• 제목/요약/키워드: Gain

검색결과 15,552건 처리시간 0.037초

임신 중 체중증가에 따른 영양섭취 및 임신결과와의 관련성 (Association of Nutrient Intake and Pregnancy Outcome with Gestational Weight Gain)

  • 한영선;이상선
    • Journal of Nutrition and Health
    • /
    • 제43권2호
    • /
    • pp.141-151
    • /
    • 2010
  • Gestational age and infant birth weight are influenced by gestational weight gain. This study was aimed to examine the effects of gestational weight gain on pregnancy outcomes. Pregnant women were recruited at two hospitals in Seoul area. Characteristics and dietary intakes of pregnant women were obtained using 24-hour recall questionnaires. Gestational weight gain was categorized as less (Under-gain) than, within (Recommended gain), or greater (Over-gain) than the Institute of Medicine guidelines. Maternal height and pre-pregnancy weight in the over-gain group significantly higher than under-gain and recommended gain group. Mini dietary assessment score of eating bean has significantly higher in under-gain group than recommended gain group and eating kimchi has significantly higher in undergain group than over-gain group. Score of eating fruit was significantly higher in over-gain group than other groups. The mean intake of carbohydrate in the recommended gain group were significantly higher than under-gain group, and mean intake of potassium in the over-gain group were significantly higher than under-gain group. Under-gain group showed the high rate of the preterm delivery and low birth weight infant delivery. However recommended gain group showed 46% reduced risk of preterm delivery (OR = 0.54 CI = 0.30-0.98). Risk of macrosomia increased with increasing gestational weight gain (p for trend < 0.05). In conclusion, pregnancy outcomes were influenced by gestational weight gain. Therefore, these finding suggested adequate gestational weight gain according to BMI for reducing the risk of preterm delivery, low birth weight and macrosomia.

다중 표준 시스템을 위한 이득 곡선 제어기를 가진 가변이득 증폭기 설계 (Design of Variable Gain Amplifier with a Gain Slope Controller in Multi-standard System)

  • 최문호;이원영;김영석
    • 한국전기전자재료학회논문지
    • /
    • 제21권4호
    • /
    • pp.321-328
    • /
    • 2008
  • In this paper, variable gain amplifier(VGA) with a gain slope controller has been proposed and verified by circuit simulations and measurements. The proposed VGA has a gain control, gain slope switch and variable gain range. The input source coupled pair with diode connected load is used for VGA gain stage. The gain slope controller with switch can control VGA gain slope. The proposed VGA is fabricated in $0.18{\mu}m$ CMOS process for multi -standard wireless receiver. The proposed two stage VGA consumes min. 2.0 mW to max. 2.6 mW in gain control range and gives input IP3 of -3.77 dBm and NF of 28.7 dB at 1.8 V power supply under -25 dBm, 1 MHz input. The proposed VGA has 37 dB(-16 dB $\sim$ 21 dB) variable gain range, and 8 dB gain range control per 0.3 V control voltage, and can provide variable gain, positive and negative gain slope control, and gain range control. This VGA characteristics provide design flexibility in multi-standard wireless receiver.

비정질 실리콘을 이용한 방사선 계측시 Photoconductive Gain의 특성

  • 이형구;신경섭
    • 대한의용생체공학회:의공학회지
    • /
    • 제18권3호
    • /
    • pp.307-313
    • /
    • 1997
  • 비정질 실리콘에서의 photoconductive gain mechanism을 방사선 계측시 이용하기 위한 연구를 수행하였다. p-i-n, n-i-n, n-i-p-i-n과 같은 여러 형태의 비정질 실리콘 계측기를 제작하고 시험하였다. Photoconductive gain은 두 가지의 시간적 범위에서 측정하였다. : 하나는 고에너지의 하전입자나 감마선의 통과를 모사하기 위해서 $1{\mu }$ sec 보다 짧은 가시광선 펄스를 사용하였고, 다른 하나는 의학영상에 사용되는 x-선을 모사하기 위하여 보다 긴 1msec 정도의 가시광선 펄스를 사용하였다. 두 가지의 photoconductive gain-current gain과 charge gain-을 정의하여 실험하였으며, charge gain은 current gain을 시간에 따라 적분한 값이다. 10 mA/$cm^2$의 dark current density level에서, 짧은 펄스에 대해서는 3~9정도의 charge gain을 얻을 수 있었고 긴 펄스에 대해서는 수백의 charge gain을 얻을 수 있었다. 여러 가지의 gain에 대한 결과를 계측기의 구조, 부가전압, dark current density와의 관계를 통하여 논의하였다.

  • PDF

포화 구동기를 갖는 선형 시스템의 이득 스케듈링 제어기 설계 (Design of Gain Scheduled Controllers for Linear Systems with Saturating Actuators)

  • 송용희;김진훈
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제52권9호
    • /
    • pp.511-519
    • /
    • 2003
  • In this paper, we considered the design of gain scheduled controllers for linear systems with saturating actuators. Our basic idea is to design a control that uses higher control gain when the states are smaller, and lower gain when it is higher. By doing this, we can avoid the saturation and we can improve the performance. First, we derive a control and a reachable set expressed as LMI form, which minimizes not only the L$_2$ gain from the disturbance to the measured output but also the control is never saturated within this reachable set. Next, the reachable set is divided as nested subsets, and at each nested subset, the control gain is designed to minimize the L$_2$ gain and it is never saturated. Finally, the control gain is scheduled according to the status of states, i.e., the subset in which the states are located. A numerical example is presented to show that our gain scheduled control significantly improves the performance.

임신 중 체중증가에 따른 식습관 비교 - IOM 권고기준을 중심으로 - (Comparison of Eating Habits Based on Weight Gain during Pregnancy: Centered on Recommended Standards of the Institute of Medicine)

  • 오정신;조미숙
    • 대한영양사협회학술지
    • /
    • 제17권2호
    • /
    • pp.99-117
    • /
    • 2011
  • The purpose of this study was to investigate weight gain during pregnancy based on pre-pregnant Body Mass Index, to compare eating habits based on the recommended standards for weight gain presented by the Institute of Medicine, and to identify factors affecting the weight gain of pregnant women. The subjects were grouped into three categories according to the recommended weight gain standards presented by the Institute of Medicine: the inadequate group, the adequate group and the excessive group. The excessive group had a significantly higher pre-pregnant Body Mass Index than that of the two other groups. Based on a comparison of the eating habits and nutrient intake of the women to the recommended standards for weight gain, the excessive gain group had large meals and ate more frequently outside of the home when compared to the pre-pregnancy period. Based on an analysis of correlations between weight gain during pregnancy and diet factors, the adequate gain group had positive correlation between weight gain and a "balanced meal" and had negative correlation with "convenience meals". The excessive gain group had a positive correlation with "convenience meals" and had a negative correlation with "meal skipping." All the pregnant women were more frequent in the "overeating categories" and all ate more "fruit," as their weight gain was higher. In particular, the excessive gain group was frequently evaluated as "overeating". These results indicate that the factors affecting weight gain during pregnancy were the Body Mass Index before pregnancy, eating types, and eating habits. As the Body Mass Index before pregnancy was higher, the ingestion of a 'balanced meal' was less, and overeating and gluttony were more frequent. Therefore weight gain was enhanced.

센서없는 직류서보전동기의 속도 제어를 위한 적응 고이득 관측기 설계 (Design of a Adaptive High-Gain Observer for Speed-Sensorless Control of DC Servo Motor)

  • 김상훈;김낙교
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제52권12호
    • /
    • pp.663-670
    • /
    • 2003
  • This paper deals with speed control of DC servo motor using a Adaptive high gain obserber. In this parer, the gain of the observer is properly set up using the fuzzy control and adaptive high gain observer that have a superior transient characteristic and is easy to implement compared the existing method is designed. In order to verify the performance of the Adaptive high gain observer which is proposed in this paper, it is compared estimate performance of High-gain Observer and Adaptive High Gain Observer with the computer simulation. Effectiveness of the proposed high gain observer is proved from the experiment to compare the case with a speed sensor to the case with Adaptive high gain observer in the speed control of DC servo motor.

A SiGe HBT Variable Gain Driver Amplifier for 5-GHz Applications

  • 채규성;김창우
    • 한국통신학회논문지
    • /
    • 제31권3A호
    • /
    • pp.356-359
    • /
    • 2006
  • A monolithic SiGe HBT variable gain driver amplifier(VGDA) with high dB-linear gain control and high linearity has been developed as a driver amplifier with ground-shielded microstrip lines for 5-GHz transmitters. The VGDA consists of three blocks such as the cascode gain-control stage, fixed-gain output stage, and voltage control block. The circuit elements were optimized by using the Agilent Technologies' ADSs. The VGDA was implemented in STMicroelectronics' 0.35${\mu}m$ Si-BiCMOS process. The VGDA exhibits a dynamic gain control range of 34 dB with the control voltage range from 0 to 2.3 V in 5.15-5.35 GHz band. At 5.15 GHz, maximum gain and attenuation are 10.5 dB and -23.6 dB, respectively. The amplifier also produces a 1-dB gain-compression output power of -3 dBm and output third-order intercept point of 7.5 dBm. Input/output voltage standing wave ratios of the VGDA keep low and constant despite change in the gain-control voltage.

적응 퍼지 고이득 관측기를 이용한 교류 서보 전동기 제어 (Control of AC Servo Motor Using Adaptive Fuzzy High Gain Observer)

  • 김상훈;윤광호;고봉운;김낙교
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.53-55
    • /
    • 2004
  • This paper deals with speed control of AC servo motor using a Adaptive fuzzy high gain observer. In this parer, the gain of the observer is properly set up using the fuzzy control and adaptive high gain observer that have a superior transient characteristic and is easy to implement compared the existing method is designed. In order to verify the performance of the Adaptive fuzzy high gain observer which is proposed in this paper, it is compared estimate performance of High-gain Observer and Adaptive High Gain Observer with the computer simulation. Effectiveness of the proposed high gain observer is proved from the experiment to compare the case with a speed sensor to the case with Adaptive fuzzy high gain observer in the speed control of AC servo motor.

  • PDF

The Gain Estimation of a Fabry-Perot Cavity (FPC) Antenna with a Finite Dimension

  • Kwon, Taek-Sun;Lee, Jae-Gon;Lee, Jeong-Hae
    • Journal of electromagnetic engineering and science
    • /
    • 제17권4호
    • /
    • pp.241-243
    • /
    • 2017
  • In this paper, we have presented an equation for estimating the gain of a Fabry-Perot cavity (FPC) antenna with a finite dimension. When an FPC antenna has an infinite dimension and its height is half of a wavelength, the maximum gain of that FPC antenna can be obtained theoretically. If the FPC antenna does not have a dimension sufficient for multiple reflections between a partially reflective surface (PRS) and the ground, its gain must be less than that of an FPC antenna that has an infinite dimension. In addition, the gain of an FPC antenna increases as the dimension of a PRS increases and becomes saturated from a specific dimension. The specific dimension where the gain starts to saturate also gets larger as the reflection magnitude of the PRS becomes closer to one. Thus, it would be convenient to have a gain equation when considering the dimension of an FPC antenna in order to estimate the exact gain of the FPC antenna with a specific dimension. A gain versus the dimension of the FPC antenna for various reflection magnitudes of PRS has been simulated, and the modified gain equation is produced through the curve fitting of the full-wave simulation results. The resulting empirical gain equation of an FPC antenna whose PRS dimension is larger than $1.5{\lambda}_0$ has been obtained.

고속 동작을 위한 디지털 자동 이득 제어기 설계 (Design of Digital Automatic Gain Controller for the High-speed Processing)

  • 이봉근;이영호;강봉순
    • 융합신호처리학회논문지
    • /
    • 제2권4호
    • /
    • pp.71-76
    • /
    • 2001
  • 본 논문에서는 5GHz 대역을 사용하는 고속 무선 LAN의 표준안의 IEEE 802.11a-1999 를 위한 디지털 자동 이득 제어기를 제언한다. 송수신간의 동기화를 위한 신호인 training symbol을 이용하여 수신기에 입력되는 신호의 이득을 측정한다. 측정된 이득을 이상적인 이득과 비교하여 갱신할 이득을 구한다. 갱신 이득은 신호를 증폭하는 GCA(Gain Controlled Amplifer)의 입력 전압으로 변환되어 신호의 증폭도를 제어하게 된다. 본 논문에서는 하드웨어 부담을 줄이기 위해 부분 선형 근사방법을 이용하여 갱신 이득을 본 논문에서 제안한 디지털 자동 이득 제어기는 VHDL을 이용하여 설계하였으며, Xilinx cAD tool을 이용하여 timing verification을 수행하였다.

  • PDF