMs.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.8
• /
• pp.407-414
• /
• 2004

In this paper, a new gray scale expression method that divides the scan lines into multiple blocks is suggested. The proposed method can drive 16 sub-fields per 1 TV field in the panel with XGA ($1366{\times}768$) resolution. The on and off states of even subfields depend on the condition of odd subfields. The write address mode is used in the odd subfields, while the erase address mode is used in the even subfields. Because the ramp reset pulse is applied every 2 sub-fields, both the contrast ratio and the dynamic voltage margin are sufficiently obtained in comparison with previous AWD (Address While Display) methods. In realizing 16 subfields, shortening the scan time in the erase address period was important. The X bias voltage in the erase address period affected the minimum address voltage but did not the delay time of the address discharge. The delay time of the address discharge was affected by the address voltage and the time interval between the last sustain discharge and the scanning time. We also evaluated the dynamic false contour. New method shows an improved image quality in horizontal moving, but discontinuous lines were observed at the boundaries of each block in vertical moving

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1811-1814
• /
• 2002

In this paper, we propose an improved contrast control method f9r image improvement of multi-gray scale image. The proposed contrast control method can improve contrast of image by changing gradient of weight as the type of input image. In addition, the proposed method does not require field and frame memory for large amount of computed data. And, the proposed method can be easily applied to the FPD fur real-time processing because of its less hardware complexity than that of the conventional methods. Also it can flexibly control the contrast of input gray level by varying the weight values that control the contrast range. The operation and performance of the proposed controller have been verified using computer simulation.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1053-1058
• /
• 1998

Poly(vinyl butyral)s (PVB) with different butyral content were synthesized from poly(vinyl alcohol)(PVA) and n-butylaldehyde with acid catalyst. Bound butyral unit in PVB was determined by elemental analysis. Synthesized PVBs were reacted with p-azidobenzaldehyde to give photosensitive polymer with azidobenzene group(PVB-AZ). Bound photosensitive azidobenzene group in PVB-AZ was determined by UV spectrophotometry. The photosensitivity of PVB-AZ was compared with that of PVB/2,6-bis(p-azidobenzylidene)cyclohexanone(BAC) photosensitizer mixture system by gray scale method. Photosensitivity of PVB-AZ was higher than that of PVB/BAC mixture system. The photosensitivity of PVB-AZ was dependent on the developer used due to the solubility of PVB-AZ in a developer solvent.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.2
• /
• pp.27-34
• /
• 1997

Naphthoquinone-1,2-diazide-5-sulfonyl [NDS]derivatives members of Quinone diazide compound that are utilizable as photoresist for printing plate were synthesized, and photoresist were prepared by mixing these derivatives with a matrix resin(PF, CF) at various weight ratios. Photosensitive characteristics of photoresist were studied by Gray scale method, and SEM to analyze if they can be used as photosensitive material in a printing plate. Experimental results showed using IR, UV, NDS derivatives were photoconverted and developer-soluble photoresist were produced. Photoresist in the mixing ratio of 1:4 of NDS[II] and CF resin gave rise to the highest dissolution rate. In addition, photoresist obtained at this condition resulted in the most superior sensitivity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.708-713
• /
• 2004

A method of individual vehicle detection using gray scale image acquired from a high position is proposed for guidance of incoming vehicles to vacant cells in a parking lot and other similar purposes. With the proposed method, each image region corresponding to a cell is fragmented according to density(gray level), and the distribution of segment area is analyzed to decide if a vehicle is present. The proposed method was tested on an actual outdoor parking lot during 2 days with different weather conditions from sunrise through sunset.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1269-1272
• /
• 2005

We propose a simple and efficient driving algorithm to reduce Dynamic False Contour(DFC) in Plasma Display Panels(PDPs) by using both accumulation and combination of light emission periods. Although the accumulative way of light emission in sustain period is regarded as more effective than combinational way to reduce DFC, it takes much addressing time to express high gray-scale. Therefore, we combine accumulative and combinational light emission methods to reduce DFC. In the proposed method, one TV field (16.7ms) is composed of four combinational subfields for expressing small gray scales and fifteen accumulative subfields for large gray scales. In addition, we use some Graphic Signal Processing(GSP) algorithm to get more natural images by reducing DFC.

• Journal of Korea Multimedia Society
• /
• v.7 no.2
• /
• pp.164-172
• /
• 2004

Halftoning of gray-scale image is a process to produce a binary image. The error diffusion halftoning method produces high qualify binary image but that has some defects such as sharpening and directional artifacts. We propose the threshold modulation to reduce such defects. The proposed algorithm uses thresholds reflecting local characteristic of image. We calculate thresholds which minimize errors of flat region of each gray-scale level by using a linear gain between original image and error-diffused image and then represent edge by compensating thresholds in proportion to edge information. The proposed method improves on halftone quality by minimizing an error which cause sharpening and directional artifact.

• Journal of Mechanical Science and Technology
• /
• v.17 no.11
• /
• pp.1704-1713
• /
• 2003

Point contact film thickness in elastohydrodynamic lubrication (EHL) is analyzed by image processing method for the images from an optical interferometer with monochromatic incident light. Interference between the reflected lights both on half mirror Cr coating of glass disk and on super finished ball makes circular fringes depending on the contact conditions such as sliding velocity, applied load, viscosity-pressure characteristics and viscosity of lubricant under ambient pressure. In this situation the film thickness is regarded as the difference of optical paths between those reflected lights, which make dark and bright fringes with monochromatic incident light. The film thickness is computed by numbering the dark and bright fringe orders and the intensity (gray scale image) in each fringe regime is mapped to the corresponding film thickness. In this work, we developed a measuring technique for EHL film thickness by dividing the image patterns into two typical types under the condition of monochromatic incident light. During the image processing, the captured image is converted into digitally formatted data over the contact area without any loss of the image information of interferogram and it is also interpreted with consistency regardless of the observer's experimental experience. It is expected that the developed image processing method will provide a valuable basis to develop the image processing technique for color fringes, which is generally used for the measurement of relatively thin films in higher resolution.