• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2000년도 추계 학술발표대회 논문집
• /
• pp.94-95
• /
• 2000

본 연구는 일반 TV 대상으로 한 이상적인 비례에 관한 연구이다. 소비자들이 일반 TV 느끼는 이상적인 비례를 찾고, 일반 TV디자인시 본 연구결과를 이용, 실패율이 적은 디자인을 유출하는데 그 목적이 있다. 또한 실험결과로 추출된 TV의 이상적인 비례와 황금비례(Gold Section)와 어떠한 관계를 가지고 있는지를 알아보고자 한다. (중략)

• Structural Engineering and Mechanics
• /
• 제15권2호
• /
• pp.159-180
• /
• 2003

In this paper spacing and width of flexural cracks in reinforced concrete beams are determined using two-dimensional finite element analysis. At early loading stages on the beam the primary crack spacing is based on the slip length, which is the development length required to resist the steel stress increment that occurs at a cracked section on the formation of the first flexural crack. A semi-empirical formula is presented in this paper for the determination of the slip length for a given beam. At higher load levels, the crack spacing is based on critical crack spacing, which is defined as the particular crack spacing that would produce a concrete tensile stress equal to the flexural strength of concrete. The resulting crack width is calculated as the relative difference in extensions of steel reinforcement and adjacent concrete evaluated at the cracked section. Finally a comparative study is undertaken, which indicates that the spacing and width of cracks calculated by this method agree well with values measured by other investigators.

• The Journal of Advanced Prosthodontics
• /
• 제9권1호
• /
• pp.1-13
• /
• 2017

PURPOSE. The purpose of this study was to compare the fit of cast gold crowns fabricated from the conventional and the digital impression technique. MATERIALS AND METHODS. Artificial tooth in a master model and abutment teeth in ten patients were restored with cast gold crowns fabricated from the digital and the conventional impression technique. The forty silicone replicas were cut in three sections; each section was evaluated in nine points. The measurement was carried out by using a measuring microscope and I-Soultion. Data from the silicone replica were analyzed and all tests were performed with ${\alpha}$-level of 0.05. RESULTS. 1. The average gaps of cast gold crowns fabricated from the digital impression technique were larger than those of the conventional impression technique significantly. 2. In marginal and internal axial gap of cast gold crowns, no statistical differences were found between the two impression techniques. 3. The internal occlusal gaps of cast gold crowns fabricated from the digital impression technique were larger than those of the conventional impression technique significantly. CONCLUSION. Both prostheses presented clinically acceptable results with comparing the fit. The prostheses fabricated from the digital impression technique showed more gaps, in respect of occlusal surface.

• 자원환경지질
• /
• 제52권6호
• /
• pp.595-604
• /
• 2019

본 연구 목적은 비-가시성 금 정광을 마이크로웨이브-질산용출 시키고, 여과지를 이용하여 금을 단순하게 얻고자 하였다. 본 실험에서 사용된 시료의 경우 질산농도별로 마이크로웨이브-질산용출실험을 수행한 결과 Fe, Te, Ag 등은 완전용출(100%) 되었지만, Au는 용해되지 않았다. 용출용액을 3장의 여과지로 여과하여 SEM/EDS 분석한 결과 첫 번째, 두 번째 및 세 번째 여과지의 표면 및 단면 모두에서 Au가 검출되었다. 고체-잔류물이 포함된 여과지 3장을 모두 납-시금법에 사용한 결과 질산농도 모두에서 금 입자들이 회수되었다. 최대 금 입자(452.50g/t)가 얻어진 용출조건은 질산농도 6M에서 그리고 마이크로웨이브 조사시간 12분에서였다.

• 보존과학회지
• /
• 제26권1호
• /
• pp.13-24
• /
• 2010

부여 능산리사지 출토 누금세공 유물 4점을 대상으로 기초적인 재질특성과 미세조직을 분석하여 각각에 대한 제작방법을 살펴보았다. 이 결과 모두 22.7K 이상의 비교적 높은 순도를 나타냈으며 일부 유물에서는 금과 은이 일정 비율로 합금된 상태를 보였다. 표면을 장식한 금선은 0.2~0.8mm 두께를 보이고 다양한 단면형태를 나타냈다. 금입자는 2개 또는 3개가 접합되어 부착된 상태로, 0.3~0.8mm의 직경을 나타냈다. 금세선과 금입자의 표면 접합부에서는 땜의 잔재가 관찰되었으며 성분분석을 통해 금 땜의 사용 가능성을 확인하였다. 또한 진사(HgS), 먹과 같은 안료를 감장하여 표면을 장식한 모습도 보였다.

• 보존과학회지
• /
• 제27권4호
• /
• pp.403-414
• /
• 2011

본 연구는 2007년 국립중앙박물관 소장유물인 고려시대 화금청자 2점과 중국 북송시기 화금도자 3점의 금 잔존여부 및 금채의 채색기법 연구를 바탕으로 고려시대 금채장식을 재현 실험하였다. 도자기 시편 위에 4개의 교착제와 금분을 섞어 금채 후 $100^{\circ}C{\sim}1200^{\circ}C$까지 단계별 번조하여 표면의 교착상태와 발색력을 현미경과 색도를 관찰하였다. 이를 통해 각 교착제에 따른 시각적 효과와 적정온도를 파악하였고, 그 중 기름과 아교가 가장 뛰어난 교착력과 발색력을 보이는 것을 알 수 있었다. 이에 따라 완형의 현대 재현 고려 상감청자의 유약 표면에 기름과 아교를 각각 금채한 후 적정온도인 $700^{\circ}C{\sim}800^{\circ}C$에서 번조하였으며, 두 교착제가 유약 위에 교착된 상태를 파악하기 위해 금채의 단면을 SEM으로 관찰하였다. 그 결과, 교착력은 차이가 없었으나, 발색력, 밀도 등은 아교가 다소 떨어지는 차이가 있었다. 또한 기름은 실온에서 건조되지 않는 반면, 아교는 건조되는 장점으로 작업성이 좋은 편이었다. 이에 반해, 아교는 작업성 측면에서는 기름에 비해 매우 뛰어난 장점을 보였으나 발색력에서는 기름에 비해 다소 떨어지는 것을 이번 실험을 통해 알 수 있었다.

• 한국수산과학회지
• /
• 제35권4호
• /
• pp.451-453
• /
• 2002

The rotation of the flagellar motor is powered by the electrochemical gradient of specific ions across the cytoplasmic membrane. Recently, the gents of the Na'-driven motor have been cloned from marine bacterium of Vibrio sp. and some of the motor proteins have been purified and characterized. Also, motx gene encoding a channel component of the sodium type flagellar motor was identified from Vibrio Huuiaiis (KTCC 2473). The amino acid sequence of MotX protein from V, Huvialis shared 90, 85, $85\%$ identity with V, cholerae, V. alginolyticus, V parahaemolyticus, respectively. We have studied the localization of the expressed MotX protein in Escherichia coli by immune-gold labeling of ultra-thin frozen section. Our observation of the expressed protein indicated that MotX protein could be existed as attachment to inner membrane in E. coli.

• 센서학회지
• /
• 제30권3호
• /
• pp.170-174
• /
• 2021

As the rising attention to the medical and healthcare issue, Bio-MEMS (Micro electro mechanical systems) platform such as bio sensor, cell culture system, and microfluidics device has been studied extensively. Bio-MEMS platform mostly has high resolution structure made by biocompatible material such as polydimethylsiloxane (PDMS). In addition, three dimension structure has been applied to the bio-MEMS. Lithography can be used to fabricate complex structure by multiple process, however, non-rectangular cross section can be implemented by introducing optical apparatus to lithography technic. X-ray lithography can be used even for sub-micron scale. Here in, we demonstrated lines with round shape cross section using the tilted gold absorber which was deposited on the oblique structure as the X-ray mask. This structure was used as a mold for PDMS. Molded PDMS was applied to the cell culture platform. Moreover, molded PDMS was bonded to flat PDMS to utilize to the sub-micro channel. This work has potential to the large area bio-MEMS.

• ETRI Journal
• /
• 제45권4호
• /
• pp.603-614
• /
• 2023

Advancements in remote medical technologies and smart devices have led to expectations of contactless rehabilitation. Conventionally, rehabilitation requires clinicians to perform routine muscle function assessments with patients. However, assessment results are difficult to cross-reference owing to the lack of a gold standard. Thus, the application of remote smart rehabilitation systems is significantly hindered. This study analyzes the factors affecting the real-time evaluation of muscle function based on biometric sensor data so that we can provide a basis for a remote system. We acquired real clinical stroke patient data to identify the meaningful features associated with normal and abnormal musculature. We provide a system based on these emerging features that assesses muscle functionality in real time via streamed biometric signal data. A system view based on the amount of data, data processing speed, and feature proportions is provided to support the production of a rudimentary remote smart rehabilitation system.

• Korean Journal of Radiology
• /
• 제21권4호
• /
• pp.505-508
• /
• 2020

The epidemic of 2019 novel coronavirus, later named as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), is still gradually spreading worldwide. The nucleic acid test or genetic sequencing serves as the gold standard method for confirmation of infection, yet several recent studies have reported false-negative results of real-time reverse-transcriptase polymerase chain reaction (rRT-PCR). Here, we report two representative false-negative cases and discuss the supplementary role of clinical data with rRT-PCR, including laboratory examination results and computed tomography features. Coinfection with SARS-COV-2 and other viruses has been discussed as well.