• International Journal of Industrial Entomology and Biomaterials
• /
• v.19 no.1
• /
• pp.171-174
• /
• 2009

The black soldier fly larvae are able to decompose various organic wastes such as livestock manures and food wastes. We tested whether the quality of the insect derived compost, i.e. larval feces, was comparable to that of a commercial fertilizer. The results show that the chemical composition and the growth rate of cabbages grown on the insect derived compost are virtually identical to those on the commercial fertilizer. Therefore the insect derived compost will be an ideal substitute to commercial fertilizers.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.126-129
• /
• 2007

The particle formation using pyrolysis has many advantages over other particle manufacturing techniques. The particles by pyrolysis have relatively uniform size and chemical composition. Also, we can easily produce high purity particles. Thus, we studied the formation of silicon particles by pyrolysis of 50% $SiH_4$ gas diluted in Ar gas. A pyrolysis furnace was used for the thermal decomposition of $SiH_4$ gas at $800^{\circ}C$ and atmospheric pressure. The aerosol flow from furnace is separated into two ways. The one is to the Scanning Mobility Particle Sizer (SMPS) for particle size distribution measurement and the other is to the particle deposition system. The produced silicon particles are deposited on the wafer in the deposition chamber. SEM measurement was used to compare the particle size distribution results from the SMPS. Depending on the experimental conditions, particles of high concentration in the $30\sim80$ nm size range were generated.

• Korean Journal of Pharmacognosy
• /
• v.38 no.3 s.150
• /
• pp.287-290
• /
• 2007

Phytochemical investigation of the MeOH extract of the dried stem barks of Fraxinus rhynchophylla Hance (Oleaceae), as guided by cytoprotective activity against tert-butyl hydroperoxide (t-BHP)-induced cell injury in mouse hippocampal HT22 cells, furnished two coumarins, esculetin (1) and fraxetin (2). Compounds 1 and 2 had the significant cytoprotective effects on t-BHP-induced cellular oxidative injury in HT22 cells. Furthermore, compounds 1 and 2 showed potent DPPH radical scavenging effect, exhibiting $IC_{50}$ values of 14.68 and 9.64 ${\mu}M$, respectively.

• Korean Journal of Organic Agriculture
• /
• v.26 no.2
• /
• pp.173-180
• /
• 2018

This study was conducted to investigate farmers' satisfaction in organic farming technologies developed by the Rural Development Administration (RDA). The survey targeted farmers who were eco-friendly or interested in eco-friendly agriculture. 70% of the target farmers were doing eco-friendly farming, and the satisfaction rate of the technology developed by the RDA was 3.85 points. The satisfaction of the farmers who participated in demonstration and demonstration of the farming field of the developed technology was 4.00 and the satisfaction level of organic farming instruction manual was 3.95. In addition, 38.4% of the surveyed areas were found to be pest control areas, and the impacts on the satisfaction of the organic cultivation related technology utilization and the satisfaction of the organic cultivation guide were analyzed. As a result, the RDA needs to develop and supply customized technology for aged small farmers.

• The Journal of Korea Robotics Society
• /
• v.15 no.2
• /
• pp.124-130
• /
• 2020

This paper designed modular agricultural robotic platform capable of a variety of agricultural tasks to address the problems caused by a decline in agricultural populations and an increase in average age. We propose a modular robotic platform that can perform many tasks required in field farming by replacing only work modules with common robotic platforms. This platform is capable of steering while driving on four wheels in an upland environment where farm work is performed, and an attitude control module is attached to each drive module to control the attitude of the platform. In addition, the width of the platform is designed to be variable in order to operate in various ridges according to the crop cultivation method. Finally, we evaluated five items: variable width, gradient, attitude control angle, step and road speed in order to carry out the farming industry while maintaining a stable posture.

• Journal of the Korean Vacuum Society
• /
• v.15 no.5
• /
• pp.493-498
• /
• 2006

Superluminescent diodes (SLD) with the emitting wavelength of $1.55{\mu}m$ was fabricated on InGaAs quantum dot structure grown by MOCVD. The output power and 3-dB bandwidth at room temperature and continuous wave operation were 3 mw and 55 nm, respectively.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.5
• /
• pp.66-72
• /
• 2016

Gearboxes are mechanical components that transmit power by adjusting input and output speed and torque. Their design requirements include small size, light weight, and long lifespan. We have investigated the effects of carrier pinhole position error on the load sharing and load distribution characteristics of a planetary gear set with four planet gears. The simulation model for a simple planetary gear set was developed and verified by comparing analytical results with a putative model. Then, we derived the load sharing and load distribution characteristics under various pinhole position error conditions using the prototypical simulation model. The results showed that the mesh load factor and face load factor increased with the pinhole position error, which then influenced the safety factor for tooth bending strength and surface durability.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.5
• /
• pp.803-807
• /
• 2008

A making process of DSC(dye sensitized solar cell) was presented. In general, Photo electrodes of DSC was made by using colloid paste of nano $TiO_2$ and processing of Doctor-blade printing and high temperature sintering for porous structure. These methods lead to cracks on $TiO_2$ surface and ununiform of $TiO_2$ thickness. This phenomenon is one factor that makes low efficiency to cells. After $TiO_2$ printing on TCO glass, a physical vibration was adapted for reducing ununiform of $TiO_2$ thickness. And a thermal treatment at low temperature(under $75^{\circ}C$) was adapted for reducing cracks on $TiO_2$ surface. In this paper, we have designed and manufactured an ultrasonic circuit (100W, frequency and duty variable) and a thermal equipment. Then, we have optimized forcing time, frequency and duty of ultrasonic irradiation and thermal heating for surface treatment of photo-electrode of DSC. In I-V characteristic test of DSC, ultrasonic and thermal treated DSC shows 19% improved its efficiency against monolithic DSC. And it shows stability of light-harvesting from drastically change of light irradiation test.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1146-1147
• /
• 2008

PV Power Conditioning System (PCS) must have high conversion and low cost. Generally, PV PCS uses either a single converter or multilevel module integrated converter (MIC). Each of these approaches has both advantage and disadvantage. For a high conversion efficiency and low cost of PV module, this paper proposes series connection of module integrated DC-DC converter's output with PV panel. Output voltage of PV panel is connected to the output capacitor of flyback converter. Thus, converter's output voltage is added to the output voltage of PV panel. Isolated DC-DC converter generates only the difference voltage between the PV panel voltage and the required total output voltage. This method reduces power level of DC-DC converter and enhances the energy conversion efficiency compared with conventional DC-DC converter.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1326-1327
• /
• 2008

Recently, the air pollution is supposed is to be the most serious environmental problem. Therefore, a small air cleaner is asked to make comfortable indoor environment for the moderns who have frequent indoor activity. In this study, without generating of the second pollution source, dust in the air and harmful microorganisms can be removed by the electric dust collecting technology which has high reliability and efficiency to be able to remove the impurities even though it is just 0.01${\mu}m$. Accordingly, power sources of the dust collector use, it is not inefficiency and offering to dust collector unstable. In order to overcome the point at issue, a this study, for power factor compensating use the PFC circuit, for removing the noise use EMI filter and for generating the hight voltage use the Cockcroft Walton Circuit. And we study power source on characteristic and improvement.