• Journal of Bio-Environment Control
• /
• v.29 no.1
• /
• pp.9-19
• /
• 2020

Convective heat transfer is the main component of greenhouse energy loss because the energy loss by this mechanism is greater than those of the other two components (radiative and conductive). Previous studies have examined the convective heat transfer coefficients under natural conditions, but they are not applicable to symmetric thermal screens with zero porosity, and such screens are largely produced and used in Korea. However, the properties of these materials have not been reported in the literature, which causes selectivity issues for users. Therefore, in this study, three screens having similar color and zero porosity were selected, and a mathematical procedure based on radiation balance equations was developed to determine their convective heat transfer coefficients. To conduct the experiment, a hollow wooden structure was built and the thermal screen was tacked over this frame; the theoretical model was applied underneath and over the screen. Input parameters included three components: 1) solar and thermal fluxes; 2) temperature of the screen, black cloth, and ambient air; and 3) wind velocity. The convective heat transfer coefficients were determined as functions of the air-screen temperature difference under open-air environmental conditions. It was observed from the outcomes that the heat transfer coefficients decreased with the increase of the air-screen temperature difference provided that the wind velocity was nearly zero.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.5
• /
• pp.54-64
• /
• 2015

The modular construction has several advantages such as high quality of product, safe work condition and short construction duration. The manufacturing planning of modular construction should consider time frame of manufacturing, transport and erection process with limited resources (e.g., modular units, transporter and workers). The manufacturing planning of multi modular construction project manages the modular construction's characteristics and diversity of projects, as a type of modular unit, modular unit quantities, and date for delivery. However, current modular manufacturing planning techniques are weak in dealing with resource interactions and each project requirement in multi modular construction project environments. Inefficient allocation of resources during multi modular construction project may cause delays and cost overruns to construction operation. In this circumstance, this research suggest a manufacturing planning model for schedule optimization of multi project of modular construction, using genetic algorithm as one of the powerful method for schedule optimization with multiple constrained resources. Comparing to the result of the existed schedule of case study, setting optimized scheduling for multi project decrease the total factory producing schedule. By using proposed optimization tool, efficient allocation of resource and saving project time is expected.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.4
• /
• pp.438-444
• /
• 2004

The intelligent robots that will be needed in the near future are human-friendly robots that are able to coexist with humans and support humans effectively. To realize this, robots need to recognize their position and posture in known environment as well as unknown environment. Moreover, it is necessary for their localization to occur naturally. It is desirable for a robot to estimate of his position by solving uncertainty for mobile robot navigation, as one of the best important problems. In this paper, we describe a method for the localization of a mobile robot using image information of a moving object. This method combines the observed position from dead-reckoning sensors and the estimated position from the images captured by a fixed camera to localize a mobile robot. Using the a priori known path of a moving object in the world coordinates and a perspective camera model, we derive the geometric constraint equations which represent the relation between image frame coordinates for a moving object and the estimated robot's position. Since the equations are based or the estimated position, the measurement error may exist all the time. The proposed method utilizes the error between the observed and estimated image coordinates to localize the mobile robot. The Kalman filter scheme is applied for this method. its performance is verified by the computer simulation and the experiment.

• Journal of The Korean Association For Science Education
• /
• v.20 no.2
• /
• pp.274-287
• /
• 2000

This study was performed the analysis of four kinds of common science textbooks based on the 6th curriculum. Particularly, inquiry activity part was analyzed by the three dimension framework which consists of inquiry content dimension, inquiry process dimension and inquiry context dimension. In the analysis of the inquiry content dimension of inquiry activities, the contents revised by 6th curriculum of common science textbook was accomplished through various inquiry activities. The number of inquiry activity in four textbooks was similar as about 16. The For the analysis of inquiry process dimension, 'interpreting data and formulating generalizations' category (39.1%) was most emphasized and the categories of 'observation and measuring'(30.8%), and 'building, testing and revising the theoretical model' (16.5 %), 'seeing a problem and seeking ways to solve it' (13.5%) follow in order. As for the analysis of the inquiry context dimension, the proportion of STS related contents in inquiry activities was only 18%. So, we propose that STS related contents would increase the proportion for the following textbook.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.6
• /
• pp.131-142
• /
• 2016

Since global circumstances have become competitive, entrepreneurship has been regarded as the most important factors in economic revitalization not only in korea but also internationally. According to these changes, public entrepreneurship education has been started from the year of 2004 establishing Entrepreneurial Graduate School as a part of governmental plan. Although entrepreneurship education history is not long enough in korea, but the need for entrepreneurship education in social is now going ahead of the public education systems such as universities and graduate schools. Therefore, this study is conducted for the purpose of drawing the subject frame for systematized integration curriculum of entrepreneurship education through evaluating the importance of the subjects by Analytic Hierarchy Process analysis after being composed of 6 modularity in the Entrepreneurship subjects. This was structured based on studying the current status for entrepreneurship education in domestic universities and graduate schools. The research findings under the condition of Judgement consistency ratio 0.1 are as follows. The most important factors are in order as following; "Entrepreneurial Issues for Fund"(.242), "Entrepreneurship Plan"(.195), "Entrepreneurship & Entrepreneurship mindset"(.161), "Entrepreneurial Issues for Growth & Development"(.160), "Management Skill & Strategy"(.150), and "Special Entrepreneurship"(.093). Then, these findings also represent subfactors as well. The results of this study provide the practical guidelines where the curriculums needed for the entrepreneurship education at graduate schools by suggesting consistency for the systematic and comprehensive curriculum design. It was reflected the survey result from the graduate students taking the entrepreneurship subjects. Therefore, it will contribute the foundation of the present curriculum of Entrepreneurial Graduate School.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.435-445
• /
• 2007

Ship structures are thin-walled structures and lots of cutouts, for example, of inner bottom structure, girder, upper deck hatch, floor and dia-frame etc. In the case where a plate has cutout it experiences reduced buckling and ultimate strength and at the same time the in-plane stress under compressive load produced by hull girder bending will be redistributed. In the present paper, we investigated several kinds of perforated stiffened model from actual ship structure and series of elasto-plastic large deflection analyses were performed to investigate into the influence of perforation on the buckling and ultimate strength of the perforated stiffened plate varying the cutout ratio, web height, thickness and type of cross-section by commercial FEA program(ANSYS). Closed-form formulas for predicting the ultimate strength of the perforated stiffened plate are empirically derived by curve fitting based on the Finite Element Analysis results. These formulas are used to evaluate the ultimate strength, which showed good correlation with FEM results. These results will be useful for evaluating the ultimate strength of the perforated stiffened plate in the preliminary design.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.2
• /
• pp.9-20
• /
• 2014

Steel intermediate moment frames (IMFs) have been generally used as seismic load resisting systems (SLRSs) of a building to provide resistances against strong ground shaking. However, most of low and mid-rise steel buildings in Korea were constructed during pre-seismic code era or before the introduction of well-organized current seismic codes. It has been recognized that the seismic performance of these steel IMFs is still questionable. In order to respond to such a question, this study quantitatively investigates the seismic capacities of steel IMFs. Prototype models are built according to the number of stories, the levels of elastic seismic design base shear and the ductilities of structural components. Also, the other prototype models employing hysteretic energy dissipating devices (HEDDs) are considered. The collapse mechanism and the seismic performance of the prototype models are then described based on the results obtained from nonlinear-static and incremental-dynamic analyses. The seismic performance of the prototype models is assessed from collapse margin ratio (CMR) and collapse probability. From the assessment, the prototype model representing new steel IMFs has enough seismic capacities while, the prototype models representing existing steel IMFs provide higher collapse probabilities. From the analytic results of the prototype models retrofitted with HEDDs, the HEDDs enhance the seismic performance and collapse capacity of the existing steel IMFs. This is due to the energy dissipating capacity of the HEDDs and the redistribution of plastic hinges.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.5
• /
• pp.371-380
• /
• 2017

The risk-targeted seismic design concept was first included in ASCE/SEI 7-10 to address problems related to the uniform-hazard based seismic concept that has been constructed without explicitly considering probabilistic uncertainties in the collapse capacities of structures. However, this concept is not yet reflected to the current Korean building code(KBC) because of insufficient strong earthquake data occurred at the Korean peninsula and little information on the collapse capacities of structures. This study evaluates the risk-targeted seismic performance of steel ordinary concentrically braced frames(OCBFs). To do this, the collapse capacities of prototype steel OCBFs are assessed with various analysis parameters including building locations, building heights and soil conditions. The seismic hazard curves are developed using an empirical spectral shape prediction model that is capable of reflecting the characteristics of earthquake records. The collapse probabilities of the prototype steel OCBFs located at the Korean major cities are then evaluated using the risk integral concept. As a result, analysis parameters considerably influence the collapse probabilities of steel OCBFs. The collapse probabilities of taller steel OCBFs exceed the target seismic risk of 1 percent in 50 years, which the introduction of the height limitation of steel OCBFs into the future KBC should be considered.

• Journal of Korean Society of Forest Science
• /
• v.79 no.3
• /
• pp.330-342
• /
• 1990

One might have a retrospect on the relationship between the forest and human being from the viewpoint of ecological perspective. It is no doubt that most of the fossil humans should have lived on the forest and the latter provided foods and shelters for humans from their beginning stages, Since the so-called agricultural revolution, humans have extensively started to exploit the forest which had beer, their cradle. The industrial revolution has created another situation against the forest in terms of the quality of ecosystem. These two revolutions have set up the so-called civilization which seems to have been based on the sacrificial oblation of the forest. The cradle for human being has been kept exterminating for the shake of "economic development and miracle." This might be a synoptic history of relationships between the forest and human beings in a sense. designates the behavioral aspects of human being against the forest and people consider the forest only as exploitable resource in this context, and the latter means that people live on the forest and strive to adapt the order of forest ecosystem. The resourcism has developed a strategy of colonialism to exploit the forest and provided a winner's position for the human beings against the forest, This idea and behavioral perspective seems to have started the backfire against the exploiter who is the owner of the civilization. However, there are different philosophies and ideas to view the relationship between the forest and human beings. People within the forest who are mostly considered as "primitives" still keep their idea of the ontology of the forest. There is a theoretical assumption of the "socionatural system" to look into the ecosystem. The forest could be viewed in the above frame of analysis. There are five variables : environment, resource, technology, organization, and ideology. Ideological aspect of the forest can be explained in the context of belief systems. Forest has a meaning of religion and rituals and people within the forest should admire it in anyway of religious reasons. This aspect of the forest cannot be separated from the environmental aspect of the forest. People within the forest acknowledge and practice the above idea. People outside the forest have lost the idea, however, at the cost of acquiring the civilization. They have expelled themselves from the forest and divided the socionatural system of the forest by way of colonialism. The efforts like agroforestry and social forestry would be strategies for recovering the idea of ontology of the forest as well as the sense of community including the forest and human being. People within the forest will be a prospective model for the future socionatural system of the forest for the people outside the forest. At this point, an ecological anthropologist can work with the forest specialists.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.2010-2024
• /
• 1998

In video coding, it is important to improve the average picture quality as well as to maintain cosistent picture quality between consecutive pictures. In this paper, we propose a distortion-rate estimation method for MPEG-2 video and a forward rate control method, using the proposed estimation result, to be able to obtain the improved and consistent picture quality of CBR (Constant Bit Rate) encoded MPEG-2 video. The proposed distortion-rate estimation enable us to predict the distortion and the bits generated from an encoded picture at a given quantization step size and vice versa. The most attactive features of proposed distortion-rate estimation are its accuracy and low computational complexity enough to be applied to the practical video coding. In addition, the proposed rate control first determined a quantization parameter per frame by following procedure: distortion-rate estimation, target bit allocation, distortion constraint and VBV(Video Buffer Verification) constraint. And then this quantization parameter is applied to the encoding so that improved and consisten picture quality can be obtained. Furthermore the proposed rate control method can solve the error propagation problem caused by scene change or anchor picture degradation by using the B-picture skipping and the guarantee of the minimum bit allocation for the anchor picture. Experimental results, comparing the proposed forward rate control method with TM5 method, show that the proposed method makes more improed and consistent picture quality than TM5.