• Journal of the Korean Institute of Gas
• /
• v.15 no.6
• /
• pp.8-13
• /
• 2011

All over the nation, a lot of industrial complex utilize gas as their energy source. Possibilities are fire, explosion, and leakage could happen any time in these large complexes. To prevent these tragic accidents and to minimize the damage when the accident occurs, the development of diagnostic technology for these facilities is imperative. The safety check is conducted on an individual and partial basis, currently. Accordingly, the accumulation and improvement of the safety management technology is necessary in order to make all the different checking techniques and management systems compatible, since checking processes, result interpretation techniques, and subsequent prognoses are not the same. The program provides damage scenarios from gas leakage. The output enables policy makers to predict the degree of infliction. Through this program, engineers are able to design an effective gas safety program to operate and maintain ubiquitous gas facilities.

• Journal of the Korean Institute of Gas
• /
• v.15 no.6
• /
• pp.20-27
• /
• 2011

The consequence analysis (CA) is widely using in the petrochemical plant through adoption of the process safety management (PSM) system, but it has not practical problem that the CA was not reflected effects for employee count, business interruption loss, utility usage, and etc.. In this study, to establish the practical emergency response plan and to achieve risk based management, the consequence based on the damage area and the financial loss were estimated and compared through application on facilities in the petrochemical plant. If the damage area is used, the consequence category must be determined by safety area considering simultaneously damage area, fatality area and toxic area. Also, the consequences based on the financial loss is more practical method for the case of considering process properties and circumstances.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.55-62
• /
• 2010

Monitoring systems are able to report certain events at region of interest(ROI) and to take an appropriate action. From industrial product line full of robots to fire detection, intrusion detection, smart grid application, environmental pollution alarm system, monitoring system has widely used in diverse industry sector. Recently, due to advance of wireless communication technology and availability of low cost sensors, intelligent and/or smart monitoring systems such as sensor networks has been developed. Several deployment methods are introduced to meet various monitoring needs and deployment performance criteria are also summarized to be used to identify weak point and be useful at designing monitoring systems. Both efficiency during deployment and usefulness after the deployment should be assessed. Efficiency factors during deployment are elapsed time, energy required, deployment cost, safety, sensor node failure rate, scalability. Usefulness factors after deployment are ROI coverage, connectivity, uniformity, target density similarity, energy consumption rate per unit time and so on.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.2
• /
• pp.1-10
• /
• 2009

Recently the large scale of forest disaster such as landslide and forest fire gives a very bad impact on not only forest ecosystem but also farm business so that it has became the main issue of environmental problems. In this study, the landslide hazard area forecast method was developed by considering not only the topographic thematic maps based on GIS and satellite images but also amount of rainfall data, which are very important factors of landslide. Uljin-gun was selected as the study area and the GIS weight score and overlay analysis were applied to topographical map and meteorological observation map. Finally the landslide area distribution map was constructed by considering the evaluation criteria. Also, the accuracy could be acquired by comparing the landslide hazard area forecast map and real damaged area extracted from satellite image.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.2
• /
• pp.54-63
• /
• 2010

The intensive rainfall over 455 mm occurred between on 9 to 14 July 2009 triggered debris flows around the mountain area in Jecheon County. We mapped the debris flow area and estimated the debris flow volume using a high resolution digital elevation model (DEM) generated respectively from terrestrial LiDAR (Light Detection And Ranging) and topographic maps. For the LiDAR measurement, the terrestrial laser scanning system RIEGL LMS-Z390i which is equipped with GPS system and high-resolution digital camera were used. After the clipping and filtering, the point data generated by LiDAR scanning were overlapped with digital map and produced DEM after debris flow. The comparison between digital map and LiDAR scanning result showed the erosion and deposition volumes of about $17,586m^3$ and $7,520m^3$, respectively. The LiDAR data allowed comprehensive investigation of the morphological features present along the sliding surface and in the deposit areas.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.4
• /
• pp.387-397
• /
• 2014

This work aims at estimating global warming potentials (GWP) of $CF_3Br$ and HFC-134a among green house gases. It has been reported that they have much higher GWP than $CO_2$ in the atmosphere. $CF_3Br$, halon 1301 which is well known to be a fire extinguisher, as one of the bromine-containing halons has been banned since 2003 due to destruction of ozone. HFCs, a kind of chiller which replaced chlorofluorocarbons (CFCs) are one of greenhouse gases regulated by the Kyoto Protocol. In this study, we produced GWPs of $CF_3Br$ and HFC-134a by calculating a life time and measuring an absorption cross section to obtain a radiative forcing (RF). Their absorption cross sections were measured by using Fourier-transformed infrared spectroscopy (FTS) with a gas cell filled with their certified reference materials at room temperature. As a result, the RFs of $CF_3Br$ and HFC-134a were 0.32 and $0.168Wm^{-2}ppb^{-1}$, respectively and the GWPs were calculated as 7989, 6076, 3903 for $CF_3Br$ and 3855, 1300, 656 for HFC-134a for the time horizon of 20, 100, 500 years, respectively. Overall, uncertainty of the estimated GWPs can be estimated to be about 2.6%. Our results were compared with those proposed by the previous studies (IPCC, 2007; WMO, 1999).

• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.63-69
• /
• 2014

The oxidizer-rich preburner's combustion tests were fulfilled in the development process of staged combustion cycle rocket engines. The exhaust plume from an oxidizer-rich preburner is relatively transparent because combustion takes place in oxidizer rich state. During hot fire tests a still and infrared images were captured to visualize the plume structure, temperature distribution and so on. In addition, the exhaust plume was numerically investigated to figure out the detailed characteristics. The combustion was not considered for the numerical modeling, but the mixing of exhaust plume with circumstantial air was modeled by species transport model with several turbulence models. The inner structure of plume was configured out by the comparison of numerical results with experimental results, and the validity of applied numerical models was verified.

• The Korean Journal of Emergency Medical Services
• /
• v.12 no.2
• /
• pp.85-97
• /
• 2008

Purpose : This study was cross-sectional study to examine the influence of job stress in 119 briefing room workers and aimed to provide the important basic materials for improving working conditions of 119 briefing room workers and further studies. Methods : This study selected 271 workers of 119 briefing room at National Emergency Management Agency and fire stations, metropolitan cities and provinces to examine the influences of job stress of 119 briefing room workers on depression. and as a result of analysis, the following conclusions. Results : 1) The whole average of job stress measure was 3.30. The highest area was interpersonal relationship factor as 3.41, 'job characteristic factor' as 3.36 and communication factor' as 3.01. 2) Total score of whole items of depression was 11.88 and showed slight depression level. 3) There was static correlation between job stress and depression(r=44.7, p= .000). There were statistically significant static correlations between job stress factor and depression(r= .388, p= .000), interpersonal relationship factor and depression(r= .471, p= .000), and communication factor and depression(r= .386, p= .000). 4) There was statistically significant difference in the influence of job stress on depression(B=8.575, p< .001). Influence of job stress on depression was explained as $R^2=.200$. When job stress factors as independent variables were input, interpersonal relationship factor(B=5.062, p< .001) had the greatest influence on depression and there was no statistically significant difference in communication factor(B=2.490, p< .05). Conclusions : It is considered that development of the various programs including program for getting rid of job stress of 119 briefing room workers and counseling program will be needed. particularly, factors such as human relationships and communication in the area of job stress must be the first priority.

• The Korean Journal of Emergency Medical Services
• /
• v.13 no.1
• /
• pp.97-114
• /
• 2009

Purpose : This study was performed to identify the knowledge and educational wants for first-aid and its related factors of senior students in elementary schools. Methods : From July 11-25, 2008, this study surveyed 437 elementary school students using a structured questionnaire. Result : Of the study subjects, 47.6% of the subjects had experienced first-aid conditions 25.4% had injuries, 11.0% had indigestion, 10.5% had sprains, 6.2% had acute abdominal pains, 5.9% had brash, and 5.7% had fractures. The experience rates of first-aid conditions were significantly different according to gender, mothers' educational status, means of school attendance and amount of exercise. The experience rate of first-aid education was 71.4%. There was a significant difference with grade, and school reports. They had education about cardiopulmonary resuscitation (52.5%), injury treatment and desmology(48.7%) in a good order. The score of knowledge about first-aid was $13.95{\pm}4.1$ and it was converted on the basis of 100 points, the results were below 50points, and there was a significant difference in grades. Educational wants for first-aid was 64.3%, and as a result of multi-logistic regression analysis of characteristics relating to educational wants, there was a significant difference between gender, grade, mothers' educational status, and amount of exercise. Conclusion : The rate of first-aid experience of elementary school students was high, but as their recognition and knowledge on first-aid was low, the importance of first-aid education and educational wants should be reflected for practical and organized education.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.5
• /
• pp.865-874
• /
• 2020

Offshore drilling units have a very dangerous working conditions due to the harsh working environment of the ocean and the high possibility of fire or explosion. This study would identify the hazards that emerge from the marine environment in the operation and maintenance phase of offshore drilling units and show how these hazards can be reduced through risk assessment/management. Various risk reduction and management measures were first reviewed, and Job Safety Analysis (JSA) was selected as the risk assessment technique of this study. In order to understand the characteristics of offshore drilling operations, accident statistics of onshore and offshore drilling were analyzed and compared with each other, and major risk factors for offshore drilling were derived. The jobs in which offshore drilling accidents occur more frequently than onshore drilling was analyzed as the job of fastening, transporting and moving pipes and various materials. This result is due to the limited space of the ocean and the work environment that is prone to being shaken by wind, waves and ocean currents. Based on these statistical results, the job of picking and making up drill pipes was selected as a high-risk job, and JSA was performed as an example. A detailed safety check procedure is proposed so that workers can fully recognize the danger and perform work in a safe state that has been confirmed.