• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.528-530
• /
• 1999

This paper addresses the analysis and design of fuzzy control systems for a class of complex single input single output nonlinear systems. Firstly, the nonlinear system is represented by well-known Takagai-Sugeno (TS) fuzzy model and the global controller is constructed by compensating each linear model in the rule of TS fuzzy model. The design of conventional TS fuzzy-model-based controller usually is composed of two processes. One is to determine static state feedback gain of each local model and the other is to validate the stability of the designed fuzzy controller. In this paper, we propose an alternative of the design of TS fuzzy-model-based controller. The design scheme is based on the extension of conventional optimal control theory to the design of TS fuzzy-model-based controller. By using the proposed method the design and stability analysis of the TS fuzzy model-based controller is reduced to the problem of finding the solution of a set of algebraic Riccati equations. And we use the recently developed interior point method to find the solution of AREs, where AREs are recast as the LMI formulation. One simulation example is given to show the effectiveness and feasibility of the proposed fuzzy controller design method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.3
• /
• pp.246-255
• /
• 1997

The wave washer springs are expected to behave non-linearly between forces and displace¬ments due to contractions of the height and due to expansions in radial direction. To find out the non -linearity of wave washer springs, the three dimensional plate analysis theory using the finite element method is adopted in this paper. The wave washer springs are considered to be three dimensional plate structures rather than frame structures, because their thickness is normally much smaller than their width. The displacements of nodal points due to small increment of force are calculated by the finite element method and the calculated nodal displacements are added to X - Y Z coordinates of nodal points. The new stiffness matrix of the system using the new coordinates of nodal points is adopted to calculate the another nodal displacements, that is, the step by step method is used in this paper. The relations between the increments of forces and displacements in each step are recorded and plotted in chart. The experimental results are compared with the calculated chart and it is shown that there are good coincidences between measured values and calculated ones.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.5
• /
• pp.2022-2042
• /
• 2020

This research aims to contribute to the discipline of knowledge management (KM) in Higher Education (HE), and is conducted using the case of the study programme (SP) for Integrated Academic Studies (IAS) of Technics and Informatics (TI). A deduction-induction methodology is applied, using a Plan-Do-Check-Act (PDCA) approach to design a suitable KM concept for making improvements to the SP IAS TI on the standardisation platform. Based on the application of the International Classification of Standards (ICS), the research analyses the correlations and competences acquired during the courses within the accredited TI study programme of two-course studies. On the basis of the results of a comparative analysis of the developmental learning process and educational goals, it is shown that knowledge management in correlation with standardisation leads to the improvement of study programmes in the upcoming accreditation cycle on the standardisation platform. Frequent innovations within standardised thematic fields (daily, weekly, monthly, etc.) indicate the need for appropriate changes to the SP. The contribution to KM is through an original analysis of annual samples of more than 90,000 standardised sources in correlation with the TI study programme. Expert System (ES) modelling and the original results enable an analogous contribution to the future KM of other SPs.

• Steel and Composite Structures
• /
• v.21 no.3
• /
• pp.605-628
• /
• 2016

The energy absorption characteristics of diamond core sandwich cylindrical columns under axial crushing process depend greatly on the amount of material which participates in the plastic deformation. Both the single-objective and multi-objective optimizations are performed for columns under axial crushing load with core thickness and helix pitch of the honeycomb core as design variables. Models are optimized by multi-objective particle swarm optimization (MOPSO) algorithm to achieve maximum specific energy absorption (SEA) capacity and minimum peak crushing force (PCF). Results show that optimization improves the energy absorption characteristics with constrained and unconstrained peak crashing load. Also, it is concluded that the aluminum tube has a better energy absorption capability rather than steel tube at a certain peak crushing force. The results justify that the interaction effects between the honeycomb and column walls greatly improve the energy absorption efficiency. A ranking technique for order preference (TOPSIS) is then used to sort the non-dominated solutions by the preference of decision makers. That is, a multi-criteria decision which consists of MOPSO and TOPSIS is presented to find out a compromise solution for decision makers. Furthermore, local and global sensitivity analyses are performed to assess the effect of design variable values on the SEA and PCF functions in design domain. Based on the sensitivity analysis results, it is concluded that for both models, the helix pitch of the honeycomb core has greater effect on the sensitivity of SEA, while, the core thickness has greater effect on the sensitivity of PCF.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.7
• /
• pp.3594-3607
• /
• 2017

The traditional feature extraction methods such as principal component analysis (PCA) cannot obtain the local structure of the samples, and locally linear embedding (LLE) cannot obtain the global structure of the samples. However, a common drawback of existing PCA and LLE algorithm is that they cannot deal well with the sparse problem of the samples. Therefore, by integrating the globality of PCA and the locality of LLE with a sparse constraint, we developed an improved and unsupervised difference algorithm called Sparse Difference Embedding (SDE), for dimensionality reduction of high-dimensional data in small sample size problems. Significantly differing from the existing PCA and LLE algorithms, SDE seeks to find a set of perfect projections that can not only impact the locality of intraclass and maximize the globality of interclass, but can also simultaneously use the Lasso regression to obtain a sparse transformation matrix. This characteristic makes SDE more intuitive and more powerful than PCA and LLE. At last, the proposed algorithm was estimated through experiments using the Yale and AR face image databases and the USPS handwriting digital databases. The experimental results show that SDE outperforms PCA LLE and UDP attributed to its sparse discriminating characteristics, which also indicates that the SDE is an effective method for face recognition.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1322-1327
• /
• 2003

It is important to determine supporting locations for structural stability of a structure under non-uniform load in space interfered by other parts. In this case, There are many local optima with discontinuous design space. Therefore, The traditional optimization methods based on derivative are not suitable. Whereas, Genetic algorithm(GA) based on stochastic search technique is a very robust and general method. This paper has been presented to determine supporting locations of the vertical supports for reducing stress of the KSTAR(Korea super Superconducting Tokamak Advanced Research) IVCC(In-vessel control coil) under non-uniform electromagnetic load and space interfered by other parts using genetic algorithm. For this study, we develop a program combining finite element analysis with a genetic algorithm to perform structural analysis of IVCC. In addition, this paper presents a technique to perform optimization with FEM when design variables are trapped in an incongruent design space.

• Journal of the Korean Society for information Management
• /
• v.23 no.4 s.62
• /
• pp.215-231
• /
• 2006

Recently there are many bibliometric studies attempting to utilize Pathfinder networks(PFNets) for examining and analyzing the intellectual structure of a scholarly field. Pathfinder network scaling has many advantages over traditional multidimensional scaling, including its ability to represent local details as well as global intellectual structure. However there are some limitations in PFNets including very high time complexity. And Pathfinder network scaling cannot be combined with cluster analysis, which has been combined well with traditional multidimensional scaling method. In this paper, a new method named as Parallel Nearest Neighbor Clustering (PNNC) are proposed for complementing those weak points of PFNets. Comparing the clustering performance with traditional hierarchical agglomerative clustering methods shows that PNNC is not only a complement to PFNets but also a fast and powerful clustering method for organizing informations.

• World Technopolis Review
• /
• v.4 no.3
• /
• pp.144-156
• /
• 2015

Globalization and knowledge-based economy have increased the importance of local areas as the units of global competition. Therefore, the meaning of localities has been emphasized as the core value of economic activities. In this context, innovation cluster has been recognised and emphasized as effective policy measure for innovation. Therefore, most countries have been trying to develop innovation clusters with their expectation for a rapid growth of economy. Nevertheless, there have been minimal empirical researches on innovation cluster. Therefore, for suggesting implications that activation factors of innovation cluster are to have an effect on tenant's business activities, this study conducted a literature review for the theories of regional innovation system(RIS) and innovation cluster. As a result, the activation factors of innovation cluster were classified into institutional, physicals, and social factor. The case of Gyeonggi province's innovation cluster policy was examined for an empirical analysis. Data were analyzed using ordered logistic regression. The results were as follows:First, Institutional and Infra factors had a positive influence on firms' business activities in every empirical test, so they were the most important activation factors of innovation cluster. Second, regarding the interactive effects of financial support, the interactive effects between financial support and Infra factor had a positive influence on the firms' business activities, according to the result of the empirical test.

• Computers and Concrete
• /
• v.1 no.2
• /
• pp.211-226
• /
• 2004

A relatively simple multiple-vertical-line-element macro model has been incorporated into a standard computer code DRAIN-2D. It was used in blind predictions of seismic response of cantilever RC walls subjected to a series of consequent earthquakes on a shaking table. The model was able to predict predominantly flexural response with relative success. It was able to predict the stiffness and the strength of the pre-cracked specimen and time-history response of the highly nonlinear wall as well as to simulate the shift of the neutral axis and corresponding varying axial force in the cantilever wall. However, failing to identify the rupture of some brittle reinforcement in the third test, the model was not able to predict post-critical, near collapse behaviour during the subsequent response to two stronger earthquakes. The analysed macro model seems to be appropriate for global analyses of complex building structures with RC structural walls subjected to moderate/strong earthquakes. However, it cannot, by definition, be used in refined research analyses monitoring local behaviour in the post critical region.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.139-149
• /
• 1991

In this paper, an efficient method for the ultimate longitudinal strength analysis of the double skin hull girder is presented by using idealized structural unit method. Idealized plate element subjected to biaxial load is developed taking account of initial deflection and welding residual stress. Interaction effect between local and global buckling in the whole structure is also taken into consideration. The reserve strength factor and reliability index for the example 40K double skin product oil carrier are evacuated against the ultimate longitudinal strength. It is concluded that the prudent method seems to be useful in the sense that the computing time required is very short while giving the reasonable solution.