• Journal of Advanced Navigation Technology
• /
• v.4 no.1
• /
• pp.11-22
• /
• 2000

Instrument flight simulators are used for training the interpretation and operation techniques for all kinds of aircraft instruments, cockpit procedures, etc., in order that pilots cope with the situations which can be occurred in actual flight. However, the simulators developed so far are concerned about operating in same environment to actual aircraft. And little researches concentrate on developing systematic training system for basic tasks and takeoff-landing procedures, and automatic evaluation methods on the training results. Therefore, in this paper, we propose implementation and evaluation methods for flight tasks such as tasks in flight, takeoff-landing procedures and course flight.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.2
• /
• pp.18-24
• /
• 2023

According to the results of a survey by Boeing, LOC-I (Loss of Control in Flight) was the highest in the number of deaths by fatality accident category in the past 10 years from 2012 to 2021, and the number of deaths worldwide due to LOC-I accidents was 757. It turned out to be the biggest cause of aircraft fatalities, with a figure close to twice the sum of UNK (Unknown or Undetermined), which is the 2nd place, and CFIT (Controlled Flight Into or Toward Terrain), which is the 3rd place. This study set six scenarios related to spatial disorientation that may occur during sensory-dependent flight targeting student pilots and instructor pilots at domestic designated specialized educational institutions using flight simulation training equipment, and in each scenario, the pilot's. The need for SDRT (Spatial Disorientation Recovery Training) is verified by analyzing the flight experience and recovery ability by qualification, and SDRT is repeatedly performed to verify and present the training cycle and time.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.26.3-26.3
• /
• 2008

This research develops a GPS-based formation-flying testbed (FFTB) for formation navigation and control. The FFTB is a simulator in which spacecraft simulation and modeling software and loop test capabilities are integrated for test and evaluation of spacecraft navigation and formation control technologies. The FFTB is composed of a GPS measurement simulation computer, flight computer, environmental computer for providing true environment data and 3D visualization computer. The testbed can be simulated with one to two spacecraft, thus enabling a variety of navigation and control algorithms to be evaluated. In a formation flying simulation, GPS measurement are generated by a GPS measurement simulator to produce pseudorange, carrier phase measurements, which are collected and exchanged by the flight processors and subsequently processed in a navigation filter to generate relative and/or absolute state estimates. These state estimates are the fed into control algorithm, which are used to generate maneuvers required to maintain the formation. In this manner, the flight processor also serves as a test platform for candidate formation control algorithm. Such maneuvers are fed back through the controller and applied to the modeled truth trajectories to close simulation loop. Currently, The FFTB has a closed-loop capability of simulating a satellite navigation solution using software based GPS measurement, we move forward to improve using SPIRENT GPS RF signal simulator and space-based GPS receiver

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.133-140
• /
• 2018

In recent years, model-based design techniques have been used as a way to support cost reduction and safety certification in the development of avionics systems. In order to support performance analysis and safety analysis of aircraft and avionics equipment (item) using model based design, we developed a multi-domain simulation environment that inter-works with heterogeneous simulators. We present a multi-domain simulation environment that can verify air data computers and integrated multi-function probes at the aircraft level. The model was developed by Simulink and the flight simulator X-Plane 10 was used to verify the model at the aircraft level. Avionics model functions were tested at the aircraft level and the air data errors of the model and flight simulator were measured within 0.1%.

• Advances in aircraft and spacecraft science
• /
• v.8 no.4
• /
• pp.273-287
• /
• 2021

Model-based, data-driven and physics-based approaches represent the state-of-the-art techniques to estimate the aircraft flow angles, angle-of-attack and angle-of-sideslip, in avionics. Thanks to sensor fusion techniques, a synthetic sensor is able to provide estimation of flow angles without any dedicated physical sensors. The work deals with a physics-based scheme derived from flight mechanic theory that leads to a nonlinear flow angle model. Even though several solvers can be adopted, nonlinear models can be replaced with less accurate but straightforward ones in practical applications. The present work proposes a linearisation to obtain the flow angles' closed form solution that is verified using a flight simulator. The main objective of the paper, in fact, is to analyse the estimation degradation using the proposed closed form solutions with respect to the nonlinear scheme. Moreover, flight conditions, where the proposed closed form solutions are not applicable, are identified.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.135-140
• /
• 1992

This paper presents the configuration, HILS procedure and performance simulation results of the RPV autopilot including a strapdown AHRS. Real time hardware-in-the-loop simulation was performed by using a 3 axis flight motion simulator alonged assumed flight trajectory of the RPV. Being compared with the result of the 6 DOF simulation, the HILS results showed that the performance of the autopilot was satisfactory.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.711-719
• /
• 2008

Although non-real time simulation and pilot based evaluations are available for the development of flight control computer prior to real flight tests, there are still many risky factors. The control law designed for prototype aircraft often leads to degraded performance from the initial design objectives, therefore, the proper evaluation methods should be applied such that flight control law designed can be verified in real flight environment. The one proposed in this paper is IFS(In-Flight Simulator). Currently, this system has been implemented into the F-18 HARV(High Angle of Attack Research Vehicle), SU-27 and F-16 VISTA(Variable stability. In flight Simulation Test Aircraft) programs. This paper addresses the concept of switching mechanism for FLCC(Flight Control Computer)-SWMC(Switching Mechanism Computer) using 1553B communication based on flight control law of advanced supersonic trainer. And, the fader logic of TFS(Transient Free Switch) and stand-by mode of reset '0' type are designed to reduce abrupt transient and minimize the integrator effect in pitch axis control law. It hans been turned out from the pilot evaluation in real time that the aircraft is controllable during the inter-conversion process through the flight control computer, and level 1 handling qualities are guaranteed. In addition, flight safety is maintained with an acceptable transient response during aggressive maneuver performed in severe flight conditions.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.251-252
• /
• 2019

본 논문에서는 소형 무인항공체 (UAV, Unmanded Aerial Vehicle)가 제한된 공역 (airspace)에서 발생할 수 있는 상황을 예측할 수 있는 시뮬레이터를 개발하여 테스트를 수행한 결과를 보인다. 많은 소형 UAV가 밀집해서 비행하는 상황을 가정하여 충돌의 발생 가능성을 줄이기 위해 공역을 고도에 따라 계층으로 나누었으며 시뮬레이터에 이를 반영하였다.

• ETRI Journal
• /
• v.17 no.3
• /
• pp.1-16
• /
• 1995

An advanced real-time satellite simulator (ARTSS) has been developed to support the ground operations activities of the ETRI satellite control system, such as testing of the system facilities, validation of flight control procedures, verification of satellite commands as well as training of the ground operators. The design of ARTSS is based on the top-down approach and makes use of a modular programming to ensure flexibility in modification and expansion of the system. Graphics-based monitoring and control facilities enhance the satellite simulation environment. The software spacecraft model in ARTSS simulates the characteristics of a geostationary communication satellite using a momentum bias three-axis stabilization control technique. The system can be also interfaced with a hardware payload subsystem such as Ku-band communication transponder to enhance the simulator capability. Therefore, ARTSS is a high fidelity satellite simulation tool that can be used on low-cost desk top computers. In this paper, we describe the design features, the simulation models and the real-time operating functions of the simulator.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.61-66
• /
• 2006

This paper proposes a method for generating radar images used in ship handling simulator, which includes mathematical logics based on radar equations and information from Openflight format files. In order to make radar image much similar to that of real radar in PPI type, the proposed mathematical logic derives radar video signals under the consideration of riot only the data form flight format file of simulation scenes, but also geographical radar's position. The proposed method is considered useful to make radar images in ship handling simulator with accuracy and reality.