• Journal of information and communication convergence engineering
• /
• 제14권4호
• /
• pp.227-232
• /
• 2016

In this study, the performance of a 32-quadrature amplitude position modulation (QAPM) system is analyzed under a Rician fading channel condition when the maximal ratio combining (MRC) diversity technique is used in the receiver. The fading channel is modeled as a frequency non-selective slow Rician fading channel corrupted by additive white Gaussian noise (AWGN). QAPM is available to improve BER performance without amplifying transmit power, and MRC diversity makes the performance improvement of QAPM system even bigger by intentionally maximizing SNR. Error performances are shown for the 32-QAPM system and a 32-phase silence shift keying (PSSK) system in order to examine the effects of fading severity, for various values of the Rician parameter, K. The dependence of error rates on MRC diversity is also analyzed. The simulation results show that the BER performance of the 32-QAPM system is better than that of the 32-PSSK system under the above mentioned conditions.

• 한국통신학회논문지
• /
• 제12권3호
• /
• pp.204-215
• /
• 1987

16QAM시스템에서 가우스잡음, 임펄스잡음과 동일채널의 간섭을 받았을 때의 오율식을 유도하여 컴퓨터로서 수치를 처리하고 실험에서도 반송파대 잡음전력비(CNR), 반송파대 동일채널간섭파전력비(CIR), 임펄스지수A, 가우스잡음대 임펄스잡음전력비를 파라미터로 하여 실제의 잡음 상태와 같은 환경하에서 이론해석을 입증하였다.

• Structural Engineering and Mechanics
• /
• 제44권3호
• /
• pp.267-288
• /
• 2012

Free vibration analysis of arbitrary quadrilateral thick plates with internal columns and elastic edge supports is presented by using the powerful pb-2 Ritz method and Reddy's third order shear deformation plate theory. The computing domain of arbitrary quadrilateral planform is mapped onto a standard square form by coordinate transformation. The versatile pb-2 Ritz functions defined by the product of a two-dimensional polynomial and a basic function are taken to be the admissible functions. Substituting these displacement functions into the energy functional and minimizing the total energy by differentiation, leads to a typical eigenvalue problem, which is solved by a standard eigenvalue solver. Stiffness and mass matrices are numerically integrated over the plate by using Gaussian quadrature. The accuracy and efficiency of the proposed method are demonstrated through several numerical examples by comparison and convergency studies. A lot of numerical results for reasonable natural frequency parameters of quadrilateral plates with different combinations of elastic boundary conditions and column supports at any locations are presented, which can be used as a benchmark for future studies in this area.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.60-67
• /
• 1998

This paper deals with the development of a variable-node element and its application to the adaptive h-version mesh refinement-recovery for the incompressible viscous flow analysis. The element which has variable mid-side nodes can be used in generating the transition zone between the refined and unrefined elements and efficiently used for construction of a refined mesh without generating distorted elements. A modified Gaussian quadrature is needed to evaluate the element matrices due to the discontinuity of derivatives of the shape functions used for the element. The penalty function method which can reduce the number of independent variables is adopted for the purpose of computational efficiency and the selective reduced integration is carried out for the convection and pressure terms to preserve the stability of solution. For the economical analysis of transient problems, not only the mesh refinement but also the mesh recovery is needed. The numerical examples show that the optimal mesh for the finite element analysis of a wind around the structures can be obtained automatically by the proposed scheme.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.191-194
• /
• 2002

We analyzed radiation characteristics of dipole antenna in a lossy 9round with conducting object located above ground. Electric field integral equation is used to solve the problem. In this integral equation, GPOF(Generalized Pencil of Function) method is applied to derive the closed form of the electric field due to a current source. Surface current on a conductor is expanded with a well-known vector triangle basis function. The singular integration of a triangle patch is transformed to the non-singular integration by Duffy's method. This transformed non-singular integration is easily calculated by using one-dimensional Gaussian quadrature rule, instead of usual closed form evaluation.

• 산업기술연구
• /
• 제18권
• /
• pp.267-275
• /
• 1998

Continuous thermodynamics has been applied for modeling of phase equilibria in multicomponent mixtures, to avoid disadvantages of the pseudo-component and key-component method. In this paper continuous thermodynamic relations formulated by using the Pate-Teja equation of state were adopted for calculations of phase equilibria in natural gas mixtures, crude oil mixtures and mixtures extracted by supercritical $CO_2$ fluids. Calculations of phase equilibria were performed by two procedures ; a moment method coupled with the beta distribution function and a quadrature method combined with Gaussian-Legendre polynomials. Calculated results were compared with experimental data. It was showed that continuous thermodynamic frameworks considered in this paper were well-matched to experimental data.

• Structural Engineering and Mechanics
• /
• 제11권4호
• /
• pp.443-460
• /
• 2001

This paper presents an effective application of a variable-node axisymmetric solid element designated as AQV (Axisymmetric Quadrilateral Variable-node element). The variable-node element with physical midside nodes helps to overcome some problems in connecting the different layer patterns on a quadrilateral mesh in the adaptive h-refinement. This element alleviates the necessity of imposing displacement constraints on irregular (hanging) nodes in order to enforce the inter-element compatibility. Therefore, the elements with variable mid-side nodes can be used effectively in the local mesh refinement for the axisymmetric structures which have stress concentrations. A modified Gaussian quadrature should be adopted to evaluate the stiffness matrices of the variable-node elements mainly because of the slope discontinuity of assumed displacement within the elements. Some numerical examples show the usefulness of variable-node axisymmetric elements in the practical application.

• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1438-1449
• /
• 1988

본 연구에서는 입자유동을 연속유체(continuous fluid)라 간주하는 2유체모델 을 적용하였고(Fig.2 참조), 실제 유동으로 2상난류제트유동, 관유동에 개발된 모델을 적용하여 모델의 타당성을 검토하였다.

• 한국전자파학회지:전자파기술
• /
• 제6권3호
• /
• pp.75-79
• /
• 1995

This paper derives the symbol error rate (SER) for quadrature amplitude modulation (QAM) with L-fold selection combining (SC) space diversity in Rayleigh fading channel. No analysis has been reported yet for theoretical SER performance of QAM with SC space diversity in Rayleigh fading channels. The formula is obtained by averaging the symbol error probability of M-ary QAM in an additive white Gaussian noise channel over the distribution of the maximum signal-to-noise ratio among all of the diversity channels. By giving the order of diversity, L, and the number of signal points, M, we have been able to obtain the SER performance of QAM with general SC space diversity. Analytical results show that the probability of error decreases with the order of diversity. We can also see that the incremental diversity gain per additional diversity decreases as the number of branches becomes larger.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1253-1255
• /
• 1993

Double Injection(DI) switching devices consist of p+ and n+ contact separated by a nearly intrinsic semiconductor region containing deep trap. The FEM is chosen as a simulation method for DI switching device, because of the advantage in local mesh refinement and computer memory comparing with other methods. And Scharfetter-Gummel(S-G) scheme is applied, with which an accurate-seven point Gaussian Quadrature rule is combined. The existance of deed trap requires the modification of conventional equation set. So recombination rate equation is modified and a new equation is included in the equation set which conventionally consists of Poisson equation and current continuity equations.