• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2010년도 춘계학술대회
• /
• pp.283-290
• /
• 2010

This paper suggest that the derivation of good and practical ideas is important for the successful use of Kano model. Wish List, Bug List and Forced Connection Method as well as Brainstorming were applied to PMP(Portable Multimedia Player) in order to derive customer attributes. Wish List and Bug List are variants of Brainstorming, which are contrary to each other. Forced Connection Method is designed to bring about bisociation which is a typical characteristic of creative thinking.

• 한국의류학회지
• /
• 제37권2호
• /
• pp.213-223
• /
• 2013

This study presents the process of fashion item development with velvet through creative thinking methods. Creativity is one of the most important requirements for a successful job career and education enhancing creative thinking is needed in the area of fabrication, product design, and marketing strategy development. Velvet was selected as a research stimulus because it is a luxurious fabric with various differential properties such as a soft touch, unique luster, excellent drapability, and fine physical properties. The research methodology included creative thinking methods review, the selection of the tools, idea sourcing and listing, sequential idea evaluation and sample product making. After review of the various creative thinking methods, a combination method and forced connection method were employed as research tools to confirm the usefulness of creative thinking training because of their independence of use and application simplicity. A total of 12 university students participated as subjects in this research. After some training, each student derived ten ideas for velvet products that utilized a combination method and forced connection method. A total of 120 ideas were evaluated for novelty, technical possibility, practicality, and marketability; subsequently, 24 ideas were adopted and developed as sample products. The effectiveness of creativity education in fabrication and product design classes was verified through the whole process of product planning.

• 한국콘텐츠학회논문지
• /
• 제18권4호
• /
• pp.38-47
• /
• 2018

새로운 콘텐츠를 기획하는 방법에 대한 논의가 활발해지는 가운데, 여전히 새로운 콘텐츠를 기획하는 구체적인 방법론에 대한 미디어 학계의 논의는 활발하지 않다. 본 연구에서는 새로운 콘텐츠를 기획하는 방법으로서 강제연결법과 의미론의 유용성을 자기문화기술지 방식을 통해 검토하며, 인문학이 콘텐츠 생산 현장과 어떻게 접합되는 지 검토해보았다. 연구자가 2007년 방송사 재직 당시 기획했던 시사 인터뷰 프로그램인 <단박인터뷰> 기획 과정을 자기 문화기술지 방식으로 기술하고, 그 경험을 사회문화적 의미와 연결시키고자 했다. 시사 프로그램 제작 경험이 없었던 연구자는 강제연결법을 사용하여 낯선 단어의 의미를 결합하여 '단박인터뷰'를 기획했고, '곧바로', '지체 없이', '현장에서', '솔직하게'를 뜻하는 '단박'이라는 의미를 충실하게 나열함으로써 제작방식과 출연자를 결정하게 되었다. 연구자의 이와 같은 기획방법은 단어의 의미를 기술한 뒤 의미에 맞게 제작 메커니즘을 모색한, 이른 바 의미론에 의한 콘텐츠 기획방식이라 할 수 있다. 의미론에 의한 기획은 단기간에 적은 인원으로 새로운 프로그램을 기획해야 하는 한계상황이 만들어낸 기획 법으로, 콘텐츠 기획에서 인문학적 접근이 유효하다는 것을 보여주는 증거라 하겠다.

• 품질경영학회지
• /
• 제39권2호
• /
• pp.305-312
• /
• 2011

Kano model has been widely used to identify and classify customer attributes of a product or a service. The first step of Kano model application is the derivation of customer attributes, and brainstorming has been used conventionally for the purpose. A typical advantage of brainstorming is to get many ideas in a relatively short period, but the practicability of the derived ideas are known to be not so good. The derivation of good and practical ideas is important for the successful use of Kano model. Wish list, bug list and forced connection method as well as brainstorming were applied to PMP(Portable Multimedia Player) in order to derive customer attributes. To compare the idea generation methods, the derived attributes are classified and compared using Kano model.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 추계학술대회
• /
• pp.491-503
• /
• 2008

As customer needs become diversified, there are many efforts to develop creative ideas on the products to satisfy the customer requirement. Also it is very important to classify the customer requirement to the product's quality. According to the previous study, the idea of the products by collecting opinions and brainstorming is mainly studied in new product development. To create the attractive quality for the product, Kano model has commonly been used. However, the brainstorming in the stage of create ideas has the problem of lower linkage between purpose and idea and lower quality of new idea. Therefore, the paper suggests a way to invent more creative ideas by comparing forced connection method to the brainstorming that is applied to the Kano model.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.871-876
• /
• 2001

One-touch fittings are important components that can make a quick and tight connection between pneumatic pipe systems. In this study, the stress analyses with various working pressures on these one-touch fittings are carried out using finite element method. Material properties, to use the stress analyses, are measured by the universal tester and digital Vickers hardness tester. The stress analyses on the circular shell spring forced by various pressures(100, 150, 200, 250kpa) and on the main body due to the fluid-structural interaction are investigated. Results show that the stresses of one-touch fitting are concentrated to supported part of main body and the soundness of a circular shell spring with maximum pressure 250kpa was confirmed.

• 대한전기학회논문지
• /
• 제33권9호
• /
• pp.347-354
• /
• 1984

This paper presents a method of improving the power factor and , the waveform of A.C line currents and the output waveforms of AC to DC fully bridge converter systems which is achieved by connecting CON I.II and CON III.IV in series and parallel. The basic principle of the CON I.II.III.IV's operation is simple and feasibility of thease converter is proved by experiments. CON I and CON III are constructed of natural commutation, CON II and CON IV are constructed of forced commutation. The experimental results show that the power factor and waveform of the source currents and the output waveforms are improved by the method of connecting converter in series and parallel and driving it in I, II, III, IV quadrant.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.194-200
• /
• 2000

Researches on the FRF-based substructuring method have been mainly focused on vibratory response analysis. Present study is concerned about the application of the method to the dynamic stress analysis of a compressor mounting bracket in a passenger car. This is performed by using reaction forces that can be obtained by the FRF-based substructuring method. The air-conditioner system, composed of a compressor, a bracket and a test jig, is analyzed by using the FRF-based substructuring method. The experimental and numerical FRFs are combined to calculate the system responses and reaction forces at the connection point. The dynamic reaction forces plugged into the bracket FE model to compute the compute the stresses of the bracket. Dynamic stresses by the present method are compared with those from FE model. The comparison shows possibility of practical usage of the method for the real problem.

• KIEAE Journal
• /
• 제4권3호
• /
• pp.87-94
• /
• 2004

The purpose of this study is to improve thermal environment of telecommunication equipment rooms that hold TDX-10, TDX-100, 5ESS-2000, PCM of the latest telecommunication equipment. Analysis program is used the commercial CFD code, Star-CD and DOE-2.1E. The result has been compared by the energy consumption and the temperature contour at the 1 m height of room for each case. Different methods such as the relocation of the existing air-conditioner, the inflow of the ambient air into room, the installation of the forced fan and the cooling system equipment of the duct-connection type have been used to test for improvement of thermal environment. The analysis shows that most efficient method is the inflow of the ambient air into room but auxiliary equipment should be needed to prevent the local thermal spot.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1786-1793
• /
• 2004

A fundamental function of court sport shoes was considered as the protection of human feet from unexpected injuries. But, recently its role for improving the playing competency has been regarded as of more importance. In connection of this situation, intensive efforts are world-widely forced on the development of court sport shoes proving the excellent playing competency by taking kinesiology and biomechanics into consideration. However, the success of this goal depends definitely on the shoes design based upon the reliable evaluation of shoes functional parts. This paper addresses the application of finite element method to the evaluation of landing impact force of court sport shoes. In order to reflect the coupling effect between leg and shoes accurately and effectively, we construct a fully coupled shoes-leg FEM model which does not rely on the independent experimental data any more. Through the numerical experiments, we assess the reliability of the coupled FEM model by comparing with the experimental results and investigate the landing impact characteristics of court sport shoes.