• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.2
• /
• pp.68-73
• /
• 2012

This paper is an analysis the performance of CDMA system using array antenna beamforming technique in wireless channels. Adaptive array beamforming antenna technique combine receive signal amplitude with phase in array antenna element, and can be incremental spatial filter function a direction of arrival signal using weight value. Through simulation, in this paper, we were an analysis to compare bit error rate of forward and backward channels using array antenna beamforming technique in order to interference signal decrease of CDMA fading enviroment. The result simulation, we get spatial diversity effect by using array antenna system, and improved the performance to MAI interference decrease.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.8
• /
• pp.77-84
• /
• 2003

Structural analyses of a turbine bladed-disk for a liquid rocket turbopump are peformed to investigate the safety level of strength and vibration at design point. Due to the high rotational speed of the turbopump, effects of centrifugal forces are carefully considered in the structural analysis. Thermal load caused by extreme temperature distribution is also considered as an external force applied to turbine bladed-disk. A three dimensional finite element method (FEM) is used for cyclic symmetry structural analyses with the MSC/NASTRAN DMAP Alter. Interblade phase angles are considered to investigate structural dynamic characteristics as a function of rotational speed. Through the numerical analysis, effects of centrifugal and thermal loads on the turbine bladed-disk are examined.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.147-151
• /
• 2008

Construction project is completed through several stages and problems of each stage affect directly not only now but also next. Defect of 2D drawings influence in construction phase, and it make many loss on project. Nowadays we practically use real Mock-up test in construction sites to solve the problems. But it also has many problems which are waste much money and time. Therefore, this study tries to analyze effect that is occurred by appling BIM Mock-up simulation instead of real Mock-up execution. These analysis is conducted by comparing two construction building site. These have same shape but one is made for BIM Mock-up, and another is real Mock-up. Comparison points of view are cost, time and operator's satisfaction. It is expect that BIM Mock-up is more effective at low cost and on shorter time. But our analysis show that each are conducted different part of function. So new Mock-up type is required. Hybrid Mock-up is combine real mock-up with BIM simulation and it can minimize risk of project.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.139-144
• /
• 2007

To delineate subglacial and englacial images of the western Fourcade Glacier in Antarctica, GPR data were acquired along a 470 m profile in November 2006. Signature deconvolution, migration velocity analysis, and finite difference depth migration were effective in increasing vertical resolution, obtaining the velocity function, and yielding clear depth images of the mixed-phase single-channel data, respectively. The source signature was extracted through stacking reflection signals from the basement. The deconvolution successfully compressed the source signatures to increase temporal resolution and attenuated reverberations. Medium velocities were analyzed with 112 diffraction events by the constant-velocity migration method based on the Stolt algorithm. Finally, depth migration based on the finite difference algorithm provided clear englacial and subglacial images in the laterally-varying velocity field.

• Journal of Digital Convergence
• /
• v.3 no.2
• /
• pp.143-157
• /
• 2005

Many papers point out that the e-Learning is one of the most important industries, and the effect on other industries can be more powerful than any other business. Therefore, we think about social, cultural, industrial and technological effect of the e-Learning in order to enlarge industry scale as well as educational performances. In many cases of developed countries, various kinds of study have been performed for the e-Learning quality assurance because quality of the e-learning should operate on effective and efficient learning and continuous market development of education industries. The e-Learning quality assurance has import function not only for learning contents reusability like a SCORM and metadata but also for learning system, solution and service operation, so activities for the quality assurance should consider of cultural and tactical approach when it is applied in the e-learning business. In this paper, we present the concept, domain and purpose of the e-Learning quality assurance. Furthermore, this paper proposes the process and methodology in order to make the quality assurance standard model which is consist of 6 phase such as Environment Research, Needs Analysis, Framework, Metrics, Development and Implementation, Evaluation and Feedback through the analysis and comparison of pre-studied worldwide quality control, management and assurance documents.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1058-1063
• /
• 2004

This paper presents a new approach regarding thermal characteristics associated with a design of the high efficiency motor. Electrical conduction materials, such as coil and aluminum embedded in the core generate high heat exerting negative influence on both lifetime and performance of machine. Thus, it is necessary to design high efficiency motor considering heat transfer in order to improve motor performance and to be protected against overheating. In this paper, firstly, numerical analysis of electromagnetic field is carried out by the nonlinear transient finite element method (FEM). Secondly, the linear static FEA of magneto-thermal field is implemented by applying source current computed by the nonlinear transient analysis. FE results are validated in terms of electromagnetics and heat transfer by experiments. And then, the pseudo-transient topology optimization using a multi-objective function is performed. The proposed method is applied to a squirrel cage single-phase induction motor of the scroll compressor.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.1
• /
• pp.57-65
• /
• 2000

In this paper, a model reference adaptive control for the atomic force microscope (AFM) of tapping mode is investigated. The dynamics between the AFM system and al sample is mathematically modeled as a second order spring-mass-damper system with oscillatory inputs. The attractive and repulsive forces between the tip of the AFM system and the sample are derived using the Lennard-Jones potential energy. By non-dimensionalizing the displacement of the tip and the input frequency, the chaotic behavior near a resonance frequency is better depicted through the non-dimensionalized equations. Four nonlinear analysis techniques, a phase portrait, sensitive dependence on initial conditions, a power spectral density function, and a Pomcare map are investigated. Because the equations of motion derived in this paper involve unknown parameter values such as the damping effect of the air and the interaction constants between materials, the standard model reference adaptive control is adopted. Two control objectives, the prevention of chaos and the tracking of reference signal, are pursued. Simulation results are included.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1726-1728
• /
• 2003

The aging diagnosis method using partial discharge measurement detects discharge signals that critical cause of failure in insulation material operated a long time and can diagnose aging state of insulation materials with an aging analysis algorithm. The HFPD measurement method is a technique to analyze aging state of high voltage insulation materials and detect higher frequency signals than conventional PD measurement method therefore it takes less noise effect and could execute active line measurement. It is possible to analyze main discharge phenomena and obtain access to aging progress occurred in insulation materials through accumulation of HFPD signals during determined interval and expression of fractal dimension using statistical process of accumulated signals. The HFPD signals that occurred in each applied voltages are measured during 180 cycles and accumulated to the same phase of one cycle. These patterns that made by previous method are normalized with logarithm function and than inputted to neural networks. The aging diagnosis of insulation material was possible and the recognition ratio of neural network appeared very high.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.7
• /
• pp.645-649
• /
• 2007

Partial discharge(PD) test for simulated insulation defects of used hydro generator stator winding was conducted to analyze the PD Parameters. Simulated insulation defects are classified by 5 types corona, slot, internal, multi and aging defect. Phase resolved partial discharge, statistical parameter (skewness, kurtosis), PD magnitude as a function of the test voltage(Q-V curve) and PD magnitude change under test voltage for 2 minutes are used as PD parameters. The analysis of PD parameters by 4 types are proved to be useful methods. In particular, PD parameter characteristics of aging defect could help to assess the aging condition of stator winding because aging defect has more weak insulation strength than other insulation defects : PD distribution is wide and flat, PD rises rapidly near $0^{\circ}\;and\;180^{\circ}$ and Q-V curve rises sharply and then gently drops.

• Journal of Korea Multimedia Society
• /
• v.19 no.8
• /
• pp.1445-1452
• /
• 2016

Recently Mobile Software Applications are developed in various languages and stored in App Store. App Users selectively use appropriate apps for the owned hardware. In other words, it depends on the kinds of operating systems of the apps whether to use or not to use the applications in various languages. The apps should be differently implemented according to the kind of the user's device, though they provide the same functions. To solve these problems, it is necessary to define an independent function specification method which is not dependent to a specific system environment. In this paper, the Mobile Application Developing Framework is suggested, which incorporates all of the development process. Standardized models are proposed which can be used in the analysis and design steps. In implementation phase, a technique for cross framework design is suggested so as to implement a platform dependent mobile app.