• 한국중재학회지:중재연구
• /
• 제23권3호
• /
• pp.1-23
• /
• 2013

Form requirements particularly for arbitration clauses are widely perceived as an obstacle for efficiently resolving disputes on an international level. The paper discusses the recent suggestion that the freedom of form principle under Art. 11 CISG extended to arbitration, forum selection, or choice of law clauses in international sales contracts and thus superseded any and all formal requirements in this regard. After analysing national and international form requirements with regard to said clauses, the authors elaborate that while dispute clauses are indeed encompassed by the CISG's scope of application, freedom of form under the CISG was neither intended to nor should it apply to dispute clauses. This result is further confirmed by the interplay of the CISG with other international conventions, first and foremost the 1958 New York Convention, as well as a careful analysis of the so called most-favourable-law-approach.

• 디자인학연구
• /
• 제4권1호
• /
• pp.31-37
• /
• 1991

Process of thinking on the form in product design includes the process in which unclear requirements are transformed into defined concepts, and the process in which the design as a form conforming to the concepts in conc1uded.(The former is called fconceptualizationJ which deals with abstract matters, and the latter "manipulation of the formJ which deals with more embodied matters) In conceptualization process the operation which transform the diverse requirements in the initial phase of de\ulcornersign to related linguistic expressions or to an image that directly suggests the form is executed. In the process of manipulation of the form the transformation to design as the description of relationships between the formal elements of the design solution resulted from the transformed requirements. It is the job of selecting the most suitable formal elements, balancing the relationships between them, out 01 the possibilities that reside in the individual attributes of formal elements, and finally leading to the design as the end solution. This writing focuses down to the wilfulness and ambiguity of design, and the diversity of design solution after the requirements, formal elements, and the process of relating the formal attributes to each other is built up the two phases.ases.

• 대한조선학회지
• /
• 제24권2호
• /
• pp.20-28
• /
• 1987

In general, preliminary hull form design is performed by changing a parent hull form using a computer to satisfy given requirements, e.g., principal dimensions, displacement, $L_{CB}$, and etc. Principal dimensions, $C_b,\;L_{CB}$ and midship sections are the only parameters to be modified in the traditional hull form variation methods available for preliminary design. In this paper, a method is presented in which local cross sections as well as principal dimensions and midship sections are modified according to design requirements. The method gives hydrostatic curves of modified hull form simultaneously. An optimization technique to satisfy the constraints of hydrostatic characteristics such as maximizing KM as a design requirement is also considered.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.112-113
• /
• 2018

As the building becomes more sophisticated, indoors and outdoors exterior decoration of construction has been increased. However, it is very difficult to produce an FDM(Free-form Decorative Mold) that meets the requirements of quality, durability, and ease of installation, resulting in a high cost. Therefore, the objective of this study is basic research for economical production of FDM production technology while satisfying the above requirements. For this study, the authors analyze the details of the shape and requirements of the FDM, and the production details and processes that reflect the characteristics. The results of this study can utilize to develop algorithms for production and management of academically efficient FDM and can utilize to secure FDM production technology at commercial level.

• 품질경영학회지
• /
• 제38권2호
• /
• pp.276-283
• /
• 2010

ISO 9000 family of standards are consisted of four international standards for implementing and operating effective quality management systems. They are interrelated and together form a coherent set of quality management system standards. ISO 9000, one of the standards, contains quality management principles, which is asserted to form the basis of other standards within the family. ISO 9001 is another standard within the family and contains requirements for quality management systems. This paper shows how the quality management principles of ISO 9000 are related with the requirements of ISO 9001.

• 항공우주시스템공학회지
• /
• 제11권2호
• /
• pp.1-8
• /
• 2017

국방획득 프로세스에서 운용자인 소요군의 명확한 요구사항을 전달하는 것은 성공적인 무기체계 획득을 위한 핵심적인 활동이다. 국방 분야에서는 소요군의 요구사항 도출 및 전달을 위해 운용요구서를 작성하고 있다. 본 연구에서는 미 국방 운용요구서를 참고하여 최근 작성된 국내 운용요구서의 양식 및 작성내용을 비교 분석하였다. 연구결과 국내의 운용요구서 양식은 일부 보완이 필요하며, 내용적 측면에서는 핵심 항목인 요구사항 파라미터에 대한 작성이 미흡하다고 판단되었다. 이러한 문제점을 보완하기 위해 본연의 목적에 적합한 운용요구서 양식을 제시하였으며, 운용성능-체계성능-핵심성능 파라미터에 대한 구체적인 정의와 설명 및 사례를 제시하여 군의 요구사항을 명확하게 전달하는 방안을 제시하였다.

• 국제강구조저널
• /
• 제18권5호
• /
• pp.1654-1665
• /
• 2018

In an irregular prism tensegrity, the number of force equilibrium equations is less than the number of unknown parameters of nodal coordinates and member force ratios. As a result, the form-finding process normally becomes nonlinear with additional conditions or needs to be carried out with the use of iterative procedures. For cases of irregular prism tensegrity which involves large number of members, it was found that previously proposed methods of form-finding are not practical. Moreover, there is a need for a form-finding approach which is able to cater to different requirements on final configuration. In this paper, the length relation condition is introduced to be used in combination with the force equilibrium equation. With the combined use of length relation and equilibrium conditions, a linear form-finding approach for irregular prism tensegrity was successfully formulated and developed. An easy-to-use interactive form-finding tool has been developed which can be used for form-finding of irregular prism tensegrities with large number of elements as well as under diverse specific requirements on their configurations.

• 대한인간공학회지
• /
• 제12권2호
• /
• pp.29-43
• /
• 1993

This paper presents a conceptual approach to convert customer requirements expressed in ordinary language into a form of qualitative and quantitative functions for developing new products. This approach attempts to combine the concepts of the value engineering and the Kansei engineering. It emphasizes that customer require- ments should be interpreted and reflected on the design of new product. Specific are discussed for extracting subjective requirements and transforming them into qualitative and quantitative functions for product design. This approach is expected to provide the product designer with a systematic efficient tool for incorporating subjective requirements into a product design.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.12-13
• /
• 2020

Free-form buildings usually have large curved shapes on the outside. In order to construct this curved shape, the exterior of the building must be divided into easy-to-manufacture shapes, and the segmented panel is called the FCP(Free-form Concrete Panel). These FCPs have different shapes and cannot reuse molds. To solve these problems, the researchers developed FCP manufacturing equipment to manufacture a mould of FCP. However, the developed equipment alone cannot completely manufacture FCP's mould. This is because there is no mould to implement side of FCP. Therefore, it is necessary to develop a side form of FCP that can be applied to FCP manufacturing equipment. To this end, this study analyzes the basic requirements that side mould should have before developing side mould.

• 한국건축시공학회지
• /
• 제4권4호
• /
• pp.103-108
• /
• 2004

In order for concrete as a basic material constituting reinforced concrete structure to meet the required performance, it is necessary to satisfy various requirements in concrete construction. Among them, form work has significant effects not only on the process of molding fresh concrete but also on the quality and performance of hardened concrete. Recently, the decrease and aging of form workers is becoming a great problem in the construction industry and, as a result, it is required to rationalize form works and reduce labor costs for employing form workers. Because form construction methods decide the type of form according to required performance, it is necessary to develop various form construction methods and examine their performance. Thus the present study purposed to expand the scope of application of form construction methods and, for this purpose, investigated the basic characteristics of rib- lath form and presented a system form construction method.