• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1678-1685
• /
• 1993

This paper considers a time delay control of noncolocated flexible mechanical systems in discrete time domain. A stability criterion suggested in the previous paper is,extended in the consideration of infinite mode property of flexible systems and finite control sampling frequency. Based on the stability criterion, the one step advanced discrete time derivative control is suggested, which can stabilize infinite number of modes of a flexible system. The sensitivity analysis shows the robustness of the one step advanced control to the system parameter uncertainties and time delay errors. Application to a simply supported beam verifies the extended stability criterion and the effectiveness of the one step advanced D-control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.130.5-130
• /
• 2001

This paper presents a discrete-time sliding mode control method for linear time-invariant systems with matched uncertainties. In this paper, we suggest a method of adding a command generator using input shaping filter to a discrete-time sliding mode controller. We design the number of steps required to reach the sliding layer and the magnitude of a control input, respectively using the shaping filter. Therefore we can minimize the excitation of the resonance mode and increase the tracking performance of a system. Simulation results are included to show its effectiveness.

• 소음진동
• /
• 제6권1호
• /
• pp.35-44
• /
• 1996

본 논문에서는 단일 링크 유연 암 선단위치의 강건제어를 수행하기 위하여 새로운 형태의 퍼지 슬라이딩모드 제어기를 제안하였다. 우선 시스템 불확실성의 경계치를 알고 있다는 가정하에 슬라이딩모드 제어기를 먼저 설계하였다. 슬라이딩 모드 제어기 설계시 주어진 시스템의 슬라이딩모드 운동 중 안정성을 보장하는 슬라 이딩 평면을 최적제어기법으로 설계하였으며, 리칭상태를 최소화 시킴으로써 빠른 응답과 불확실성에 대하여 더욱 강건함을 얻도록 하기 위해서 주어진 초기 조건을 고려하는 이동 슬라이딩 평면을 적용하였다. 또한, 직접 측정이 어려운 속도 상태 변수들의 예측값을 구하기 위하여 비연계 저차 관측기를 설계하였다. 이와같이 설계 된 슬라이딩모드 제어기는 적용시 시스템에 존재하는 떨림현상으로 인하여 실제적인 진동제어 시스템에 적용하는데 어려운 점을 갖고 있다. 따라서 이러한 떨림현상을 감소시키기 위하여 슬라이딩 모드 제어기와 퍼지제어기를 연계시킨 퍼지-슬라이딩 모드 제어기를 구성하였다. 퍼지제어기 설계시 미리 규정된 슬라이딩 평면식과 오차 공간상의 상태점과의 관계로부터 퍼지제어규칙을 선정해 제어기를 설계하였다. 이와 같이 구성된 제어기에 대한 컴퓨터 시뮬레이션을 수행하여 떨림현상 감소 효과와 불확실성에 대한 강건성 유지를 입증하였다.

• 전자공학회논문지B
• /
• 제30B권9호
• /
• pp.36-44
• /
• 1993

In the development of a high speed and light weight manipulator, it is necessary to consider the flexibility of a robotic arm. The infinite dynamics must be analyzed to obtain the finite mode modeling to achieve the feasible controller design of the robotic arm. The modeling procedures of the flexible robot arm, and natural frequencies and mode shapes by the constrained and unconstrained mode method are illustrated. The transfer function of the robot arm with a payload is also shown. The controller is designed by the pole assignment and optimal control theory to compensate for the unmodelled dynamic effects to the low order system. Also, the pole assignment method involving the harmonic vibration mode is presented through computer simulation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1054-1057
• /
• 2003

A Real Time Mode Selecting Stochastic Controller (RTMSSC) is developed as a new control strategy for a vibrating system under irregular disturbance. Displacement information and frequency characteristics obtained from me::id analysis of the system are used to design a Mode Selecting Controller. This Paper explains design technique of RTNSSC by applying it to the suppression of a flexible beam experiencing random vibration. The RTMSSC is designed by stochastic control from the modal information. The frequency information of the flexible system is utilized from the Mode Selecting Unit (MSU) based on a Fast-Fourier Transformation algorithm. The performance of the proposed technique, RTMSSC, is compared with that of Real Time Stochastic Controller developed recently, which show quite promising results.

• 융합신호처리학회논문지
• /
• 제3권1호
• /
• pp.61-66
• /
• 2002

A fuzzy control strategy is described which is utilized to control the joint angle and tip deflection in single flexible manipulator. In this paper, an existing model for a single flexible manipulator is used for the initial development of an FLC. One FLC is designed to govern the joint angle of the manipulator as it is rotated from one position to another, and the second FLC is designed to attenuate the tip deflection which result from joint angle body motion. Reference Trajectory Command is an important method to reduce vibration in flexible beam. This paper presents a very simple command control shaping which eliminates multiple mode residual vibration in a flexible beam combined parallel fuzzy controller. The effectiveness of proposed scheme is demonstrated through computer simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1700-1703
• /
• 1997

The flexibility of the manipulator inevitably inducess the vibration at the end effector. For the increase in speed and accuracy at the end tip, in this work, position and vibration control of a flexible manipuator with a separate voice coil type actrator for vibration suppression, is studied. The flexible manipulator with a tip mass is modeled an Euler-Bernoulli beam. An H.inf. controller is designed in order to make the controlled system robust against unmodeled higher-order mode vibration of the manipulator, output sensor noise, and etc. Simulations and experiments show that the modeling of the system is valid and that robust vibration control of the flexible manipulator is efficiently achieved.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.67.3-67
• /
• 2001

A fuzzy control strategy is described which is utilized to control the joint angle and tip deflection in single flexible manipulator. In this paper, an existing model for a single flexible manipulator is used f3r the initial development of an FLC. One FLC is designed to govern the joint angle of the manipulator as it is rotated from one position to another, and a second FLC is designed to attenuate the tip deflection which result from joint angle body motion. Reference Trajectory Command is an important method to reduce vibration in flexible beam. This paper presents a very simple command control shaping which eliminates multiple mode residual vibration in a flexible beam combined fuzzy controller ...

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.971-976
• /
• 1996

A flexible pointing system mounted on top of a vehicle suffers from performance degradation due to bending vibrations as the vehicle runs on a bump course. In order to improve the pointing performance, the pointing structure's vibrations should be suppressed. In this paper, a nonlinear controller is designed to control the tip position of the pointing system while actively suppressing the vibrations. To cope with high order dynamics and nonlinearities of the plant and hydraulic actuating system, a two-stage sliding mode controller is devised. The desired actuating pressure is obtained in the first stage and then the in put current In the hydraulic servo system is computed to generate the pressure. The simulation results show the effectiveness of this scheme and improvements in pointing accuracy.

• 대한기계학회논문집A
• /
• 제20권5호
• /
• pp.1498-1507
• /
• 1996

This paper presents a robust control of a smart flexible structure featured by a piezofilm actuator characterizing its light weght and quick response time. A mathematical governing equation for the proposed structure is derived by employing Hamilton's principle and a state space control model is subsequentrly obtained through modal analysis. Uncertain system parameters such as frequency variation are included in the control model. A sliding mode control theroy thich has inherent robustness to systme uncertainties is adopted to design a tracking controller for the peizofilm actuator. Using the output informaiton from the tip deflection sensor, a full-order observer is constructed ot estimate state variables for the system. Tracking performances for desired trajectories of sinusoidal amd step functions are evaluated by undertaking both simulation and experimental works.