• Title/Summary/Keyword: Frequency of resistance

Search Result 1,496, Processing Time 0.038 seconds

Dielectric passivation effects on the electromigration phenomena in Al-1%Si thin film interconnections (A1-1%Si 박막배선에서 엘렉트로마이그레이션 현상에 미치는 절연보호막 효과)

  • 김경수;김진영
    • Journal of the Korean Vacuum Society
    • /
    • v.10 no.1
    • /
    • pp.27-30
    • /
    • 2001
  • Electromigration Phenomena in Al-1%Si thin film interconnections under DC and PDC conditions were investigated. Thin film interconnections with $SiO_2$ and PSG/$SiO_2$ dielectric passivation layer were formed by a standard photolithography process method and test line lengths were 100, 400, 800, 1200, and 1600 $\mu\textrm{m}$. The current density of $1.19\times10^7\textrm{A/cm}^2$ was stressed in Al-1%Si thin film interconnections under DC condition. The current density of $1.19\times10^7\textrm{A/cm}^2$ was also applied under PDC condition at the frequency of 1 Hz with the duty factor of 0.5. The electromigration resistance of PSG/SiO2 dielectric passivation test line was stronger than $SiO_2$ dielectric passivation test line. The lifetime under PDC was 2-4 times longer than DC condition. As the thin film interconnection line increased, the lifetime decreased and saturated over the critical length. Failure patterns by an electromigration were dominated by void-induced electrical open and hillock-induced electrical short.

  • PDF

High power X-band SSPA Design using Gysel Power Combiner (Gysel 전력결합기를 이용한 고출력 X-band SSPA 설계)

  • Lee, Sang-Rok;Lim, Eun-Jae;Rhee, Young-Chul
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.9 no.4
    • /
    • pp.425-432
    • /
    • 2014
  • Necessity of compact X-band solid-state weather radar is required to provide weather data, which generate locally in a lot of Korea's mountainous area, rather than tube-type radar. Solid State Power Amplifier (SSPA) for using Dual-polarization method in weather radar is able to obtain desired high output by combining many low output power devices in parallel. Thus, Power combiner applying to high-output power amplifier has disadvantages such as path loss, ballast resistance problem by high frequency and high power, heat release. Therefore, In this paper we demonstrated the excellence of isolation, which is the result from modified Gysel power combiner. As a result, we designed X-band 250W solid state power amplifier with peak power 54dBm, 25% power efficiency for weather radar.

Differences of EEG and autonomic responses between olfactory stimuli with orange and valeric acid in human (오렌지향과 valeric acid향에 대한 뇌파와 자율신경계반응에 나타난 후각 감성)

  • 백은주;이윤영;이배환;문창현;이수환
    • Proceedings of the Korean Society for Emotion and Sensibility Conference
    • /
    • 1997.11a
    • /
    • pp.75-79
    • /
    • 1997
  • The present study was designed to investigate whether there is a consistint changes in the signals from the central and autonomic nervous systim due to olfactory stimulation. The olfactory stimuli were 0.6% orange and 2.5% valeric acid and the stimuli through the olfactory stimulator soth controlled consistint flow, controlled concentration, and saturated with vapour to prevent drying the nasal mucosa. A room air blunk served as the control stimulus, EEG was recorede from 4channels according to the international 10-20 systim. Additionally, ECG, EOG, heart rate, skin conductance and resputation were recorded comtinuously. The fast Fourier transform analysis of EEG waves was analysed with the power spectra. Averaged power spectra were computed for the following frequency bands ; delta(0-4.5Hz), theta (4.5-7Hz), alphal(7-9.5Hz), alpha2 (9.5-12.5Hz) and beta(12.5-30Hz). Withthe results of the subjective sensibility test for the ordor, the orange was related to pleasant and familiar and the valeric acid was realted to snpleasant and bothersome. There is the difference between orange and valeric acid in alphal at PG2-A2 channel. While the unpleasant stimuli seem to be increased in alphal, alpha2 and beta waves at all channels. Also, the heart rate, galvaric skin resistance seem to be decreased by pleasant stimuli and thd unpleasant stimuli shdwed the opposite. In respiration, respiration rate had been declinig tendency, and input/output ampoitued and duration showed an upward trend by olfactory stimulation with orange, while opposite by valeric acid. In conclusion, the consistent EEG changes and the autonomic responses suggests the possibilities of the subjective signal of human sensibility.

  • PDF

A Study On High Power Factor Sine Pulse Type Power Supply For Atmospheric Pressure Plasma Cleaning System with 3-Phase PFC Boost Converter (3상 PFC 부스트 컨버터를 채용한 상압플라즈마 세정기용 고역률 정형파 펄스 출력형 전원장치에 관한 연구)

  • Han, Hee-Min;Kim, Min-Young;Seo, Kwang-Duk;Kim, Joohn-Sheok
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.14 no.1
    • /
    • pp.72-81
    • /
    • 2009
  • This paper presents quasi-resonant type high power factor ac power supply for atmospheric pressure plasma cleaning system adopting three phase PFC boost converter and it's control method. The presented ac power supply consists of single phase H-bridge inverter, step-up transformer for generating high voltage and three phase PFC boost converter for high power factor on source utility. Unlikely to the traditional LC resonant converter, the propose one has an inductor inside only. A single resonant takes place through the inside inductor and the capacitor from the plasma load modeled into two series capacitor and one resistance. The quasi-resonant can be achieved by cutting the switching signal when the load current decrease to zero. To obtain power control ability, the propose converter controlled by two control schemes. One is the changing output pulse period scheme in the manner of PFM(Pulse Frequency Modulation) control. On the other, to provide more higher power to load, the DC rail voltage is directly controlled by the 3-phase PFC boost converter. The significant merits of the proposed converter are the uniform power providing capability for high quality plasma generation and low reactive power in AC and DC side. The proposed work is verified through digital simulation and experimental implementation.

0.6 mAh All-Solid-State Thin Fim Battery Fabricated on Alumina Substrate (알루미나 기판상에 구현된 0.6mAh급 전고상 박막전지)

  • Park, H.Y.;Nam, S.C.;Lim, Y.C.;Choi, K.G.;Lee, K.C.;Park, G.B.;Cho, S.B.
    • Journal of the Korean Electrochemical Society
    • /
    • v.8 no.4
    • /
    • pp.181-185
    • /
    • 2005
  • Lithium cobalt oxide thin film cathode, having thickness of $2.9{\mu}m$ with area of $4cm^2$, was deposited on platinum patterned alumina substrate by radio frequency magnetron sputtering. Li/Co molar ratio, which is an important factor for battery performance, was measured as a function of argon working pressure and applied R.F. power. Constant current charge and discharge performances were characterized with high rate discharge and cycling behavior. Using AC impedance analysis, internal resistance of the thin film battery was measured and simulated by proposed equivalent circuit model.

Introduction of rolC gene into Petunia hybrida (Petunia hybrida 세포내로의 rolC 유전자의 도입)

  • 정재동;김경민;남윤연;김창길;정원일
    • Korean Journal of Plant Tissue Culture
    • /
    • v.26 no.1
    • /
    • pp.21-26
    • /
    • 1999
  • These experiments were attempted to introduce rolC gene in the Petunia hybrida cv. Titan white by Agrobacterium mediated. The maximum frequency of shoot regeneration was obtained by 60% on MS medium containing 1.0 mg/L BA, 0.1 mg/L NAA, 200 mg/L kanamycin, 500 mg/L carbenicillin, 30 g/L sucrose, and 8 g/L agar. Kanamycin-resistant calli were selected from petunia leaf discs by cocultivation with Agrobacterium suspension cultures on MS medium. The addition of AgNO$_3$ and KMnO$_4$ in the medium increased the shoot regeneration by 31.3% from leaf disc as compared with non-treated leaf disc. Among clones exhibiting kanamycin resistance, only 3 clones were confirmed by southern hybridization analysis.

  • PDF

Fabrication and Characterization of Buried Resistor for RF MCM-C (고주파 MCM-C용 내부저항의 제작 및 특성 평가)

  • Cho, H. M.;Lee, W. S.;Lim, W.;Yoo, C. S.;Kang, N. K.;Park, J. C.
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.7 no.1
    • /
    • pp.1-5
    • /
    • 2000
  • Co-fired resistors for high frequency MCM-C (Multi Chip Module-Cofired) were fabricated and measured their RF properties from DC to 6 GHz. LTCC (Low Temperature Co-fired Ceramics) substrates with 8 layers were used as the substrates. Resisters and electrodes were printed on the 7th layer and connected to the top layer by via holes. Deviation from DC resistance of the resistors was resulted from the resister pastes, resistor size, and via length. From the experimental results, the suitable equivalent circuit model was adopted with resistor, transmission line, capacitor, and inductor. The characteristic impedance $Z_{o}$ of the transmission line from the equivalent circuit can explain the RF behavior of the buried resistor according to the structural variation.

  • PDF

Relative Importance Analysis on Technology Adoption Factors of RFID in SCM (SCM에서 무선인식 기술 수용 요인 별 상대적 중요도 분석)

  • Kim, Tae-Young;Choi, Jun-Seok
    • The Journal of the Korea Contents Association
    • /
    • v.7 no.6
    • /
    • pp.185-194
    • /
    • 2007
  • Today, there is in the world-wide cognition about RFID technology due to established standard, EPC(Electronic Product Code). RFID technology will have wide influence over various fields. Especially, RFID technology's advantages will have positive influence on logistics field. We can solve limited various problems presented in SCM by applying RFIB technology. We can have higher cantrol system, better benefits and actual decision information. Many organizations, however, still have hesitated now because RFID technology has not been validated and RFID technology is in early stage. Other problems are employee resistance against new technology and lack of academic empirical research on assimilation RFID technology for organization. Above reasons I mentioned make me study on analysis on assimilation RFID technology decision in SCM field. This study attempts to analyze the assimilation RFID technology factor from previous researches by using AHP. This outcomes of study will be helpful when we assimilate RFID technology in SCM fields.

Mono-Rifampicin-Resistant Pulmonary Tuberculosis (Rifampicin단독내성 폐결핵)

  • Shim, Tae-Sun;Lee, Ki-Man;Lim, Chae-Man;Lee, Sang-Do;Koh, Youn-Suck;Kim, Woo-Sung;Kim, Dong-Soon;Kim, Won-Dong
    • Tuberculosis and Respiratory Diseases
    • /
    • v.46 no.5
    • /
    • pp.618-627
    • /
    • 1999
  • Background : Rifampicin (RFP) is a key component of the antituberculous short-course chemotherapy. Usually the RFP resistant M.tuberculosis is also resistant to isoniazid (INH), so the RFP resistance is the marker of multi-drug resistant (MDR) tuberculosis. But unusual cases of mono-RFP-resistant tuberculosis have been recently reported with increasing frequency, especially associated with HIV infection in western countries. Therefore, we conducted a retrospective study to investigate the frequency, causes, and the clinical characteristics of mono-RFP-resistant tuberculosis in Korea. Methods : Of the bacteriologically confirmed and susceptibility-proven 699 pulmonary tuberculosis patients (921 isolates) who visited Asan Medical Center from January 1990 to August 1997, eighteen patients with INH-susceptible and RFP-resistant tuberculosis were evaluated. Previous history of tuberculosis, antituberculous drug compliances, associated systemic illness, drug susceptibility patterns, and clinical outcomes were analysed. And rpoB gene sequencing was done in 6 clinical isolates of M. tuberculosis. Results : The mean age of 18 patients was $43{\pm}14$ years, and the sex ratio is 12:6 (M : F). Sixteen (89%) patients had previous history of tuberculosis. None had diagnosed gastrointestinal disorders, and 2 HIV tests that were performed came out negative. Susceptibility tests were done repeatedly in eleven patients, and six (55%) were mono-RFP resistant repeatedly while five (45%) evolved to MDR tuberculosis. Eight (44%) patients were cured, six (33%) failed, three (17%) were lost to follow-up, and the other one is now on treatment. rpoB gene sequencing showed 5 mutations, codon 531 TCG to TIG mutation in 4 isolates and 526 CAC to TAC in 1 isolate. Conclusion : The clinical characteristics of mono-RFP resistant tuberculosis were similar to that of MDR tuberculosis in Korea where the HIV infection rate is lower than western countries. But some patients with mono-RFP-resistant tuberculous could be cured by primary drug regimens including RFP, suggesting that mono-RFP-resistant tuberculous is a different entity from MDR tuberculosis.

  • PDF

SLUMPING TENDENCY AND RHEOLOGICAL PROPERTY OF FLOWABLE COMPOSITES (Flowable 복합레진의 slumping 경향과 유변학적 성질)

  • Lee, In-Bog;Min, Sun-Hong;Kim, Sun-Young;Cho, Byung-Hoon;Back, Seung-Ho
    • Restorative Dentistry and Endodontics
    • /
    • v.34 no.2
    • /
    • pp.130-136
    • /
    • 2009
  • The aim of this study was to develop a method for measuring the slumping resistance of flowable resin composites and to evaluate the efficacy using rheological methodology. Five commercial flowable composites (Aelitefil flow:AF, Filtek flow:FF, DenFil flow:DF, Tetric flow:TF and Revolution:RV) were used. Same volume of composites in a syringe was extruded on a glass slide using a custom-made loading device. The resin composites were allowed to slump for 10 seconds at $25^{\circ}C$ and light cured. The aspect ratio (height/diameter) of cone or dome shaped specimen was measured for estimating the slumping tendency of composites. The complex viscosity of each composite was measured by a dynamic oscillatory shear test as a function of angular frequency using a rheometer. To compare the slumping tendency of composites, one way-ANOVA and Turkey's post hoc test was performed for the aspect ratio at 95% confidence level. Regression analysis was performed to investigate the relationship between the complex viscosity and the aspect ratio. The results were as follows. 1. Slumping tendency based on the aspect ratio varied among the five materials (AF