• Journal of the Korean Wood Science and Technology
• /
• v.51 no.5
• /
• pp.419-430
• /
• 2023

In this study, the floor impact sound insulation performance of Korean domestic Cross-Laminated Timber (CLT) slabs was evaluated according to their joint types, species and thicknesses in laboratory experiments. The sound insulation performance of the CLT has not been investigated before, thus, this study was conducted to quantify basic data on floor impact sound insulation performance of CLT slabs. 5-ply and 150 mm thick CLT panels made of 2 species, Larix kaempferi and Pinus densiflora, were used for the study. The CLT panels were assembled by 3 types of inter-panel joints to form floor slabs: spline, butt and half-lap. And the 150 mm thick Larix CLT slabs were stacked to the thicknesses of 300 mm and 450 mm. The heavy-weight floor impact sound insulation performance of the 150 mm CLT slabs were evaluated to be 70 dB for the Larix slabs and 71.6 dB for the Pinus slabs, and the light-weight floor impact sound insulation performance, 78.3 dB and 79.6 dB, respectively. No significant difference in the sound insulation performance was found between the slabs of the 2 species or among the 3 types of joints. The reduction of 1 dB in the heavy-weight floor impact sound and 1.6 dB in the light-weight floor impact sound per 30 mm increase in thickness were confirmed through the experiments. This study can be viewed as the basic research for the evaluation of floor impact sound insulation performance of CLT.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.56-56
• /
• 2020

봄철 새순을 식용하는 두릅나무는 기능성 건강식품으로 각광을 받고 있어, 생리활성이 뛰어난 고품질의 두릅나무 신품종을 개발하여 고부가가치 창출 및 상업적 용도로 활용하고자 본 연구를 수행하였다. 두릅나무 선발개체, 상업적으로 판매되고 있는 지역종 및 일본품종 등 총 46개체의 새순 특성을 조사하고, 이들 중 새순 특성이 우수한 25개체의 항산화, 항노화, 미백저해 활성 및 항염증 활성 등 생리활성 분석을 실시하였다. 새순 특성을 조사한 결과, 「임산물표준규격」에 따른 등급 구분에서 46개 수집 개체 중 13개 개체가 '특'품에, 22개체는 '상'품에 해당하였다. 특히, 원주에서 선발한 개체들은 새순 굵기가 2.2±0.2cm, 새순 1개의 무게가 49.5±7.6g으로 지역종 및 일본 품종과 비교했을 때 새순 특성이 2~3배 우수한 것으로 나타났다. 생리활성 분석결과 항노화 활성, 미백 저해 활성 및 항염증 활성은 선발개체가 일본품종과 지역종에 비해 우수한 반면 항산화 활성은 낮게 나타났다. 생리 활성이 우수한 선발개체의 일반성분 함량은 일본품종과 지역종에 비해 낮았으나, Ca 등의 무기성분 함량은 더 높았다.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.57-57
• /
• 2020

다래(Actinidia arguta (Siebold & Zucc.) Planch. ex Miq.)의 재배에서 현재 많이 이용되고 있는 평덕형은 기존의 T덕형에 비해 가지의 배치가 자유롭고 수확량이 많은 장점이 있다. 평덕형을 활용한 다래 재배에서 결과모지의 전정 길이에 대한 연구는 미흡한 실정이며, T덕형과 마찬가지로 15cm 길이의 단초전정이 권장되어 있다. 본 연구에서는 평덕형에서 품종별로 수확량을 증대하면서 과실 품질을 향상시킬 수 있는 적정한 결과모지 길이를 결정하고자 하였다. 이를 위해 과실 특성이 다른 '오텀센스'와 '대보' 품종을 이용하여 결과모지가 30, 50, 100, 150 및 200cm 길이가 되도록 전정하고, 수확기인 9월에 수확량 및 열매 특성을 조사하였다. 평덕형의 경우 품종과 결과모지 전정길이에 따라서 가지수, 결과지의 수, 총 착과 수, 열매무게 및 총 수확량에서 유의적인 차이를 보였다. 두 품종 모두 150cm로 결과모지를 전정하였을 때 결과모지당 착과 수가 각각 129±71개 및 27±8개로 가장 좋았으며, 총 수확량 역시 각각 1,697.0±990.4g 및 849.0±243.2g으로 가장 좋았다. '오텀센스'와 '대보' 품종은 평덕재배시 결과모지를 150cm로 전정하는 것이 생산량 증대 및 품질 특성이 우수한 것으로 나타났다.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.58-58
• /
• 2020

다양한 품종이 개발되어 재배되고 있는 다래(Actinidia arguta (Siebold & Zucc.) Planch. ex Miq.)의 재배유형이 T덕형과 평덕형으로 나누어지고, 덕 형태 및 품종에 따라 다래의 생육 양상에 차이가 있음에도 불구하고 결과모지 길이를 15cm 길이의 단일한 형태로 전정해 왔다. 본 연구에서는 T덕형을 활용한 다래 재배에서 품종별로 수확량을 증대하면서 과실 품질을 향상시킬 수 있는 적정한 결과모지 길이를 결정하고자 하였다. 이를 위해 국립산림과학원에서 개발한 '새한', '대성' '칠보' 및 '오텀센스' 등 4품종을 대상으로 하여 결과모지 길이가 15, 30 및 50cm가 되도록 전정하였다. 동일한 방법으로 재배한 후 수확기인 9월에 수확량 및 열매 특성을 조사하였다. 그 결과 품종과 가지수, 결과지의 수와 미결실지 수, 열매 무게, 총 수확량 에서 유의한 차이가 있었고, 전정 길이에 따라서는 총 착과 수, 열매 무게 및 총 수확량에서 차이가 있었다. 모든 품종에서 결과모지 길이가 길어질수록 총 수확량은 증가하였으며, 총 수확량은 품종에 따라 2~7배까지 증가하는 경향을 보였다. 결과모지 전정은 '새한', '대성' 및 '오텀센스'는 50cm 전정에서 칠보는 30cm 전정에서 생산량 및 품질특성이 우수하였다.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.5
• /
• pp.615-623
• /
• 2014

Increases of public attention on healthy environment lead to the regulation of indoor air quality such as Clean Healthy House Construction Standard. This standard covers emission of total volatile organic compounds (TVOCs) (e.g., formaldehyde, benzene, and toluene), ventilation, and use of environmentally-friendly products or functional products. Moisture absorption and desorption abilities are a recommended functionality for improving indoor air quality. In this study, moisture absorption and desorption capacities of carbonized board from wood-based panels and other materials were determined by using UNT-HEAT-01 according to ISO 24358:2008. Pine had higher moisture absorption and desorption capacities ($49.0g/m^2$ and $35.3g/m^2$, respectively) than hinoki cypress, cement board, gypsum board, oriented strand board, and medium density fiberboard (MDF). The moisture absorption and desorption capacities differed considerably according to the wood species. After carbonization process at $400^{\circ}C$, the absorption and desorption ability of MDF increased to 38% and 60%, respectively. However, moisture absorption and desorption capacities decreased with increasing carbonization temperature, but they were still higher than original MDF. Therefore, it is suggested that carbonization below $600^{\circ}C$ can improve moisture absorption/desorption capacities.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.2
• /
• pp.73-85
• /
• 2016

Systematic and efficient forestry management is required because of the long-term low profitability of timber production and forest products. In this situation, non-timber forest products can be the solution to secure stable sources of income for workers in the forestry field. However, the existing studies for non-timber forest products focus on effective production and economic analysis and provide plans for increasing the income and improving the marketing system. Therefore, this research intends to analyze the spatial distribution as well as quantitative concentration of non-timber forest production. To achieve this goal, this study examined the regional concentration and dispersion of non-timber forest production in 2001, 2007, and 2014 using the coefficient of localization(CL) and location quotient(LQ) and investigated the change in spatial distribution using spatial statistics. The production of chestnuts generally showed a concentrated pattern in 2014 based on the outputs of the CL and LQ, but the result of spatial autocorrelation indicated a decrease in the spatial concentration. In addition, astringent persimmon showed more concentration from the output of CL than oak mushroom, but Moran's I suggests the opposite. Therefore, it is necessary to examine the spatial distribution to understand and improve the marketing system and intensify the production of forest products.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.373-379
• /
• 2001

The objectives of this study were to assess implementation on tariff quotas and tariff cuts committed in the WTO as result of Uruguay Round(UR) negotiations and to examine impacts of reductions in agricultural protection agreed in the UR on major non-timber forest products markets. The implementation of WTO Agreement on Agriculture was analysed based on the relevant data and statistics. The impacts of implementation on tariff cuts and tariff quotas on non-timber forest products markets were estimated by using supply and demand elasticities from previous studies and data on production, consumption and trade after UR. The quantities of Chestnut, Pine nut and Jujube imported by the system of tariff quota did not exceed the committed quotas over the five years from 1995 to 1999. The current level of applied rates on imports of non-timber products is much lower than that of bound rates, which will be maintained until the year 2004. It is estimated that increase in imports after UR reduced prices and that reduction in prices led to decrease in expenditure and to increase in consumer surplus. It is estimated, however, that production level significantly decreased due to rise in imports and that the negative effects on production exceeded positive effects on consumption. Exports of most non-timber forest products decreased after UR even though non-timber forest products could gain access to the export markets at the lower tariffs as a result of UR.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.81-91
• /
• 2011

Current fuel ethanol research and development deals with process engineering trends for improving biotechnological production of ethanol. Recently, a large amount of studies regarding the utilization of lignocellulosic biomass as a good feedstock for producing fuel ethanol is being carried out worldwide. The plant biomass is mainly composed of cellulose, hemicellulose and lignin. The main challenge in the conversion of biomass into ethanol is the complex, rigid and harsh structures which require efficient process and cost effective to break down. The isolation of microorganisms is one of the means for obtaining enzymes with properties suitable for industrial applications. For these reasons, crude cultures containing cellulosic biomass degrading microorganisms were isolated from rice field soil, cow farm soil and rotten rice straw from cow farm. Carboxymethyl cellulose (CMC), xylan and Avicel (microcrystalline cellulose) degradation zone of clearance on agar platefrom rice field soil resulted approximately at 25 mm, 24 mm and 22 mm respectively. As for cow farm soil, CMC, xylan and Avicel degradation clearancezone on agar plate resulted around at 24mm, 23mm and 21 mm respectively. Rotten rice straw from cow farm also resulted for CMC, xylan and Avicel degradation zone almost at 24 mm, 23 mm and 22 mm respectively. The objective of this study is to isolatebiomass degrading microbial strains having good efficiency in cellulose hydrolysis and observed the effects of different substrates (CMC, xylan and Avicel) on the production of cellulase enzymes (endo-glucanase, exo-glucanase, cellobiase, xylanase and avicelase) for producing low cost biofuel from cellulosic materials.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.9-18
• /
• 2014

London Convention on the prevention of marine pollution by dumping of wastes and other matter prohibits the deliberate disposal of paper mill sludges at sea. In order to explore the alternative plan on the prohibition of sludge disposal at sea, the biodegradable seedling pot was developed by mixing the sludge with old newspaper (ONP) in appropriate mixing ratios. The C/N ratio of the mixed sludge was below 20, leading to rapid deterioration of the organic matters composing the seedling pot. The increased ONP contents in the seedling pot resulted in the increase of pot thickness and thereafter in the decrease of pot density. Cellulose fibers in ONP promoted water absorption of the pot but AKD addition helped the seedling pot to repel water during raising seedling. Breaking length and burst strength of the seedling pot were improved by addition of wet strength additives but air permeability was a little diminished. Biodegradable rate of the seedling pot in a soil was accelerated by the attack of soil microbes at the beginning, and finally the pot was completely degraded in 150 days in a soil.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.309-317
• /
• 2014

Harvested wood products (HWP) are known as products from the tree such as sawn wood, plywood, particle board, structural lumber, wooden interior material, wooden furniture, and paper products. Because carbon is locked up in the HWP until eventual end-use of HWP, HWP played a role as the carbon storage which has the effect of stabilizing the concentration of carbon dioxide in the atmosphere. For these reasons, the suggestion that it must admit the carbon storage effect of HWP has been constantly raised. In 2011, the 17th session of the Conference of the Parties (COP) to the United Nations Framework Convention on Climate Change (UNFCCC) which was held in Durban, South Africa, assigned "Production Approach" which targets only the HWP producted by using round wood of domestic forestry as a official method for carbon accounting. Therefore, it is necessary that each country has to determine the half-life of wood in order to correspond to the discussions and negotiations between countries in the future and to develop an inventory of product-specific domestic wood. In this study, some countries' examples of the methods and conditions for determining half-life of HWP were investigated, and it was tried to derive the factor and methodology to determine half-life span of domestic HWP appropriately.