• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1751_1752
• /
• 2009

The accurate measurement of soil resistivity and earthing system resistance is fundamental to electrical safety. However, geological and meterological factors can have a considerable effect on the accuracy of conventional measurements and the validity of the measurement methods. This paper presents optimization method of dc resistivity data acquisition system using ERT.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.47-52
• /
• 2004

Interferometric synthetic aperture radar (InSAR) is a remote sensing technique capable of measuring ground surface deformation with sub-centimeter precision and spatial resolution in tens-of-meters over a large region. This paper highlights our on-going investigations of Aleutian volcanoes with SAR images acquired from European ERS-1 and ERS-2, Canadian Radarsat-l, and Japanese JERS-l satellites.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 추계 학술대회논문집
• /
• pp.158-162
• /
• 1999

This thesis presents applications of three dimensional visualization technique based on shear-warp volume rendering to medical information. Volume rendering is compared to surface rendering and acceleration technique is also presented. The presented rendering techniques by using three-dimensional arrays of data are a widely used representation for computational fluid dynamics and geological structures as well as medical information.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.27-43
• /
• 2002

This paper described two case studies on large scale failure of cutting slope. The kind of rock in both sites predominated limestone and shale respectively. These cutting slopes located in northern area of Gyongbug Province are composed of very complicated and various rock mass. Geological characteristics, causes of failure, proceeding of security diagnose, maintenance method etc. of two sites were carried out to check the cutting slope stability and to provide reasonable maintenance method. This paper may provide the useful data for engineers related with design and construction of large cutting slope.

• 대한원격탐사학회지
• /
• 제21권1호
• /
• pp.59-72
• /
• 2005

Interferometric synthetic aperture radar (InSAR) is a remote sensing technique capable of measuring ground surface deformation with sub-centimeter precision and spatial resolution in tens-of­meters over a large region. This paper describes basics of InSAR and highlights our studies of Alaskan volcanoes with InSAR images acquired from European ERS-l and ERS-2, Canadian Radarsat-l, and Japanese JERS-l satellites.

• 한국환경과학회지
• /
• 제33권6호
• /
• pp.435-442
• /
• 2024

We investigated the accuracy of surface air temperature prediction according to the selection of land-use data and initial meteorological data using the Weather Research and Forecasting model-v4.2.1. A numerical experiment was conducted at the Daegu Dyeing Industrial Complex. We initially used meteorological input data from GFS (Global forecast system)and GDAPS (Global data assimilation and prediction system). High-resolution input data were generated and used as input data for the weather model using the land cover data of the Ministry of Environment and the digital elevation model of the Ministry of Land, Infrastructure, and Transport. The experiment was conducted by classifying the terrestrial and topographic data (land cover data) and meteorological data applied to the model. For simulations using high-resolution terrestrial data(10 m), global data assimilation, and prediction system data(CASE 3), the calculated surface temperature was much closer to the automatic weather station observations than for simulations using low-resolution terrestrial data(900 m) and GFS(CASE 1).

• Asian Journal of Atmospheric Environment
• /
• 제7권2호
• /
• pp.120-128
• /
• 2013

The concentration and composition of particulate matter (PM) in the atmosphere can directly reflect the environmental pollution. The atmospheric pollution in some Cameroonian cities is increasing with the industrial development and urbanization. Air pollution is inherently complex, containing PM of varied size and composition. This PM exists as a dynamic cloud interacting with sunlight and is modified by the meteorology. The reflectometer and the EDXRF spectrometry are applied to determine the concentration of some specific elements at four sites in the city of Yaound$\acute{e}$. The particular aim of the present work is to put in place data base on air pollution in urban area and elaborate regulations on the emissions issued to industrial and vehicle activities. This study provides an overview of the concentration of black carbon and some specific elements in the air, which have impacts on human health. The measurement was done by distinguishing the size of particle. So that, the particle with aerodynamic diameter between $2.5-10{\mu}m$ (so-called coarse particle) and aerodynamic diameter < $2.5{\mu}m$ (so-called fine particle) were considered to obtain more information about levels of the inhalable fraction of the location. The results obtained in four locations of the city of Yaound$\acute{e}$ show that the black carbon concentration is very considerable, the element sulfur is a major pollutant and the concentration of fine particle is very greater. The results obtained of fine and coarse filters range from $5-17{\mu}g/m^3$ and $10-18{\mu}g/m^3$ for the black carbon. S, Cu, Zn, Pb, Cd, As, Se and Hg are the specific findings of this work. The pollutants with a greater concentration are S, Pb, and Zn. These later seem to be non-uniformly, non-regular in some location and high compared to other countries. This work allows us to make a potential relation between pollutants and emission sources. In this framework, some suggestions have been proposed to reduce emissions for an improvement of the air quality in the environment and thus, the one of the city of Yaound$\acute{e}$.

• 한국지리정보학회지
• /
• 제8권4호
• /
• pp.165-175
• /
• 2005

지리정보시스템(GIS)은 정보관리나 공간분석을 통해서 문화유적의 보존과 국토이용을 위한 목적에 유용하게 사용될 수 있다. 본 연구의 목적은 지리정보시스템을 이용하여 전국적으로 분포하는 요지유적의 위치를 입력하고, 입지특성을 분석하여, 분포지역을 예측하는데 있다. 이를 위하여 전국의 약 1,200개소 요지유적의 위치를 입력하였고, 각 위치별 입지분석(고도, 사변의 경사, 사변방향, 수계) 및 통계분석을 통해 요지의 입지특성을 해석하였다. 요지유적 분포는 1에서 5까지 등급화된 고도분포, 사변경사, 수계비고, 수계거리, 사변방향의 5개 변수에 대한 중첩분석결과에 의하여 결정되었다. 대전광역시 성북동 일대에 분포하는 요지유적을 대상으로 분포를 예측한 결과 조사지역의 산능선 하부와 충적평야에 이르는 중간지역에서 요지유적 분포 가능성이 높게 나타났으며, 야외에서 확인된 요지유적의 분포와도 일치하였다. 본 시범연구 결과 전국적으로 더 많은 요지분포 자료가 확보된다면 요지분포가 확인되지 않은 지역에 대한 분포 예측력이 보다 향상될 것으로 기대된다.

• 자원환경지질
• /
• 제13권3호
• /
• pp.141-158
• /
• 1980

A geologic structure could be formed through various processes, because there are a number of factors which control the deformation of the Earth's crust. In geology, we could call it geological epistemology to describe exactly a geologic structure, and call it geological logics to infer logically the deforming process through which the geologic structure had been formed. Degree of legitimacy of geological logics depends upon the degree of exactness of geological epistemology. This study described quantitatively 3-dimensional Hambaek Syncline through computer analysis, and examined qualitatively into its deforming mechanism based on the results of 3-dimensional analysis of the structure. Input data for the computer analysis are dips and dip directions of bedding planes of the structure. The Hambaek Syncline disclose a minor fold group of NE-SW or NNE-SSW trend and a large scale fold of E-W trend. The conclusions of this study are as follows: (1) The fold of E-W trend is primary fold $(F_1)$ and the minor fold group of NE-SW or NNE-SSW trend secondary fold $(F_2)$. (2) Hambaek Syncline is cylindrical type fold. (3) Apparent axial trace of Hambaek syncline does not coincide with true axial trace. The apparent axial trace is $N70^{\circ}-80^{\circ}W$ in Gohan and Sabuk area, and changes to $N70^{\circ}-80^{\circ}E$ in the westward of the area, while the true axial trace is $N40^{\circ}-70^{\circ}W$ in the former, and $N60^{\circ}-80^{\circ}E$ in the latter area. (4) Westward dipping of axial plane of the minor fold group of NE-SW or NNE-SSW trend can be attributed to simple shear movements along overthrusts. (5) Angle between axial trace and the directional trace of the maximum principal compressive stress $({\sigma}_1)$ may not be perpendicular each other. The angle between them is governed by the following factors; 1) the plunge of fold axis 2) the dip of axial surface 3) cylindrisity (6) The mean axial trace of Hambaek Syncline $(F_1)$ is $N45.6^{\circ}W$, and the directional trace of ${\sigma}_1$ is $N52.4^{\circ}E$ (7) The mean axial trace of the minor fold group of NE-SW or NNE-SSW trend $(F_2)$ is $N21^{\circ}E$, and the directional trace of ${\sigma}_1$ is $N22^{\circ}W$.

• 방사성폐기물학회지
• /
• 제13권1호
• /
• pp.1-10
• /
• 2015

방사성폐기물 심지층 처분시스템의 안전성평가에서는 일반적으로 정상 시나리오 이외에 심지층 처분시스템이 외부요인에 의해서 영향을 받는 비정상 시나리오를 추가적으로 고려하게 된다. 본 연구에서는 방사성폐기물 심지층 처분시스템의 비정상 시나리오를 포함하는 복합 시나리오에 대한 안전성평가를 위하여 비정상 시나리오를 구성하는 비정상 사건으로 국내 우물침입 발생 특성을 조사하였다. 이를 위하여, 국내의 우물 개발 자료에 대한 통계·확률적인 접근법으로 우물 개발 특성을 조사하고, 이를 통해 미래의 우물침입 발생 특성을 예측하는 방법론과 함께 계산 예를 소개하였다. 그 결과 국내 단위 면적 당 연간 우물 개발율은 보수성을 고려하여 최근 기록의 최대치인 0.8 공/년/km²로 설정되었다. 처분시스템 영향권 면적인 1.5 km²을 고려하면, 처분시스템 전체에 연간 우물 개발이 발생할 확률은 1.2 공/년으로 계산된다. 즉, 처분시스템의 제도적 관리기간 이후에는 매년 1 공 이상의 우물이 처분시스템 영향권 내에 설치가 될 것으로 예측된다는 것이다. 여기서, 설치된 우물은 정호 심도를 고려하지 않은 것이다. 설치된 우물의 정호 심도는 기존 자료들의 분포 특성을 분석한 결과, 평균 = 3.0363 m와 표준편차 = 1.1467 m의 로그정규분포로 예측될 수 있었다. 본 연구는 앞으로 우물침입이 처분시스템에 미치는 영향에 대한 추가 연구와 함께 향후 복합 시나리오를 고려한 심지층 처분시스템의 안전성평가 신뢰도 향상에 크게 기여할 수 있을 것으로 판단된다.