• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.114-121
• /
• 2013

High efficiency operation is required for motors of vehicle to increase fuel efficiency due to the regulation of exhaust gas. This paper presents a control method of fuel pressure to increase fuel efficiency and a sensorless control method of BLDC motor to get higher efficiency than conventional brushed DC motor. Initial rotor position of BLDC motor is detected from current value that is occurred by test voltage pulse and rotor is accelerated by defined sequence to enter sensorless operation mode. The algorithm to control flow rate of fuel pump uses PI controller that is control motor speed to maintain the target fuel pressure commanded by ECU.

• 자원ㆍ환경경제연구
• /
• 제22권2호
• /
• pp.329-365
• /
• 2013

본 연구의 목적은 2000-2009년 국가별로 환경과 화석에너지의 제약 하에서 경제와 환경의 효율을 측정하고자 함이다. 본 연구는 국가별 소득수준에 따른 OECD국가, 중고소득국가, 저소득국가 등 세 그룹으로 구분하여, 생산가능집합에서 바람직한 산출물인 GDP와 오염물을 동시에 포함한 '환경지향형, 경제지향형, 환경-경제지향형, Two-stage DEA모형' 등의 네 가지 방법을 제시하여 비교한다. OECD국가는 상대적으로 경제효율성이 높으나 환경효율성은 낮았고 비OECD국가는 환경효율성이 높고 경제효율성이 낮았다. 화석에너지와 온실가스의 저감의 여지는 OECD국가가 더 높았다.

• 자원ㆍ환경경제연구
• /
• 제15권2호
• /
• pp.247-267
• /
• 2006

본 논문은 세계 자동차시장의 단일화 현상과 규모의 경제라는 특성을 반영하는 독점적 경쟁시장 모형을 개발하여 환경규제의 효과를 분석하는 것이다. 이를 위하여 Dixit and Stiglitz의 모형과 규모의 경제가 반영된 레온티에프 생산함수를 이용한 독점적 경쟁시장모형을 설정하여 연비규제와 환경세 부과가 시장에 미치는 효과를 비교분석하였다. 분석결과 연비규제는 시장균형가격을 상승시키고, 개별 기업의 판매량은 한계비용증가율과 고정비용증가율의 크기에 의해서 결정되며, 기업의 수는 소비자의 소득에서 완성차에 대한 지출비중증가율과 고정비용증가율의 크기에 의해서 결정되는 것을 알 수 있다. 그리고 시장 전체의 총판매량은 고정비용증가율에 관계없이 지출비중증가율이 한계비용증가율보다 크면 증가한다. 한편 종량세 형태로 환경세가 부과되는 경우 균형가격은 상승하고 각 기업들의 판매량은 감소하는 반면 기업의 수는 변화가 없다. 연비규제와 환경세의 효과를 비교하기 위해서 양 정책수단의 한계비용 증가효과가 같도록 설정할 때 환경세가 연비규제보다 개별 기업과 산업 전체의 판매량 감소에 대한 효과가 더 크다. 그러나 연비규제로 인한 완성차에 대한 지출비중의 변화율이 고정비용의 증가율보다 크면 환경세 부과로 인한 기업의 퇴출효과가 연비규제의 경우보다 크게 된다.

• 한국분무공학회지
• /
• 제16권2호
• /
• pp.97-103
• /
• 2011

The electronically controlled diesel engine was converted to dual fuel engine system. Test engine was set up for investigating the power output, thermal efficiency and emissions. ND 13-mode tests were employed for the engine test cycle. The emission result of dual fuel mode meets Euro-4 (K2006) regulation and the engine performance of dual fuel engine was comparable to the performance of diesel engine. To estimate economical efficiency, test vehicles have been operated on a certain driving route repeatedly. Fuel economy, maximum driving distance per refueling and driveability were examined on the road including free ways. Developed vehicle can be operated over 500 km with dual fuel mode and shows 80% of diesel substitution ratio. Driveability of dual fuel mode is similar with that of diesel mode.

• 한국분무공학회지
• /
• 제21권3호
• /
• pp.137-143
• /
• 2016

The LPG vehicles are being operated by commercial purposes generally such as taxis. Most of taxis have a long-mileage and a harsh driving pattern. These properties may accelerate aging of the three-way catalysts much faster than the passenger vehicles. Because of this background, it was analyzed the test result of fuel efficiency and emissions on the LPG-fueled light duty vehicle. It was selected for a LPG vehicle of ULEV level to measure the fuel efficiency and emissions of the aged three-way catalysts. And the aged three-way catalysts which was driven about 300,000km and 550,000km replaced on the test vehicle in consecutive order. As a result, The aged three-way catalysts generally had no effect on fuel efficiency result, and harmful exhaust emissions had been shown to increase in most of the test mode, even though it satisfied the regulation value on most test modes.

• 한국자동차공학회논문집
• /
• 제13권2호
• /
• pp.44-51
• /
• 2005

According to the increasing concern on the global environment, the $CO_2$ regulation has been discussed including automobile emission regulation. In order to cope with this rapid changing circumstances, the development of an ultra low emission and super fuel economy automobile is essential. Direct injection LPG engine is the one of the possible future engine to maximize the engine efficiency. This experimental study for the development of direct injection LPG engine technology is promoted with two parts; spray characteristics of high pressure swirl injector, and performance characteristics of direct injection LPG engine. Engine characteristics according to the fuel was analyzed in order to establish stratified combustion technology for LPG engine by using the DISI engine. In the engine experiment, control system was manufactured for gasoline and LPG fuel. The engine was modified 2,000 cc GDI engine (fuel supply device, fuel injection device). Through this experiment, engine operating condition, engine speed and spark timing (MBT), fuel injection position, and fuel rate were investigated.

• 한국자동차공학회논문집
• /
• 제23권2호
• /
• pp.178-184
• /
• 2015

According to the regulation on the environment and fuel efficiency is becoming strict, many experiments are conducted to improve efficiency and emission in internal combustion engines. LTC (Low temperature combustion) technology is a promised solution for low emissions but there are a few barriers for the commercial engine. This paper includes optimization that applies LTC method to heavy duty diesel engine. Adequate LTC was applied to low and middle load as adaptability in heavy duty diesel engine, and optimization focused on reduction of fuel consumption was proceeded at high load. Through this research, strategy for practical use of LTC was selected, and fuel consumption has improved on the condition that satisfies the emission regulation at systematic viewpoint.

• 한국분무공학회지
• /
• 제28권4호
• /
• pp.191-197
• /
• 2023

LPG direct injection (LPDi) technology is a method of improving the weaknesses of existing LPG vehicles by directly injection into the combustion chamber. This study was conducted on the comparison of emissions and fuel efficiency performance of the engine and vehicle by applying LPDi technology. The LPDi hybrid engine's maximum output and maximum torque were measured at an equivalent level of less than 1% compared to conventional gasoline fuel. The fuel amount was corrected using the LCU controller, and the THC, CO, and NOx emissions were reduced to 90% in the operating range of the three-way catalyst through air-fuel ratio control. The analysis of THC+NOx and CO emissions in FTP-75 (CVS-75) driving mode satisfied the US LEV III SULEV30 regulation.

• 조명전기설비학회논문지
• /
• 제26권8호
• /
• pp.71-78
• /
• 2012

Recently, it is increased to apply sensorless drive for BLDC (Brushless DC) motor to maximize operating efficiency and fuel efficiency to an electrical component of (H)EV. Especially, Electric vehicle component promotes a fuel efficiency enhancement by the carbon dioxide emissions regulation of a vehicle becoming the principal of the environmental pollution globally, the oil price hike that continued increasingly. We suggested the air compressor which applied BLDC motor for electric vehicle component and compared suggested BLDC motor with the conventional DC motor. The experimental results show that the driving efficiency was increased and was inproved compressive force by suggested BLDC motor.

• 한국생산제조학회지
• /
• 제20권2호
• /
• pp.129-132
• /
• 2011

This paper presents small hydrogen regulator for the mobile fuel cell. Mobile fuel cell is generally classified into open-end type and dead-end type. In the open-end type, flow rate of hydrogen is constantly controlled, while pressure of hydrogen is constantly maintained in the dead-end type. Considering the efficiency and stability of the fuel usage, dead-end type is more suitable with mobile fuel cell. Mobile fuel cell operated by dead-end mode requires hydrogen regulator which controls the hydrogen pressure from 0.1bar to 0.5bar within 3% error. In this paper, small hydrogen regulator (volume of 2.6cc) was fabricated by stainless steel. Regulation characteristics was experimentally evaluated.