• Korean journal of applied entomology
• /
• v.31 no.4
• /
• pp.551-559
• /
• 1992

These studies were conducted to investigate the biological effects of buprofezin 25% WP on the adult of the brown planthopper (BPH) and its control effects on the BPH population, when buprofezin was treated on different days after the introduction of the BPH adult to the potted rice. Also age structures of the BPH population at the time of buprofezin treatment were observed. The results were as follows: Buprofezin (7.0 g a.i./l0 a) could reduce the longevity and fecundity of the newly emerged female but did not affect the biology of older female, and it did not affect the biology of the male. The larval densities at the time of buprofezin treatment was reduced to nearly zero after treatment. The higher the residual effect and the proportion of larvae at the time of buprofezin treatment were, the higher its con¬trol effect on the BPH population was. In case of buprofezin 7.0 g a.i./l0a treatment, the time interval of treatment that could show the highest control effect was about 10 days (from 18 days after the adult introduction to the adult emergence days of next generation).

• Journal of Mechanical Science and Technology
• /
• v.20 no.8
• /
• pp.1256-1265
• /
• 2006

The supersonic flows around tandem cavities were investigated by two-dimensional and three-dimensional numerical simulations using the Reynolds-Averaged Navier-Stokes (RANS) equation with the k- ω turbulence model. The flow around a cavity is characterized as unsteady flow because of the formation and dissipation of vortices due to the interaction between the freestream shear layer and cavity internal flow, the generation of shock and expansion waves, and the acoustic effect transmitted from wake flow to upstream. The upwind TVD scheme based on the flux vector split with van Leer's limiter was used as the numerical method. Numerical calculations were performed by the parallel processing with time discretizations carried out by the 4th-order Runge- Kutta method. The aspect ratios of cavities are 3 for the first cavity and 1 for the second cavity. The ratio of cavity interval to depth is 1. The ratio of cavity width to depth is 1 in the case of three dimensional flow. The Mach number and the Reynolds number were 1.5 and $4.5{\times}10^5$, respectively. The characteristics of the dominant frequency between two- dimensional and three-dimensional flows were compared, and the characteristics of the second cavity flow due to the first cavity flow was analyzed. Both two dimensional and three dimensional flow oscillations were in the 'shear layer mode', which is based on the feedback mechanism of Rossiter's formula. However, three dimensional flow was much less turbulent than two dimensional flow, depending on whether it could inflow and outflow laterally. The dominant frequencies of the two dimensional flow and three dimensional flows coincided with Rossiter's 2nd mode frequency. The another dominant frequency of the three dimensional flow corresponded to Rossiter's 1st mode frequency.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.1
• /
• pp.11-21
• /
• 2008

Recently, it has shown an increased interest in 3D stereoscopic contents due to the development of the digital image media. Therefore, many techniques in 3D stereoscopic image generation have being researched and developed. However, it is difficult to generate high immersion and natural 3D stereoscopic contents, because the lack of 3D geometric information imposes restrictions in 2D image. In addition, control of the camera interval and rendering of the both eyes must be repetitively accomplished for the stereo effect being high. Therefore, we propose integrated editing system for 3D stereoscopic contents production using a variety of images. Then we generate 3D model from projective geometric information in single 2D image using image-based modeling method. And we offer real-time interactive 3D stereoscopic preview function for determining high immersion 3D stereo view. And then we generate intuitively 3D stereoscopic contents of high-quality through a stereoscopic LCD monitor and a polarizing filter glasses.

• Journal of Menopausal Medicine
• /
• v.24 no.3
• /
• pp.183-187
• /
• 2018

Objectives: The present mini review aimed to summarize the existing knowledge regarding the beneficial and adverse effects of raloxifene in menopausal women. Methods: This study is a review of relevant publications about the effects of raloxifene on sleep disorder, depression, venous thromboembolism, the plasma concentration of lipoprotein, breast cancer, and cognitive function among menopausal women. Results: Raloxifene showed no significant effect on depression and sleep disorder. Verbal memory improved with administration of 60 mg/day of raloxifene while a mild cognitive impairment risk reduction by 33% was observed with administration of 120 mg/day of raloxifene. Raloxifene was associated with a 50% decrease in the need for prolapse surgery. The result of a meta-analysis showed a significant decline in the plasma concentration of lipoprotein in the raloxifene group compared to placebo (standardized mean difference, -0.43; 10 trials). A network meta-analysis showed that raloxifene significantly decreased the risk of breast cancer (relative risk, 0.572; 95% confidence interval, 0.327-0.881; P = 0.01). In terms of adverse effects of raloxifene, the odds ratio (OR) was observed to be 1.54 (P = 0.006), indicating 54% increase in the risk of deep vein thrombosis (DVT) while the OR for pulmonary embolism (PE) was 1.05, suggesting a 91% increase in the risk of PE alone (P = 0.03). Conclusions: Raloxifene had no significant effect on depression and sleep disorder but decreased the concentration of lipoprotein. Raloxifene administration was associated with an increased risk of DVT and PE and a decreased risk of breast cancer and pelvic organ prolapse in postmenopausal women.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.2
• /
• pp.183-191
• /
• 2019

Objective: The purpose of this study was to compare intended and actual yearly genetic gains for milk production and conformation traits and to investigate the simple selection criterion practiced among milk production and conformation traits during the last two decades in Japan. Learning how to utilize the information on intended and actual genetic gains during the last two decades into the genomic era is vital. Methods: Genetic superiority for each trait for four paths of selection (sires to breed bulls [SB], sires to breed cows [SC], dams to breed bulls [DB], and dams to breed cows [DC]) was estimated. Actual practiced simple selection criteria were investigated among milk production and conformation traits and relative emphasis on milk production and conformation traits was compared. Results: Selection differentials in milk production traits were greater than those of conformation traits in all four paths of selection. Realized yearly genetic gain was less than that intended for milk production traits. Actual annual genetic gain for conformation traits was equivalent to or greater than intended. Retrospective selection weights of milk production and conformation traits were 0.73:0.27 and 0.56:0.44 for intended and realized genetic gains, respectively. Conclusion: Selection was aimed more toward increasing genetic gain in milk production than toward conformation traits over the past two decades in Japan. In contrast, actual annual genetic gain for conformation traits was equivalent to or greater than intended. Balanced selection between milk production and conformation traits tended to be favored during actual selection. Each of four paths of selection (SB, SC, DB, and DC) has played an individual and important role. With shortening generation interval in the genomic era, a young sire arises before the completion of sire's daughters' milk production records. How to integrate these four paths of selection in the genomic era is vital.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.82-96
• /
• 2019

A semi-submersible structure has been widely used for offshore drilling and production of oil and gas. The small water plane area makes the structure very sensitive to weight increase in terms of payload and stability. Therefore, it is necessary to lighten the substructure from the early design stage. This study aims at an optimization of hull structure based on a sophisticated yield and buckling strength in accordance with classification rules. An in-house strength assessment system is developed to automate the procedure such as a generation of buckling panels, a collection of required panel information, automatic buckling and yield check and so on. The developed system enables an automatic yield and buckling strength check of all panels composing the hull structure at each iteration of the optimization. Design variables are plate thickness and stiffener section profiles. In order to overcome the difficulty of large number of design variables and the computational burden of FE analysis, various methods are proposed. The steepest descent method is selected as the optimization algorithm for an efficient search. For a reduction of the number of design variables and a direct application to practical design, the stiffener section variable is determined by selecting one from a pre-defined standard library. Plate thickness is also discretized at 0.5t interval. The number of FE analysis is reduced by using equations to analytically estimating the stress changes in gradient calculation and line search steps. As an endeavor to robust optimization, the number of design variables to be simultaneously optimized is divided by grouping the scantling variables by the plane. A sequential optimization is performed group by group. As a verification example, a central column of a semi-submersible structure is optimized and compared with a conventional optimization of all design variables at once.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.3
• /
• pp.197-204
• /
• 2021

In MBR, extracellular polymeric substance (EPS) is known as an important factor of fouling; soluble EPS (sEPS) affects internal contamination of membrane, and bound EPS (bEPS) affects the formation of the cake layer. The production of EPS changes according to the composition of influent, which affects fouling characteristics. Therefore, in this study, the effects of the F/M ratio on the sEPS concentration, bEPS content, and fouling were evaluated. The effects of F/M ratio on the amount and composition of EPS were confirmed by setting conditions that were very low or higher than the general F/M ratio of MBR, and the fouling occurrence characteristics were evaluated by filtration resistance distribution. As a result, it was found that the sEPS increased significantly with the increase of the F/M ratio. When the substrate was depleted, bEPS content decreased because bEPS was hydrolyzed into BAP and seemed to be used as a substrate. In contrast, when the substrate is sufficient, UAP (utilization-associated products) was rapidly generated in proportion with the consumption of the substrate. UAP has a relatively higher Protein/Carbohydrate ratio (P/C ratio) than BAP, and this means, it has a higher adhesive force to the membrane surface. As a result, UAP seems like causing fouling rather than BAP (biomass-associated products). Therefore, R_f (Resistance of internal contamination) increased rapidly with the increase of UAP, and R_c (Resistance of cake layer) increased with the accumulation of bEPS in proportion, and as a result, the fouling interval was shortened. According to this study, a high F/M ratio leads to an increment in UAP generation and accumulation of bEPS, and by these UAP and bEPS, membrane fouling is promoted.

• The Korean Journal of Pain
• /
• v.34 no.1
• /
• pp.4-18
• /
• 2021

Except for carbamazepine for trigeminal neuralgia, gabapentinoid anticonvulsants have been the standard for the treatment of neuropathic pain. Pregabalin, which followed gabapentin, was developed with the benefit of rapid peak blood concentration and better bioavailability. Mirogabalin besylate (DS-5565, Tarlige®) shows greater sustained analgesia due to a high affinity to, and slow dissociation from, the α2δ-1 subunits in the dorsal root ganglion (DRG). Additionally, it produces a lower level of central nervous system-specific adverse drug reactions (ADRs), due to a low affinity to, and rapid dissociation from, the α2δ-2 subunits in the cerebellum. Maximum plasma concentration is achieved in less than 1 hour, compared to 1 hour for pregabalin and 3 hours for gabapentin. The plasma protein binding is relatively low, at less than 25%. As with all gabapentinoids, it is also largely excreted via the kidneys in an unchanged form, and so the administration dose should also be adjusted according to renal function. The equianalgesic daily dose for 30 mg of mirogabalin is 600 mg of pregabalin and over 1,200 mg of gabapentin. The initial adult dose starts at 5 mg, given orally twice a day, and is gradually increased by 5 mg at an interval of at least a week, to 15 mg. In conclusion, mirogabalin is anticipated to be a novel, safe gabapentinoid anticonvulsant with a greater therapeutic effect for neuropathic pain in the DRG and lower ADRs in the cerebellum.

• The Korean Journal of Pain
• /
• v.35 no.1
• /
• pp.14-21
• /
• 2022

The coronavirus disease 2019 (COVID-19) pandemic, which has been rampant since the end of 2019, has evidently affected pain management in clinical practice. Fortunately, a COVID-19 vaccination program is currently in progress worldwide. There is an ongoing discussion that pain management using steroid injections can decrease COVID-19 vaccine efficacy, although currently there is no direct evidence to support this statement. As such, the feeling of pain in patients is doubled in addition to the co-existing ill-effects of social isolation associated with the pandemic. Thus, in the COVID-19 era, it has become necessary that physicians be able to provide high quality pain management without negatively impacting COVID-19 vaccine efficacy. Steroids can alter the entire process involved in the generation of adaptive immunity after vaccination. The period of hypophysis-pituitary-adrenal axis suppression is known to be 1 to 4 weeks after steroid injection, and although the exact timing for peak efficacy of COVID-19 vaccines is slightly different for each vaccine, the average is approximately 2 weeks. It is suggested to avoid steroid injections for a total of 4 weeks (1 week before and after the two vaccine doses) for the double-shot vaccines, and for 2 weeks in total (1 week before and after vaccination) for a single-shot vaccine. This review focuses on the basic concepts of the various COVID-19 vaccines, the effect of steroid injections on vaccine efficacy, and suggestions regarding an appropriate interval between the administration of steroid injections and the COVID-19 vaccine.

• Journal of Gastric Cancer
• /
• v.22 no.1
• /
• pp.47-55
• /
• 2022

Purpose: The use of direct oral Xa inhibitors (DXaIs) to prevent venothrombotic events is increasing. However, gastrointestinal bleeding, including that related to endoscopic resection, is a concern. In this study, we evaluated bleeding and coagulation times during the perioperative period of gastric endoscopic submucosal dissection (ESD). Materials and Methods: Patients who consecutively underwent gastric ESD from August 2016 to December 2018 were analyzed. Bleeding rates were compared among the 3 groups (antiplatelet, DXaIs, and control). DXaI administration was discontinued on the day of the procedure. Prothrombin time (PT), activated partial thromboplastin time, and the ratio of inhibited thrombin generation (RITG), which was based on dilute PT, were determined before and after ESD. Results: During the study period, 265 gastric ESDs were performed in 239 patients, where 23 and 50 patients received DXaIs and antiplatelets, respectively. Delayed bleeding occurred in 17 patients (7.4%) and 21 lesions (7.1%). The bleeding rate in the DXaI group was significantly higher than that in the other groups (30.4%, P<0.01), and the adjusted odds ratio of bleeding was 5.7 (95% confidence interval, 1.4-23.7; P=0.016). In patients using DXaIs, there was a significant (P=0.046) difference in the median RITG between bleeding cases (18.6%) and non-bleeding cases (3.8%). Conclusions: A one-day cessation of DXaIs was related to a high incidence of bleeding after gastric ESD, and monitoring of residual coagulation activity at trough levels might enable the predicted risk of delayed bleeding in patients using DXaIs.