• 한국소음진동공학회논문집
• /
• 제15권9호
• /
• pp.1023-1029
• /
• 2005

In this paper, a dynamic model for the rotor shaft-coupling-blade system was developed. The blades are attached to a disk and driven by an electric motor shaft which is flexible in torsion. We assumed that the shaft torsional flexibility was lumped in the flexible coupling which is usually adopted in rotor systems. The Lagrangian approach with the small deformation theory for both blade-bending and shaft-torsional deformations was employed for developing the equation of the motion. The Assumed Modes Method was used for estimating the blade transverse deflection. The numerical results highlight the effects of both structural damping of the system and the torsional stiffness of the flexible coupling to the dynamic response of the blade. The results showed strong coupling between the blade bending and shaft torsional vibrations in the form of inertial nonlinearity, stiffness hardening and softening.

• KIEAE Journal
• /
• 제10권5호
• /
• pp.43-55
• /
• 2010

This research investigated 162 residential unit plans which were located in Seoul and Gyonggi Province ranging from 58 to $118m^2$ unit net area recently. Through the investigation of unit plans, a matrix was developed based on the 5 criteria for space composition types. 5 criteria are building stock types, W/D ratio of units, unit net area, number of bay to the main orientation, and openness types. After review the matrix, 10 typical unit types were selected. At the same time, quantitative evaluation indicators were developed based on the 4 criteria such as efficiency, openness, flexibility, environmental sustainability. On each criterion, 3 indicators were developed, and measured on 162 residential unit plans. Firstly, correlation analysis were pursued on 5 criteria for space composition types and 12 quantitative evaluation indicators, and reviewed on each other. Finally, quantitative evaluation indicators of 10 typical unit types were displayed on radar charts in order to show the integrated evaluation on 4 criteria such as efficiency, openness, flexibility, environmental sustainability. From the reviews and radar chart analyses, advantages, disadvantages, and improvements on each typical unit type were presented as research results.

• 한국강구조학회 논문집
• /
• 제17권4호통권77호
• /
• pp.449-457
• /
• 2005

다양한 케이블지지 시스템에 적용이 가능한 슬라이딩을 허용하는 다절점 케이블-트러스 요소를 개발한다. 먼저 일반적인 2절점 케이블-트러스 요소에 대한 유한요소 정식화 과정을 요약하고, 이를 토대로 여러 절점에 연결되어 장력은 동일하지만 절점에서 슬라이딩이 가능한 다절점 케이블-트러스 요소의 탄성강도행렬을 유도한다. 개발된 케이블-트러스 요소를 검증하기 위하여, 케이블 장력을 부정정력으로 선택하고 적합조건을 이용하여 장력을 산정하는 방법(유연도법)을 제시하고 두 방법에 의한 장력 값을 비교한다. 또한 상용 유한요소 해석프로그램의 2절점 트러스요소를 사용한 해석결과와도 비교, 분석한다.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.24-32
• /
• 2012

Direct duty-ratio PWM schemes for continuous fault tolerant operation of matrix converter-fed motor drives are presented. The proposed method features simple modular modulation structure based on per output phase concept, which requires no additional modification on the normal modulation schemes for fault-tolerant applications. Realizations of fault-tolerant strategy applied to different system configurations are also treated to enhance the system flexibility. The proposed method can be effectively applied to treat the motor open phase fault and converter switching device failure. Simulation and experimental results show the feasibility and validation of the proposed strategies.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1188-1200
• /
• 2015

A unified numerical method for computing the quadrature weights, integration matrix, and differentiation matrix is newly developed in this study. For this purpose, a spline-like interpolation using piecewise continuous polynomials is converted into a global spline interpolation formula, with which the quadrature formulas can be derived from integration and differentiation of the transformed function in an exact manner. To prove the usefulness of the suggested approach, both the Lagrange and tension spline interpolations are represented in exactly the same form as global spline interpolation. The applicability of the proposed method on arbitrary nodes is illustrated using two different sets of nodes. A series of validations using three test functions is conducted to show the flexibility in selecting computational nodes with the present method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.109-115
• /
• 2003

This study intends to provide an optimum design of flexible matrix composite driveshafts using a genetic algorithm. An objective function is defined as a combination of shaft flexibility, whirling stability and torsional buckling and the design variables are selected as ply angles and the shaft thickness. Results show that the genetic algorithm can successfully find an optimum solution at which the overall performance of the FMC shafts is significantly enhanced

• Membrane and Water Treatment
• /
• 제14권4호
• /
• pp.175-180
• /
• 2023

Mixed matrix membranes (MMMs) can be a promising alternative for the solution of dye removal from coloured effluents. Polymeric membranes are widely used due to their good film-forming ability, flexibility, separation properties, and cost. However, they have low mechanical, chemical, and thermal resistances. Moreover, the fouling of polymeric membranes is high because of their hydrophobic nature. Hence, there is an increasing interest in organic-inorganic hybrid membranes as a new-generation membrane material. It has been shown that carbon nanotubes have the potential to increase the material properties of polymers with their low density, high strength, hardness, and exceptional aspect ratio. In this work, carbon nanotubes blended MMMs were prepared and methyl orange removal efficiency of them was investigated. Compared to the bare membranes, MMMs showed not only increased hydrophilicity, water content, and pure water flux but also increased methyl orange rejection and flux recovery

• Biomolecules & Therapeutics
• /
• 제16권4호
• /
• pp.425-430
• /
• 2008

The objectives of this study were to prepare PLGA film onto the surface of the capsular tension ring (CTR) for controlled drug release and investigate the influence of plasticizers, the test drug and measurement conditions on flexibility of the film. Film solutions were prepared by dissolving PLGA, plasticizer (triethyl citrate, TEC or polyethylene glycol, PEG), test drug (dexamethasone) in ethyl acetate then films were prepared by spray coating and evaporation method. Then, the flexibility of PLGA film was determined by elongation test. The addition of plasticizer, PEG or TEC to PLGA copolymer caused a depression of glass transition temperature ($T_g$) and the elasticity of PLGA films increased. The addition of dexamethasone to the PLGA/TEC matrix decreased the flexibility of film. Dimensional factors of the PLGA films such as width and thickness were significantly influenced on flexibility of films and film length and elongation speed had no considerable influence on elongation of films. In this study, sufficiently flexible and stable PLGA films capable of being coated onto CTR could be prepared. This PLGA films can be used as a platform for local drug delivery.

• 대한기계학회논문집
• /
• 제16권12호
• /
• pp.2241-2251
• /
• 1992

본 연구에서는 Fig.1에서와 같은 축대칭 평판과 속이 찬 실린더(이하 단순히 실린더라고만 칭함)가 붙은 구조물에서 실린더의 끝단효과가 응력분포에 미치는 영향 을 해석해를 사용하여 고려해 보고자 한다. 이를 위해 얇은 평판에서는 2차원 고전 평판 이론을, 등방성 실린더에서는 끝단효과를 고려하기 위해서 3차원 선형 탄성이론 을 사용하고자 한다. 실린더와 평판의 접합부에서, 평판의 이차원 해와 실린더의 3 차원 해를 연결시키기 위해 접합부에서의 실린더의 유연성을 나타내는 유연성 행렬을 유도한다. 이러한 실린더의 유연성 행렬은 원형평판의 내부 경계조건으로 사용되는 데, 이와 유사한 해석절차는 셀구조물에 활용되어 왔다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 가을 학술발표회논문집
• /
• pp.38-43
• /
• 1993

It is one of classical problems in the elastic theory to analyze contact stresses between elastic bodies. Concrete pavements under traffic wheel loads can be considered as one of these typical problems. In this paper, an elastic plate resting on tensionless elastic half-space is analyzed by finite element method. The Boussinesq's solution of elastic half-space is used to evaluate the flexibility of foundation. One of the principal difficulties in solving the local seperation phenomena between plate and foundation is that the geometry of the system is unknown. To obtain the boundary of contact area, the flexibility matrix of foundation is modified after each cycle of analysis iteratively. Some numerical examples are presented by using these method.