• 제목/요약/키워드: FoM

검색결과 274건 처리시간 0.025초

Thixoforging을 이용한 중공형 금속복합재료 부품의 성형공정에 있어서 결함예측 (Defect Prediction in Part Fabrication Process of Metal Matrix Composites by Thixoforging Process)

  • 윤성원;김병민;강충길
    • 소성∙가공
    • /
    • 제12권2호
    • /
    • pp.102-109
    • /
    • 2003
  • In the manufacturing process of metal matrix composites parts, thixoforging is one of the most effective forming processes. The major purpose of the current study is to provide the proper conditions such as the die shape, the forging velocity, the forging time, the forging pressure and reinforcement injection velocity and pressure on various defects in thixoforged cylinder liner, filling tests were performed by MAGMA S/W. In order to evaluate the effectiveness of the calculated conditions which is given by computer aided engineering, A357, A380 and SiC$_{p}$/A380 cylind~5$mu extrm{m}$r liner were fabricated under the calculated conditions. SiC$_{p}$/A380 composite billets were fabricated by both the mechanical stirring and electrical magnetic stirring process. Incase fo SiC$_{p}$/A380 composite cylinder liner, reinforcement distribution and effect of reinforcement(SiC$_{p}$) content(10~20 vol. %)and size(5.5~14${\mu}{\textrm}{m}$) on the mechanical properties were investigatedstigated.

PVA에 고정화된 질화세균에 의한 암모니아성 질소제거 (Removal of #NH_3-N$ by using Immobilized Nitrifier Consortium in Polyvinyl Alcohol)

  • 서근학;김용하;조진구;김병진;서재관;박은주;김성구
    • 한국환경과학회지
    • /
    • 제8권4호
    • /
    • pp.479-483
    • /
    • 1999
  • Nitrifier consortium immobilized in polyvinyl alcohol was used for the removal of ammonia nitrogen from synthetic aquaculture water in the airlift bioreactor. At the aeration rate fo 0.15 vvm and bead packing volume fraction of 20%, airlift bioreactor was operated effectively for a removal of ammonia nitrogen and for a stability of operation. Ammonia nitrogen removal rate by airlift bioreactor was continuously increased with decreasing hydraulic residence time. At the HRT(hydraulic residence time) of 0.3 hour, ammonia nitrogen removal rate was 84.3 g/$m^3$.d and the highest ammonia nitrogen removal rate was 130.8 g/$m^3$.d when HRT was 0.1 hour.

  • PDF

Ionospheric F2-layer Perturbations Observed After the M8.8 Chile Earthquake on February 27, 2010, at Long Distance from the Epicenter

  • Hegai, Valery V.;Kim, Vitaly P.;Legen'ka, Anna D.
    • Journal of Astronomy and Space Sciences
    • /
    • 제34권1호
    • /
    • pp.1-5
    • /
    • 2017
  • The F2-layer critical frequency (foF2) data from several ionosondes are employed to study the long-distance effect of the M8.8 Chile Earthquake of February 27, 2010, on the F2 layer. Significant perturbations of the peak F2-layer electron density have been observed following the earthquake at two South African stations, Hermanus and Madimbo, which are located at great circle distances of ~8,000 and ~10,000 km from the earthquake epicenter, respectively. Simplified estimates demonstrate that the observed ionospheric perturbations can be caused by a long-period acoustic gravity wave produced in the F-region by the earthquake.

일산충적평야의 홀로세 퇴적환경변화와 해면변동 (The Holocene Depositonal Environment and Sea-Level Change at Ilsan Area)

  • 황상일
    • 대한지리학회지
    • /
    • 제33권2호
    • /
    • pp.143-163
    • /
    • 1998
  • In order to clarify the depositional environment and sea-level change at Ilsan area including Gawaji and Saemal valley plains, which is located at the right side in downstream of the Han River, boring data, radiocabon dating and diatom analysis were comprehensively investigated. As a result, the palaeogeographies fo this area altered by the transgressions and regressions after 7,000 y. BP could be restored. The high tide sea-level(mean high water level of spring tide) was arrived ca. 7,000y. BP at the valley plain and risen to ca. 5.5m at ca. 5000y. BP. Since then, the sea-level was kept up the same level to ca. 3,200 BP. The descended sea-level to ca. 2,300 BP was risen up to ca. 5.8m in ca. 1,800 y. BP. It is presumed that such a sea-level change as well as the different sediments in quantity supplied from the river basin of the valley plain could be effected to change diversely the depositional environment of the study area and eventually to the prehistoric human life.

  • PDF

Oxidative Potential of Some Endophytic Fungi Using 1-Indanone as Substrate

  • Fill, Taicia Pacheco;Silva, Jose Vinicius Da;Oliveira, Kleber Thiago De;Silva, Bianca Ferreira Da;Rodrigues-Fo, Edson
    • Journal of Microbiology and Biotechnology
    • /
    • 제22권6호
    • /
    • pp.832-837
    • /
    • 2012
  • The oxidative potential of the fungus Penicillium brasilianum, a strain isolated as endophytic from a Meliaceae plant (Melia azedarach), was investigated using 1-indanone as substrate to track the production of monooxygenases. The fungus produced the dihydrocoumarin from 1-indanone with the classical Baeyer-Villiger reaction regiochemistry, and (-)-(R)-3-hydroxy-1-indanone with 78% ee. Minor compounds that had resulted from lipase and SAM activities were also detected. The biotransformation procedures were also applied using a collection of Penicillium and Aspergillus fungi obtained from M. azedarach and Murraya paniculata. The results showed that Baeyer-Villiger were mostly active in fungi isolated from M. azedarach. Almost all fungi tested produced 3-hydroxy-1-indanone.

Design of a 6-bit 500MS/s CMOS A/D Converter with Comparator-based Input Voltage Range Detection Circuit

  • Dae, Si;Yoon, Kwang Sub
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제14권6호
    • /
    • pp.706-711
    • /
    • 2014
  • A low power 6-bit flash ADC that uses an input voltage range detection algorithm is described. An input voltage level detector circuit has been designed to overcome the disadvantages of the flash ADC which consume most of the dynamic power dissipation due to comparators array. In this work, four digital input voltage range detectors are employed and each input voltage range detector generates the specific clock signal only if the input voltage falls between two adjacent reference voltages applied to the detector. The specific clock signal generated by the detector is applied to turn the corresponding latched comparators on and the rest of the comparators off. This ADC consumes 68.82 mW with a single power supply of 1.2V and achieves 4.3 effective number of bits for input frequency up to 1 MHz at 500 MS/s. Therefore it results in 4.6 pJ/step of Figure of Merit (FoM). The chip is fabricated in 0.13-um CMOS process.

페놀화합물에 대한 묵밭 초본식물의 감수성 (A Survey of Old-field Herbs for Susceptibility to Phenolic Compounds)

  • ;길봉섭;임양재
    • Journal of Plant Biology
    • /
    • 제30권1호
    • /
    • pp.11-20
    • /
    • 1987
  • Phenolic compounds, p-coumaric and p-hydroxybenzoic acids, known as inhibitors for development and growth of many pioneer species on early stage of succession were used for the test fo susceptibility in various herbs collected from abandoned agricultural fields in the vicinity of Amherst(U. S. A.). The percent inhibition was generally greater for p-coumaric acid than for p-hydroxybenzoic acid. Concentrations of 5$\times$10-5 and 5$\times$10-4M generally had no significant effects, but at 5$\times$10-3M was inhibitory to germination and growth of tested species. And the percent inhibition caused by the two phenolics was correlated (r=.843, p<.01). Also the indices of resistance for germination and elongation were significant (r=.695, p<.01) in this study. While Cirsium and Lepidium invading species of early stage of succession were sharply susceptible for toxic activity by phenolic acids.

  • PDF

전동차용 IGBT형 추진제어장치의 본선시험에 관한 연구 (A Study On Field Test of IGBT Type Propulsion System fo Electric oilway)

  • 정만규;고영철;방이석;서광덕
    • 전력전자학회논문지
    • /
    • 제5권5호
    • /
    • pp.515-521
    • /
    • 2000
  • 본 논문은 전동차용 추진장치인 IGBT VVVF 인버터의 현차시험에 관한 것이다. IGBT VVVF인버터는 1,650kVA급으로 개발되었다. 추진 인버터의 신뢰성과 성능을 확인하기 위하여 서울시 지하철 6호선에서 본선시험을 하였다. 시험 차량구성은 4M4T로 구성되었으며, 전장품은 4대의 VVVF인버터, 16대의 견인전동기 및 2대의 SIV로 구성하였다. 추진장치는 1C4M으로 구성하였다. 현차시험을 통하여 추진용 인버터의 우수한 가·감속 능력과 가가속도 특성 및 구배에서의 등판능력을 확인 할 수 있었다.

  • PDF

한국산 벗굴, Ostrea denselamellosa의 유생발생 (The Development of Larvae and Egg of Flat oyster, Ostrea denselamellosa in Korea)

  • 양문호;한창희;김형섭;최상덕
    • 한국패류학회지
    • /
    • 제15권2호
    • /
    • pp.115-119
    • /
    • 1999
  • We investigated the processes of egg and larval developments for aquaculture technique development of seedling production fo the flat oyster, Ostrea denselamellosa. Teo flat oyster of larviparous type was different from the pacific oyser (ovivarous type) because their larvae (trochophore and prodissoconch larvae) in the gill released into the seawater. The process of egg development was observed by artificial fertilization at $25^{\circ}C$, using a dissecting method. The sizes of Unfertilized eggs ranged from 80 to 90 $\mu\textrm{m}$ and fertilized eggs with globule-shape was 90-100 $\mu\textrm{m}$. The Polar body appeared after fertilization and egg cleavage began within 1 hour, reaching the blastula stage after 10 hours. The trochophore in the gill appeared 2-3 days after fertilization and grew to the prodissoconch larvae (130 140 $\mu\textrm{m}$) having a complete shell after 1-2 days. The shell of prodissoconch larvae grew to 205 220 $\mu\textrm{m}$ after 10 hours, and then they became umbo stage larvae showing oval in shape. The velum of umbo stage larvae was degenerated about 17-20 days after fertilization and grew into a pediveliger with a developed foot, at this time, the shell length size was 320 360 $\mu\textrm{m}$.

  • PDF

Solid-salt pressure-retarded osmosis with exothermic dissolution energy for sustainable electricity production

  • Choi, Wook;Bae, Harim;Ingole, Pravin G.;Lee, Hyung Keun;Kwak, Sung Jo;Jeong, Nam Jo;Park, Soon-Chul;Kim, Jong Hak;Lee, Jonghwi;Park, Chul Ho
    • Membrane and Water Treatment
    • /
    • 제6권2호
    • /
    • pp.113-126
    • /
    • 2015
  • Salinity gradient power (SGP) systems have strong potential to generate sustainable clean electricity for 24 hours. Here, we introduce a solid-salt pressure-retarded osmosis (PRO) system using crystal salt powders rather than seawater. Solid salts have advantages such as a small storage volume, controllable solubility, high Gibbs dissolution energy, and a single type of water intake, low pretreatment costs. The power densities with 3 M draw solutions were $11W/m^2$ with exothermic energy and $8.9W/m^2$ without at 35 bar using a HTI FO membrane (water permeability $A=0.375L\;m^{-2}h^{-1}bar^{-1}$). These empirical power densities are ~13% of the theoretical value.