• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.11 no.2
• /
• pp.68-74
• /
• 2015

Time domain response analysis for vibro-impact nonlinear behavior of multi-span tube with loose supports was performed using commercial FEA code and user subroutine. Support geometry of multi-span tube with a finite gap is realistically modeled by analytical rigid surface. Model of hydrodynamic force is based on the Qusai-steady model which accounts for the inclined angle of relative flow velocity and time delay between flow force and resulting tube motion. During tube vibration from flow loading, impact and friction at the support location is simulated using commercial FEA code with master slave contact algorithm. Analysis results has reasonable agreement with those of references and test experience. Plan of further refinement of analysis model and future test verification is briefly introduced.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.77-84
• /
• 2018

The turbine flowmeter is selected for high precision and reproducibility at the time of flow rate measurement but causes various uncertainty factors of measurement in the difference between the standard environmental condition at calibration and the environmental condition at the site. Also, a reliable interpolation method is required for use in sections other than calibrated measurement values. Therefore, in this paper, in order to improve the reliability of the flow rate measurement, we designed and manufactured a device that accurately measures the output signal of the turbine flowmeter, interpolates the value of the calibrated result value, and corrects the temperature change in real time We confirmed the reliability of the measurement at the site to carry out the performance verification.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.4
• /
• pp.22-27
• /
• 2009

This study focus on verification of the thermal efficiency of volumetric receiver with 5k Wth Dish-type solar thermal system. Spiral flow path shaped on receiver and working fluid(steam) flow along with this flow path. Porous material for radiation-thermal conversion used in former researches are substituted with the stainless steel wall installed along the spiral flow path. Numerical analysis for the flow path and temperature distributions are carried out. Numerical results are compared with experimental data. Using the numerical model, the heat transfer characteristics of spiral type receiver for dish-type solar thermal systems are known and the thermal performance of the receiver can be estimated.

• Journal of the Korea Society for Simulation
• /
• v.11 no.4
• /
• pp.43-55
• /
• 2002

Vessel traffic safety management means the managerial technical measures for improving the marine traffic safety in general terms. The main flow of vessel traffic safety management is that: 1) Traffic Survey, 2) Replay by Marine Traffic Flow Simulation, 3) Quantitative Assessment, 4) Policy Alternatives, 5) Prediction·Verification. In the management of vessel traffic safety, it is most important to establish assessment models that can numerically estimate the current safety level and quantitatively predict the correlation between the measures to be taken and the improvement of safety and the reduction of ship handling difficulties imposed on mariners. In this paper, the replay model for traffic flow simulation was made using marine traffic survey data, and the present traffic situation became replay in the computer. An attempt was made to rate the current safety of ports and waterways by applying the Environmental Stress model. And, as a countermeasure for traffic management, by taking of, the promotion of total traffic congestion in early morning rush hour, the correlation between traffic control rate and the reduction in ship handling difficulties imposed on mariners was predicted quantitatively.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2547-2555
• /
• 2021

The frequency of reactor coolant leakage is expected to increase over the lifetime of a nuclear power plant owing to degradation mechanisms, such as flow-acceleration corrosion and stress corrosion cracking. When loss of coolant accidents (LOCAs) occur, several parameters change rapidly depending on the size and location of the cracks. In this study, leak flow during LOCAs is predicted using a deep fuzzy neural network (DFNN) model. The DFNN model is based on fuzzy neural network (FNN) modules and has a structure where the FNN modules are sequentially connected. Because the DFNN model is based on the FNN modules, the performance factors are the number of FNN modules and the parameters of the FNN module. These parameters are determined by a least-squares method combined with a genetic algorithm; the number of FNN modules is determined automatically by cross checking a fitness function using the verification dataset output to prevent an overfitting problem. To acquire the data of LOCAs, an optimized power reactor-1000 was simulated using a modular accident analysis program code. The predicted results of the DFNN model are found to be superior to those predicted in previous works. The leak flow prediction results obtained in this study will be useful to check the core integrity in nuclear power plant during LOCAs. This information is also expected to reduce the workload of the operators.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.7
• /
• pp.881-891
• /
• 2020

In recent years, large-scale development of coastal areas has caused the loss of many lives and extensive property damage in coastal areas, due to wave overtopping caused by high-wave invasion and strong typhoons. However, coastal inundation studies considering the characteristics of domestic coastal areas are insufficient. This study is a methodology study that aimed to reproduce inundation of surge and wave complex elements by applying the ADCSWAN (ADCIRC+SWAN) and FLOW-3D models. In this study, the boundary data (sea level, wave) of the FLOW-3D model was extracted using the ADCSWAN (ADCIRC+SWAN) model and applied as the input value of the FLOW-3D model and a reproduction was created of the Flooding due to surge and overtopping in Busan Marine City when the typhoon Chaba passed. In addition, the existing overtopping empirical equation and the overtopping calculated by the FLOW-3D model were compared, and for coastal inundation, a qualitative verification was performed using the Inundation Trace Map of Land and Geospatial Informatrix Corporation, and the effectiveness of this study was reviewed.

• Journal of Korean Society on Water Environment
• /
• v.34 no.1
• /
• pp.33-45
• /
• 2018

In this study, we discussed the application of Watershed model and Load Duration Curves (LDC) in Total Water Load Management System. The Flow Duration Curves (FDC) and the LDC were generated using the results of the daily HSPF model and analyzed on monthly or yearly flow duration variability, and non-point pollutant discharge loads by entire flow conditions. As a result of the calibration and verification of the HSPF model, both the flow and the water quality were appropriately simulated. The simulated values were used to generate the Flow Duration Curve and the Load Duration Curve, and then the excess rate by entire flow conditions was analyzed. The point and non-point pollutant discharge loads for entire flow conditions were calculated. It is possible to evaluate the variability of water quality in specific flow duration through the curves reflecting the flow duration variability and to confirm the characteristics of the pollutant source. For a more scientific Total Water Load Management System, it is necessary to switch from a current system to a system that can take into account the entire flow conditions. For this, the application of the watershed model and load duration curve is considered to be the best alternative.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.496-502
• /
• 2006

The complexity of IC has rapidly increased as VLSI fabrication technology has grown up quickly. This paper proposes verification methods for data conflicts and protocol between IPs for SoC with coverage metrics. The high-level events is defined to cooperation between blocks or process statement in HDL, or a sequence of performing a job compared to low-level event. They are classified into two categories, resource conflicts and protocol or specification-dependent conflicts. And two coverage metrics used for code coverage in low-level event are proposed to verify the hish-level events. The events of resource conflicts can be detected by using statement coverage metric if global signal or variable has flags in a testbench program, and protocol-dependent events can be checked by data flow metric or path metric.

• Journal of the Korea Society for Simulation
• /
• v.27 no.3
• /
• pp.53-63
• /
• 2018

Since warfare surroundings getting complex and diverse in the future, it is not simple to make appropriate structures and organizations for military groups along the phenomenon. Therefore, this study proposes a methodology of verification for army staff's structure and organization by units in the future using System Dynamics(SD). The procedure of using SD for the verification is a calculation of database(DB), the design of causal loop diagram, and the simulation and analysis. First, DB such as individuals' workload and time is calculated through observation after a real group of staff. Second, the causal loop diagram is considered by a flow of task, and it is modeled. Third, the DB is entered into the model and simulated for analyzing of appropriacy. This study used Powersim program for designing the SD model. One of the weaknesses of the methodology of this study is possibilities of a different result by the DB by observers and perspectives by analysts. As supplementation for the weakness, this study includes research analysis and surveys for the total analysis. The meaning of this study is that it suggests a methodology of warfighting experimentation to analyze structure and organization of military groups with quantifying suitability in the scientific method.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.6
• /
• pp.785-795
• /
• 2019

This paper is a study on the modeling of the quantity estimation model for offshore plant Material handling equipment in FEED(Front End Engineering Design) verification stage using system engineering approach which is an engineering design methods. The relevant engineering execution procedure is not systemized although the operation method and Material handling equipment selection with weight and space constraints is a key part of the FEED. Using the system engineering process, the stakeholder requirements analysis process, the system requirements analysis, and the final system architecture design were sequentially performed, and the process developed through the functional development diagram and Requirement traceability matrix (RTM) was verified. In addition, based on the established process, we propose a Material handling quantity estimation model and Quantity calculation verification Table that can be applied at the FEED verification stage and we verify the applicability through case studies.