• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.535-536
• /
• 2009

This paper presents a new approximation for the crystalline lens of the human eye with refracting surfaces based on schematic eye during accommodation. A new model eye describes the iso- indical profiles in the form of symmetric spherical surfaces. A vary important condition which was imposed upon the parameters (thickness, radius) was the lens volume conservation during accommodation.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.463-465
• /
• 2000

부분 정제한 VHb-DAO와 CPC를 30분 이상 반응시키면 CPC가 GL-7ACA로 80%이상 변환되었다. VHb-DAO와 D-form의 아미노산이 반응한 결과 $K_m$은 D-Methionine, D-Valine이 낮으며, $V_{max}$는 D-${\alpha}$-aminophenylacetic acid, D-Leucine, D-Phenyalanine가 높은 수치를 나타내었다.

• Magazine of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.15-20
• /
• 2002

갱폼이라 함은 주로 고층 아파트에서와 같이 평면상 상ㆍ하부 동일 단면 구조물에서 외부벽체 거푸집과 거푸집 설치ㆍ해체작업 및 미장ㆍ치장(견출) 작업발판용 케이지(cage)를 일체로 제작하여 사용하는 대형 거푸집을 말한다. 여기서 케이지는 갱폼에서 외부벽체 거푸집 부분을 제외한 부분으로 거푸집 설치ㆍ해체작업, 후속 미장, 치장(견출) 등 작업을 안전하게 수행하는데 필요한 작업발판, 안전난간 등으로 구성되어 갱폼 거푸집에 결합된 부분이며, 상부 케이지는 갱품 케이지의 4단 작업발판 중 거푸집 설치ㆍ해체작업용으로 사용되는 상부 2단 작업발판 구성 부분이고, 하부 케이지는 미장ㆍ치장(견출) 작업용으로 사용되는 하부 2단 작업발판 구성 부분을 말한다.(중략)

• Applied Biological Chemistry
• /
• v.1
• /
• pp.26-33
• /
• 1960

Organic mercurial fungicides, for seed treatments and dust formulations, has been increasingly used by farmers. Evaluation of the purity of organic mercurial fungicides has been performed by precipitation method at this laboratory. There are several methods for the an alyses of organic mercuric formulation, among which are (1) Precipitation met hod, (2) Volatilization method, (3) Volumetric method, and (4) Dithizon method. These methods, however, show some deffects in specificity (differentiation of organic form) and quantitativity. Polarography applied for the estimation of phenyl mercuric acetate was found to be simple, rapid and accurate. Tile fundamental method of polarography arid accuracy of analysis are discussed statistically and a satisfactory results was obtained.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.313-316
• /
• 2002

In this paper, we present an online scheme for parameter estimation of solar cell, based on the model adjustment technique and a genetic algorithm. The ideal diode model and the diode model with series and shunt resistor are used to estimate their parameters. Simulation works using field data in the form of a VI characteristic curve are carried out to demonstrate the effectiveness of the proposed method.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.429-430
• /
• 2008

This paper presents a new approximation for the crystalline lens of the human eye with refracting surfaces based on Gullstrand-Emsley schematic eye during accommodation. A new model eye describes the isoindical profiles in the form of symmetric spherical surfaces. A vary important condition which was imposed upon the parameters (thickness, radius) was the lens volume conservation during accommodation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.11-12
• /
• 2012

This study investigates the temperature rise of reinforcement bars located in the middle of the form (for reinforcement concrete) during hot weather condition. The temperature was measured for three consecutive days before placing concrete. Test results showed that the temperature started to increase at 7:00 AM before sun rised, and peaked at around 2:00 PM. It was found that the thinner the diameter of a reinforcement bar, the higher is the speed of temperature rise and drop of the bar. The peak level of temperature for D13, D19, D25 and D32 was 54.4℃, 55.2℃, 56.4℃ and 60.2℃, respectively.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2001.11a
• /
• pp.121-126
• /
• 2001

In this paper, for n = 2m and odd prime p, new generalized bent functions from the finite field F$\_$p$^n$/ to the prime field F$\_$p/ are constructed from the partial spreads for F$\_$p$^n$/. Closed form expressions for the proposed generalized bent functions and their trace transform are derived in the form of the trace functions. The trace expressions for the bent functions and their trace transforms defined on F(equation omitted) constructed by using PS- are also derived.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2688-2691
• /
• 2008

This study addresses a microfluidic method to uniformly form diacetylene (DA) liposomes and control their size. DA liposomes are biochemical sensor materials with a unique property such that when they are polymerized to polydiacetylene (PDA) they exhibit non-fluorescent blue to fluorescent red phase transition upon chemical or thermal stress. The liposome size and distribution are important because they significantly affect the phase transition. So far, DA Liposomes, have been prepared by mixing of bulk phases leading to heterogeneous, polydisperse distribution in size. Therefore, additional post-processes are required such as sonication or membrane extrusion to obtain an appropriate size of liposomes. Here, we report a novel strategy using a microfluidic chip and hydrodynamic focusing to form DA liposomes and control their size. Preliminary results obtained by scanning electron microscope (SEM) and dynamic light scattering (DLS) show that the microfluidic strategy generates more monodispersed liposomes than a bulk method.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.2
• /
• pp.127-134
• /
• 2017

In this study, moist curing equipment was used in the exist gang-form system. By achieving sufficient spray curing, the quality of the concrete was improved and the cracking occurred in building's side wall was decreased. The following results could be made as the conclusion. For the compressive strength, all zones showed the similar results. Comparing with the zone without using moist curing equipment, the zone used moist curing equipment showed higher rebound hardness results. For the cracking, the zone utilized moist curing equipment showed the cracking averaged as 6.6 m and the zone without using moist curing equipment showed the cracking averaged as 10.3m. The effectof reducing cracking by utilizing moist curing equipment is about 36 %. Using moist curing equipment is considered as a good solution to reduce the cracking in the structure. Considering all the factors analysed, using moist curing equipment improved the quality of the concrete and decreased the cracking. When this equipment was used in the construction site, it is expected that the construction periodcan be shrunk and the ratio of defect caused by drying shrinkage can be decreased. In this research conditions, The 0.3mm sized moist curing equipment provided the most desirable results on concrete quality and preventing cracking.