• Korean small business review
• /
• v.43 no.4
• /
• pp.1-25
• /
• 2021

As knowledge management is recognized as a core value of organizations, organizations are increasing their investment in policies and technologies for knowledge management. However, since SMEs have relatively few resources to support knowledge sharing, which is the core of knowledge management, there is a possibility that continuous knowledge management will be difficult. This study suggests the negative motivation(job burnout) on the knowledge hoarding of SME employees and the conditions to be improved at the organizational level (shared goal, knowledge sharing culture, and person-organization fit). In this study, a hypothesis was presented through a study related to transaction theory to explain the stress in the relationship between the organization and the individual. This study collected samples through a questionnaire targeting workers of SMEs with knowledge management policies. In addition, the hypothesis was verified by performing structural equation modeling. As a result of the study, shared goal and knowledge sharing culture reduced knowledge hoarding through mitigating job burnout. In particular, person-organization fit moderated the relationship between shared goal, knowledge sharing culture, and job burnout. The study presents academic and practical implications in terms of suggesting factors to mitigate the knowledge hoarding of employees for continuous knowledge management of SMEs.

• Journal of The Korean Association For Science Education
• /
• v.36 no.1
• /
• pp.15-28
• /
• 2016

The purpose of this study is to investigate the changes of students' modeling ability in terms of 'meta-modeling knowledge' and 'modeling practice' through co-construction of scientific model. Co-construction of scientific model instructions about astronomy were given to 41 middle-school students. The students were given a before and after instruction modeling ability tests. The results show that students' 'meta-modeling knowledge' has changed into a more scientifically advanced thinking about models and modeling after the instruction. Students were able to be aware that 'they could express their thoughts using models', 'many models could be used to explain a single phenomena' and 'scientific models may change' through co-construction modeling process. The change in the 'modeling practice' of the students was divided into four cases (the level improving, the level lowering, the high-level maintaining, the low-level maintaining) depending on the change of pre-posttest levels. The modeling practice level of most students has improved through the instruction. These changes were influenced by co-construction process that provides opportunities to compete and compare their models to other models. Meanwhile, the modeling practice level of few students has lowered or maintained low level. Science score of these students at school was relatively high and they thought that the goal of learning is to get a higher score in exams by finding the correct answer. This means that students who were kept well under traditional instruction may feel harder to adapt to co-construction of scientific model instruction, which focuses more on the process of constructing knowledge based on evidences.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.372-378
• /
• 2015

Background subtraction is the first processing stage in video surveillance. It is a general term for a process which aims to separate foreground objects from a background. The goal is to construct and maintain a statistical representation of the scene that the camera sees. The output of background subtraction will be an input to a higher-level process. Background subtraction under dynamic environment in the video sequences is one such complex task. It is an important research topic in image analysis and computer vision domains. This work deals background modeling based on modified adaptive Gaussian mixture model (GMM) with three temporal differencing (TTD) method in dynamic environment. The results of background subtraction on several sequences in various testing environments show that the proposed method is efficient and robust for the dynamic environment and achieves good accuracy.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.269-274
• /
• 2008

It is attempted that the standardization of the construction, globalization of the engineering construction and an information oriented construction spread by setting a goal of the advanced construction industry and productivity increase of human resources within the country. Hence, it has been brought in the information oriented construction of BIM based technology for the field of construction and equipment of Korea. The current study that examines the possibility of application of 3D ; that is BIM based programs of building equipment, and make better the problems of 3D building equipment system through the Pilot Test, indicates the way of growth development about the construction of building equipment process system.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.6
• /
• pp.347-357
• /
• 2013

Cyber-Physical system(CPS) is characterized by collaborating computational elements controlling physical entities. In CPS, human desire to acquire useful information and control devices anytime and anywhere automatically has increased the necessity of a high reliable system. However, the physical world where CPS is deployed has management complexity and maintenance cost of 'CPS', so that it is impossible to make reliable systems. Thus, this paper presents an 'Autonomic Control System towards High-reliable Cyber-Physical Systems' that comprise 8-steps including 'fault analysis', 'fault event analysis', 'fault modeling', 'fault state interpretation', 'fault strategy decision', 'fault detection', 'diagnosis&reasoning' and 'maneuver execution'. Through these activities, we fascinate to design and implement 'Autonomic control system' than before. As a proof of the approach, we used a ISR(Intelligent Service Robot) for case study. The experimental results show that it achieves to detect a fault event for autonomic control of 'CPS'.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.4
• /
• pp.225-236
• /
• 2005

The primary goal of the study is to provide a newly refined data model, an information exchange foundation of modeling operation for rapid prototyping, as one among non-milling STEP-NC modules. The previous data model has been first modified and refined by reflecting specific user requirements. Second, subsidiary information such as fabrication history as well as traditional process information has been introduced into the newly refined model in order to consolidate the model functionality. In short, the main contribution of the study is to provide a foundation where a newly refined data model is utilized easily and conveniently for practical rapid prototyping fabrication within the newly constructed STEP-NC environment.

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.1
• /
• pp.1-8
• /
• 2001

We developed an on-line lathe simulator which can be used for a CAM education on the internet. Previously, VRML or static images such as JPG have been commonly used to achieve the same goal. With the 3D tool like VRML, it was possible to describe the movement of 3D object effectively. However, G-code based modeling and real-time visualization for the cutting process including parts being machined could not be accomplished. By using the simulator, we can machine a part with G-code input from a user or modeler, and parts being machined can be visualized in 2D as well as 3D. The developed system is based on EMCO lathe from Eshed and can be used through a web browser.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.10a
• /
• pp.207-212
• /
• 1997

The purpose of this study is the development of CAM system which can cut and measure any shape by machining center and coordinate measuring machine. The overall goal of the CAM system is to achieve the CNC machining, from digitizing through to final cutting. The hardware of the system comprises PC and machining center, CMM. There are three steps in the CNC machining, (1) workpiece measuring on the CMM, (2) geometric modeling by the CAD system, (3) NC commands generation by the tool path compensated for tool nose radius. It is developed a software package, with which can conduct a micro CAM system in the PC without economical burden.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.209-217
• /
• 2002

This gaper discusses a multidisciplinary design optimization of the engine mounting system to improve the ride quality of a vehicle and to remove the possibility of the resonance between the powertrain system and vehicle systems. The driveline model attempts to support engine mount development by providing sufficient detail for design modification assessment in a modeling environment. Design variables used in this study are the locations, the angles and the stiffness of an engine mount system. The goal of the optimization is both decoupling the roll mode ova powertrain and minimizing the vibration transmitted to the vehicle including the powertrain, simultaneously. By applying forced vibration analysis for vehicle systems and mode decouple analysis for the engine mount system, it is shown that improved optimization result is obtained.

• Journal of Korean Society for Quality Management
• /
• v.35 no.2
• /
• pp.84-98
• /
• 2007

Six Sigma advocates rigorous application of quality management tool. Using Six Sigma program provides a mechanism for service organization to achieve organization's goal and customer satisfaction. A model on Six sigma in service organization was developed and applied for the service organization. Questionnaire was developed, and data was collected and analyzed for this study. Conclusively, 6 sigma leadership is the important drivers to process management and customer relationship management. Process management and customer relationship management are significantly related to the job performance and customer satisfaction.