• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.1 s.19
• /
• pp.51-57
• /
• 2002

GPS proved to very practical in the application of geodesy and surveying such Civil Engineering, control point surveying and the deformation surveying o( structure, but the accuracy of static GPS positioning is degraded at the sites which the visible satellites of GPS are less than 4, i.e. the urban area covered with the high building and the industrial zone. Thus, the combined GPS/GLONASS system was introduced to acquire the high accuracy of static positioning by a few satellites. So the combined GPS/GLONASS system show the good results at the sites which the accuracy of positioning is degraded due to few satellites, the cutoff of signal, and multipath in the urban area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.5
• /
• pp.379-388
• /
• 2019

Recently, a technique for acquiring spatial information data using UAV (Unmanned Aerial Vehicle) has been greatly developed. It is a very crucial issue of the GIS (Geographic Information System) mapping system that passes way point in the unmanned airframe and finally measures the accurate image and stable localization to the desired destination. Though positioning using DGPS (Differential Global Navigation System) or RTK-GPS (Real Time Kinematic-GPS) guarantee highly accurate, they are more expensive than the construction of a single positioning system using a single GPS. In the case of a low-priced single GPS system, the stability of the positioning data deteriorates. Therefore, it is necessary to supplement the uncertainty of the absolute position data of the UAV and to improve the accuracy of the current position data economically in the operating state of the UAV. The aim of this study was to present an algorithm enhancing the stability of position data in a single GPS mode of UAV with multiple GPS. First, the arrangement of multiple GPS receivers through the center of gravity of the UAV were examined. Next, MD (Mahalanobis Distance) is applied to detect instantaneous errors of GPS data in advance and eliminate outliers to increase the accuracy of previously collected multiple GPS data. Processing procedure for multiple GPS reception data by applying the center of the triangular method were presented to improve the position accuracy. Second, UAV navigation systems integrated multiple GPS through configuration of the UAV specifications were implemented. Using the unmanned airframe equipped with multiple GPS receivers, GPS data is measured with the TCM (Triangular Center Method). In addition, UAV equipped with multiple GPS were operated in study area and locational accuracy of multiple GPS of UAV with VRS (Virtual Reference Station) GNSS surveying were compared. The result showed that the error factors are compensated, and the error range are reduced, resulting in the reliability of the corrected value. In conclusion, the result in this paper is expected to realize high-precision position estimation at low cost in UAV using multiple low-cost GPS receivers.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.3
• /
• pp.259-268
• /
• 2006

The use of GPS receiver at outer space becomes common in low earth orbit. Recently most of satellites use GPS receiver as navigation solution for finding satellite position. However, the accuracy of navigation solution acquiring directly from GPS receiver is not enough in satellite application such as map generation. Post-processing concepts such as Precise Orbit Determination (POD) are recently applied to satellite data processing to improve satellite position accuracy. The POD uses raw measurement data instead of navigation solution of GPS receiver. The performance of raw measurement data depends on raw measurement data accuracy and tracking loop algorithm of GPS receiver. In this paper, a method for evaluating performance of raw measurement data is suggested. Test environment and procedure of the low earth orbit satellite acquiring for navigation solution of GPS receiver and navigation solution of POD are described. In addition, accuracy on navigation solution of GPS receiver, raw measurement data, and navigation solution of POD are analyzed. The proposed method can be applicable to general low earth orbit satellite.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.89-95
• /
• 2009

The accuracy and efficiency of RTK-GPS is proved through its measurement, but it is not used in cadastral detail surveying, due to low accuracy caused by the trouble of satellite reception in a built-up area and lack of detailed guidelines for practical application. Thus, this study tries to offer detailed directions for the practical use of RTK-GPS by analyzing the application problem of RTK-GPS measurement. As results of the study, for the practical use of RTK-GPS it suggests enactment of regulations, connection of practical RTK-GPS measurement with the existing detail surveying methods, introduction of a VRS method for increasing the arrangement density of reference stations, and integrated use of GPS, GLONASS and Galileo satellites for securing accuracy and stability.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.177-180
• /
• 2010

In cadastral field GPS mainly applies to fundamental survey, while there are numerous research about cadastral detail survey using GPS application in order to increase surveying efficiency as survey technology improve. The purpose of this experiment is to analyze the accuracy of position and estimate the efficiency of GPS/GLONASS combination surveying with control points. As the result of this experiment, Network RTK-GPS/GLONASS combination survey is superior to Newtork RTK-GPS with respect to position accuracy and work efficiency.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.37-42
• /
• 2009

The accuracy of RTK GPS is limited by the distance dependent errors from orbit, ionosphere and troposphere, as the distance between the rover and the base station increases in the Real Time Kinematic surveying. To solve this problem, VRS system has installed. This study would estimated the accuracy of cadastral detail surveying, which is used on the VRS RTK instead of Total Station and RTK GPS demand for various equipments and time. As a result of study, the positioning accuracy of the VRS RTK and RTK GPS surveying make no greate difference, as RMSE of VRS RTK surveying is 0.144m and that of RTK GPS surveying is 0.146m and the new method would be more efficient.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2382-2386
• /
• 2003

The Global Positioning System(GPS) is a satellite based precise positioning system avaliable worldwide. The GPS have many error sources. The earth's ionosphere and atmosphere cause delays in the GPS signal that translate into position errors. Some errors can be factored out using mathematics and modeling. The configuration of the satellites in the sky can magnify other errors. The problem of accuracy on GPS measurement data can be meaningful. In this study, we propose the method for GPS positioning accuracy improvement. The FUZZY set theory on PDOP(Position Dilution of Precision) and SNR(Signal to Noise Ratio) provide improved for measured positioning data. The accuracy of positioning has been improved by selecting data from original using the FUZZY set theory on PDOP and SNR.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.94-100
• /
• 2013

This study is to analyze the accuracy of position determination in cadastral surveying using VRS GNSS(GPS/GLONASS), and is to suggest a possibility to improvement of accuracy in decision making of cadastral surveying result based on this result. As a result of this study, the position accurate of this study, which decides position combining with GPS/GLONASS satellite data is about 3cm more accurate than using only GPS satellite data. Therefore, if GNSS integrated receiving method is to be applied on cadastration, it can be expected to improve to estimate the position accuracy.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.213-223
• /
• 2009

In geoid modelling field, it is very important the GPS/leveling data because it could be check-out the accuracy of gravimetric geoid and computed the hybrid geoid. In this study, GPS surveying was accomplished in the test area including mountainous area to improve the GPS/leveling data density in Korea. And the geometric geoidal heights was calculated using the GPS/leveling data in the test area and the accuracy of the geoidal heights was analyzed. For this study, GPS surveying was accomplished on the 211 1st and 2nd order benchmarks in Gyeongbuk province and 198 GPS/leveling data were achieved after both baseline analysis and network adjustment. Geometric geoidal heights were calculated using these 198 GPS/leveling data and the accuracy analysis was done by comparison with the geoidal heights from EGM2008 geopotential model. The results showed that the bias and standard deviation computed from 190 GPS/leveling data after gross removal was -0.185$\pm$0.079m. And also, the accuracy analyses according to the benchmark order, baseline length, and altitude were accomplished.

• Korean Journal of Geomatics
• /
• v.2 no.2
• /
• pp.99-105
• /
• 2002

The accuracy of the Digital Photologging System, designed for the construction of the road Facility Database, highly depends on the positions and attitudes of the cameras from GPS/INS integration. In this paper, the development of a loosely coupled GPS/INS is presented. The performance of the system is verified through a simulation as well as a real test data processing. Since the IMU used in this study shows large systematic errors, the possible accuracy of the positions and attitudes of this low-performance IMU when combined with precise GPS positions are assigned. Currently, the integrated system shows the positional accuracy better than 5cm in real data processing. Although the accuracy of attitude based on real test could not be assigned at this time, it is expected that better than 0.5 degrees and 1.8 degrees for horizontal and down component are achievable according to the simulation result.