• 한국식품과학회지
• /
• 제38권1호
• /
• pp.59-67
• /
• 2006

본 연구에서는 곰팡이과 세균에서 유래된 ${\alpha}-amylase$와 유화제인 monogrlyceride(MG), sodium stearoyl-2-lactylate(SSL) 및 diacetyltartaric acid ester of mono- and diglycerides(DATEM)을 첨가하여 냉동반죽을 제조하고, 12주간 저장하면서 반죽의 rheofermentometer 특성 및 pH와 제빵시 비용적을 살펴보았다. 저장 기간이 증가할수록 효모의 불활성과 냉해동의 문제로 발효가 적게 일어났으나, 곰팡이와 세균에서 유래된 ${\alpha}-amylase$와 유화제를 첨가한 경우 감소율을 줄여 냉동반죽으로 안정성을 부여하였다. 저장기간 중 반죽의 pH변화에서는 저장기간이 길어질수록 냉동 반죽의 pH가 증가하였다. 저장기간에 따라 냉동반죽으로 제빵시 비용적에서는 곰팡이에서 유래된 효소와 유화제 SSL+MG를 혼합하였을 때와 세균에서 유래된 효소와 유화제 MG을 혼합하였을 때가 가장 큰 비용적을 보여주었고, 전체적으로 효소와 유화제 첨가구가 대조구에 비해서 빵의 비용적 감소를 줄이는 양상을 보였다.

• 토지주택연구
• /
• 제12권3호
• /
• pp.109-119
• /
• 2021

최근 지구 온난화로 인한 이상 기후로 인해 과거보다 더 많은 지반공학 재해들이 발생하고 있으며, 재해들의 규모도 더욱 증대되고 있다. 최근 토목 및 건설분야에 소개된 바이오폴리머 기반 흙 처리(BPST; Biopolymer-based soil treatment) 기술은 효율적으로 흙의 강도를 증진시키면서 탄소배출이 거의 없는 친환경 지반보강법으로 알려져 있다. 특히, 아가검, 젤란검, 잔탄검과 같은 열적젤화 특성을 지닌 바이오폴리머들의 강도 증진 효과가 매우 우수함이 여러 연구를 통해 밝혀지고 있다. 하지만 바이오폴리머 함량 외에는 바이오폴리머 기반 흙 처리에서 흙의 강도 증진을 제어하는 주요 영향인자 규명에 대한 연구는 많이 부족한 실정이다. 본 연구에서는 기존 발표된 열적젤화 바이오 폴리머 처리 흙의 불구속일축압축강도(UCS; Unconfined compressive strength) 자료에 대한 기계학습 기반 선형회귀 분석을 통해 젤란검 바이오폴리머로 처리된 흙의 강도 발현을 결정하는 주요 인자들을 분석하였다. 해석 결과, 바이오폴리머 함량과 더불어 흙 속 점토 함량이 강도 발현에 가장 중요한 인자임을 확인할 수 있었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권1호
• /
• pp.18-24
• /
• 2019

This study was carried out to investigate the effect of milling of boron (B), which is one of raw materials of $MgB_2$, on the critical current density ($J_c$) of $MgB_2$. B powder used in this study is semi-amorphous B (Pavezyum, Turkey, 97% purity, 1 micron). The size of B powder was reduced by planetary milling using $ZrO_2$ balls (a diameter of 2 mm). The B powder and balls with a ratio of 1:20 were charged in a ceramic jar and then the jar was filled with toluene. The milling time was varied from 0 to 8 h. The milled B powders were mixed with Mg powder in the composition of (Mg+2B), and the powder mixtures were uniaxially pressed at 3 tons. The powder compacts were heat-treated at $700^{\circ}C$ for 1 h in flowing argon gas. Powder X-ray diffraction and FWHM (Full width at half maximum) were used to analyze the phase formation and crystallinity of $MgB_2$. The superconducting transition temperature ($T_c$) and $J_c$ of $MgB_2$ were measured using a magnetic property measurement system (MPMS). It was found that $B_2O_3$ was formed by B milling and the subsequent drying process, and the volume fraction of $B_2O_3$ increased as milling time increased. The $T_c$ of $MgB_2$ decreased with increasing milling time, which was explained in terms of the decreased volume fraction of $MgB_2$, the line broadening of $MgB_2$ peaks and the formation of $B_2O_3$. The $J_c$ at 5 K increased with increasing milling time. The $J_c$ increase is more remarkable at the magnetic field higher than 3 T. The $J_c$ at 5 K and 4 T was the highest as $4.37{\times}10^4A/cm^2$ when milling time was 2 h. The $J_c$ at 20 K also increased with increasing milling time. However, The $J_c$ of the samples with the prolonged milling for 6 and 8 h were lower than that of the non-milled sample.

• 유기물자원화
• /
• 제31권3호
• /
• pp.43-53
• /
• 2023

This batch experiment evaluated the impacts of major plant nutrient releases by applying the modified Hyperbola model on the leachates and N₂O emissions from incorporated rice hull biochar with organic fertilizer materials. The treatments consisted of the control as incorporated with organic fertilizer materials, the incorporated rice hull biochar with organic fertilizer materials, and the incorporated plasma-activated rice hull biochar with organic fertilizer materials under redox conditions. The results indicated that the maximum release amount of NH₄-N was 3486.3 mg L^-1 in the control, and their reduction rates of NH₄-N, NO₃-N, PO₄-P, and K were 8.0%, 17.5% 44.3.0% and 8.7%, respectively, relative to the control. In the control, the highest soluble amount of PO₄-P was 681.0 mg L^-1. The estimations for accumulated NH₄-N, NO₃-N, PO₄-P, and K-releases in all the treatments were significantly (p<0.01) fitted with a modified Hyperbola model. For greenhouse gas emissions, the lowest cumulative N₂O was 340.4 mg kg^-1 in the soil incorporated with plasma-activated rice hull biochar, and the reduction rates were 27.8% and 86.4% in the rice hull biochar and plasma-activated rice hull biochar treatments, respectively, compared to the control. Therefore, it concluded that the incorporated rice hull biochar can be especially useful for controlling PO₄-P release and N₂O emissions for bio-fertilizer applications.

• 설비공학논문집
• /
• 제14권12호
• /
• pp.1102-1139
• /
• 2002

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2000 and 2001 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD technologies were widely applied for developing facilities and their systems. (2) Most of papers related with heat transfer analysis and heat exchanger shows dealt with convection, evaporation, and channel flow for the design application of heat exchanger. The numerical heat transfer simulation studies have been peformed and reported to show heat transfer characteristics. Experimental as well as numerical studies on heat exchanger were reported, while not many papers are available for the system analysis including heat exchanger. (3) A review of the recent studies on heat pump system shows that performance analysis and control of heat pump have been peformed by various simulations and experiments. The research papers on multi-type heat pump system increased significantly. The studies on heat pipe have been examined experimently for change of working characteristics and strut lure. Research on the phase change has been carried out steadily and operation strategies of encapsulated ice storage tank are reported experimentally in several papers. (4) A review of recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. Evaporation and condensation heat transfer characteristics are investigated for tube shapes and new alternative refrigerants. Studies on components of refrigeration/air conditioning system are carried to examine efficiency for various compressors and performance of new expansion devices. In addition to thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out, however research works on two-phase flow seemed to be insufficient. (5) A review of the recent studies on absorption cooling system indicates that heat and mass transfer phenomena have been investigated to improve absorber performance. Various experimental data have been presented and several simulation models have been proposed. A review of the recent studies on duct and ventilation shows that ventilation indices have been proposed to quantify the ventilation performance in buildings and tunnels. Main efforts have been focused on the applications of ventilation effectiveness in practice, either numerically using computational fluid dynamics or experimentally using tracer gas techniques. (6) Based on a review of recent studies on indoor thermal environment and building service systems, research issues have mainly focused on many innovative ideas such as underfloor air-conditioning system, personal environmental modules, radiant floor cooling and etc. Also, the new approaches for minimizing energy consumption as well as improving indoor environmental conditions through predictive control of HVAC systems, various activities of building energy management and cost-benefit analysis for economic evaluation were highlighted.

• Tuberculosis and Respiratory Diseases
• /
• 제40권5호
• /
• pp.540-547
• /
• 1993

연구배경 : 통상적인 폐기능 검사에 이상이 없는 초기단계의 단순 진폐증 환자들에서 세소기관지의 기능장애를 조기발견하는데 유용한 방법으로 알려진 등기류용량을 측정하여 분진작업에 기인한 세소기도 장해 여부를 알아보고 진폐증 환자들을 조기 관리하는데 등기류용량 측정의 적용에 대한 타당성 여부를 알아보고자 하였다. 방법 : FEV1 80% 이상, FEV1/FVC 75% 이상인 분진폭로군 67명과 분진폭로력이 없는 20명을 대상으로 실내 공기 흡입 및 80% Helium과 20% 산소의 혼합가스 흡입 후 측정한 각각의 최대호출기류량곡선(maximal expiratory flow volume cuve)에서 ${\Delta}V_{max50},\;{\Delta}V_{max75},\;V_{iso}V/VC$을 구하여 진폐증 category 별로 대조군과 비교하였다. 결과: 1) 대조군에 비하여 전체 분진폭로군에서 ${\Delta}V_{max50}$과 ${\Delta}V_{max75}$은 유의한 차이가 없었지만 $V_{iso}V/VC$은 현저하게 (p<0.01)증가되어 $V_{iso}V/VC$이 세소기도의 기능장해를 조기발견하는데 가장 유용한 지수임을 알 수 있었다. 2) 비흡연자를 포함한 분진폭로군과 흡연자만으로 이루어진 분진폭로군에서 $V_{iso}V/VC$의 분석결과가 매우 상이한 것으로 보아 흡연이 세소기관지병변을 초래하는데 중요한 요인으로 작용하였다. 4) 분진폭로군에서 흉부방사선사진상 진폐음의 조밀도가 증가함에 따라 $V_{iso}V/VC$이 증가되었으나 각각의 categry에서는 서로간에 유의한 차이가 없어 진폐음영의 조밀도와 세소기도 장해와는 유의한 연관성이 없었다. 4) 분진작업에 종사한 근무 기간과 $V_{iso}V/VC$의 증가와는 유의한 연관성이 없었다. 결론 : 단순진폐중 환자들에서 통상적인 폐기능검사에 이상소견이 없는 경우 등기류용량($V_{iso}V/VC$)을 측정하여 세소기도의 기능장애를 파악함으로써 진폐증의 조기관리에 도움이 될것으로 생각된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권1호
• /
• pp.50-57
• /
• 2015

This study was conducted to investigate the effect of soybean meal (SM) and soluble starch (SS) on biogenic amine production and microbial diversity using in vitro ruminal fermentation. Treatments comprised of incubation of 2 g of mixture (expressed as 10 parts) containing different ratios of SM to SS as: 0:0, 10:0, 7:3, 5:5, 3:7, or 0:10. In vitro ruminal fermentation parameters were determined at 0, 12, 24, and 48 h of incubation while the biogenic amine and microbial diversity were determined at 48 h of incubation. Treatment with highest proportion of SM had higher (p<0.05) gas production than those with higher proportions of SS. Samples with higher proportion of SS resulted in lower pH than those with higher proportion of SM after 48 h of incubation. The largest change in $NH_3$-N concentration from 0 to 48 h was observed on all SM while the smallest was observed on exclusive SS. Similarly, exclusive SS had the lowest $NH_3$-N concentration among all groups after 24 h of incubation. Increasing methane ($CH_4$) concentrations were observed with time, and $CH_4$ concentrations were higher (p<0.05) with greater proportions of SM than SS. Balanced proportion of SM and SS had the highest (p<0.05) total volatile fatty acid (TVFA) while propionate was found highest in higher proportion of SS. Moreover, biogenic amine (BA) was higher (p<0.05) in samples containing greater proportions of SM. Histamines, amine index and total amines were highest in exclusive SM followed in sequence mixtures with increasing proportion of SS (and lowered proportion of SM) at 48 h of incubation. Nine dominant bands were identified by denaturing gradient gel electrophoresis (DGGE) and their identity ranged from 87% to 100% which were mostly isolated from rumen and feces. Bands R2 (uncultured bacterium clone RB-5E1) and R4 (uncultured rumen bacterium clone L7A_C10) bands were found in samples with higher proportions of SM while R3 (uncultured Firmicutes bacterium clone NI_52), R7 (Selenomonas sp. MCB2), R8 (Selenomonas ruminantium gene) and R9 (Selenomonas ruminantium strain LongY6) were found in samples with higher proportions of SS. Different feed ratios affect rumen fermentation in terms of pH, $NH_3$-N, $CH_4$, BA, volatile fatty acid and other metabolite concentrations and microbial diversity. Balanced protein and carbohydrate ratios are needed for rumen fermentation.

• 설비공학논문집
• /
• 제22권7호
• /
• pp.492-507
• /
• 2010

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2009. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery and piping, and new and renewable energy. Various topics were covered in the field of general thermal and fluid flow such as an expander, a capillary tube, the flow of micro-channel water blocks, the friction and anti-wear characteristics of nano oils with mixtures of refrigerant oils, etc. Research issues mainly focused on the design of micro-pumps and fans, the heat resistance reliability of axial smoke exhaust fans, and hood systems in the field of fluid machinery and piping. Studies on ground water sources were executed concerning two well type geothermal heat pumps and multi-heat pumps in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included the heat transfer in thermoelectric cooling systems, refrigerants, evaporators, dryers, desiccant rotors. In the area of industrial heat exchangers, researches on high temperature ceramic heat exchangers, plate heat exchangers, frosting on fins of heat exchangers were performed. (3) In the field of refrigeration, papers were presented on alternative refrigerants, system improvements, and the utilization of various energy sources. Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and $CO_2$ were studied. Efforts to improve the performance of refrigeration systems were made applying various ideas of suction line heat exchangers, subcooling bypass lines and gas injection systems. Studies on heat pump systems using unutilized energy sources such as river water, underground water, and waste heat were also reported. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. In the area of cogeneration systems, papers on energy and economic analysis, LCC analysis and cost estimating were reported. Studies on ventilation and heat recovery systems introduced the effect on fire and smoke control, and energy reduction. Papers on district cooling and heating systems dealt with design capacity evaluation, application plan and field application. Also, the maintenance and management of building service equipments were presented for HVAC systems. (5) In the field of architectural environment, various studies were carried to improve indoor air quality and to analyze the heat load characteristics of buildings by energy simulation. These studies helped to understand the physics related to building load characteristics and to improve the quality of architectural environment where human beings reside in.

• Korean Chemical Engineering Research
• /
• 제46권5호
• /
• pp.988-993
• /
• 2008

고정층 반응기에 충진한 $NaClO_2$에 의한 NO 산화특성을 온도와 가스조건 그리고 공간속도 등을 변화시켜가며 알아보았다. $NaClO_2$와 NO의 반응은 온도에 크게 의존함을 알 수 있었다. $110^{\circ}C$까지 $NaClO_2$와 NO의 반응성은 천천히 증가하고 그 이후의 온도에서는 빠르게 증가하였으며 $170^{\circ}C$ 부근에서 가장 높은 반응성을 나타내는 것을 확인하였다. 하지만 $190^{\circ}C$ 이상의 온도에서는 $NaClO_2$가 NaCl, $NaClO_3$, 상전이하여 NO와의 반응성이 나타나지 않았다. $NaClO_2$와 NO 반응의 주 생성물은 $NO_2$였으며 가스상 형태의 ClNO, $ClNO_2$ 등이 부산물로 나타났다. 이는 $NaClO_2$에 의한 NO의 산화물인 $NO_2$와 $NaClO_2$가 반응하여 가스상 부산물인 OClO를 생성하고, 생성된 OClO가 잔류하는 NO를 $NO_2$로 산화시키며 발생되는 Cl에 의한 것임을 확인하였다. 이와 함께 수분 및 산소의 변화는 NO 산화에 주는 영향이 미미하다는 것을 알 수 있었다.

• 설비공학논문집
• /
• 제20권12호
• /
• pp.844-861
• /
• 2008

The papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during the year of 2007 have been reviewed. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro nano fluid, micropump and fuel cell. Traditional CFD was still popular and widely used in research and development. Studies about fans and pumps were performed in the field of fluid machinery. Characteristics of flow and fin shape optimization are studied in the field of piping system. (2) The research works on heat transfer have been reviewed in the field of heat transfer characteristics, heat exchangers, and desiccant cooling systems. The research on heat transfer characteristics includes thermal transport in pulse tubes, high temperature superconductors, ground heat exchangers, fuel cell stacks and ice slurry systems. For the heat 'exchangers, the research on pin-tube heat exchanger, plate heat exchanger, condensers and gas coolers has been cordially implemented. The research works on heat transfer augmenting tubes have been also reported. For the desiccant cooling systems, the studies on the design and operating conditions for desiccant rotors as well as performance index are noticeable. (3) In the field of refrigeration, many papers were presented on the air conditioning system using CO2 as a refrigerant. The issues on the two-stage compression, the oil selection, and the appropriate oil charge were treated. The subjects of alternative refrigerants were also studied steadily. Hydrocarbons, DME and their mixtures were considered and various heat transfer correlations were proposed. (4) Research papers have been reviewed in the field of building facilities by grouping into the researches on heat and cold sources, air conditioning and air cleaning, ventilation and fire research including tunnel ventilation, flow control of piping system, and sound research with drain system. Main focuses have been addressed to the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies were mostly focused on analyzing the indoor environment in various spaces like cars, old tombs, machine rooms, and etc. in an architectural environmental field. Moreover, subjects of various fields such as the evaluation of noise, thermal environment, indoor air quality and development of energy analysis program were researched by various methods of survey, simulation, and field experiment.