• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1592-1602
• /
• 1990

본 연구에서는 최근에 주목되고 급속한 발전을 이루고 있으며 요소분할이 표 면만으로 가능하고 3차원해석에서도 데이터의 준비가 용이할 뿐만 아니라 탄성문제 특 히 균열문제의 해석에서 우수한 결과를 나타내는 경계요소법(boundary element metho- d)을 도입하여 무한영역에 대한 해석해인 Kelvin해를 기본해(fundamental solution)로 하고, 기본해에 대한 성질을 파악하여 3차원 경계요소법에 의한 선형파괴역학의 수치 해석용 프로그램을 개발해서 유한판재에 존재하는 표면균열의 응력확대 계수(Stress Intensity Factor : SIF) 값을 계산 및 비교 검토하고, 나아가서 혼합 모드(mode I+mode II)표면균열로 확장시켜 문제가 되고 있는 유한판재내의 표면균열 확장시켜 문 제가 되고 있는 유한판재내의 표면균열 결함평가의 해석에 유용한 응력확대 계수의 해 를 얻는 것을 목적으로 한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.278-283
• /
• 2004

Many analysis methods, including finite element method, have been suggested and used for assessing the integrity of cracked structures. In the paper, in order to analyze arbitrarily shaped three dimensional cracks in an infinite body, the finite element alternating method is extended. The cracks are modeled as a distribution of displacement discontinuities by the displacement discontinuity method and the symmetric Galerkin boundary element method. Applied the proposed method to several example problems for planner cracks in finite bodies, the accuracy and efficiency of the method were demonstrated.

• 한국해양공학회지
• /
• 제23권1호
• /
• pp.16-23
• /
• 2009

The three-dimensional ship motion with forward speed was solved by a finite element method in the time domain. A boundary value problem was described in the frame of a fixed-body reference, and the problem was formulated according to Double-Body and Neumann-Kelvin linearizations. Laplace's equation with boundary conditions was solved by a classical finite element method based on the weak formulation. Chebyshev filtering was used to get rid of an unwanted saw-tooth wave and a wave damping zone was adopted to impose a numerical radiation condition. The time marching of the free surface was performed by the 4th order Adams-Bashforth-Moulton method. Wigley I and Wigely III models were considered for numerical validation. The hydrodynamic coefficients and wave exciting forces were validated by a comparison with experimental data and the numerical results of the Wigley I. The effects of the linearization are also discussed. The motion RAO was also checked with a Wigley III model through mono-chromatic and multi-chromatic regular waves.

• 대한수학회지
• /
• 제41권4호
• /
• pp.681-715
• /
• 2004

Mathematical formulation and numerical solutions of an optimal Dirichlet boundary control problem for the Boussinesq equations are considered. The solution of the optimal control problem is obtained by adjusting of the temperature on the boundary. We analyze finite element approximations. A gradient method for the solution of the discrete optimal control problem is presented and analyzed. Finally, the results of some computational experiments are presented.

• Structural Engineering and Mechanics
• /
• 제26권1호
• /
• pp.69-86
• /
• 2007

A four-noded plate bending quadrilateral (PBQ4) and an eight-noded plate bending quadrilateral (PBQ8) element based on Mindlin plate theory have been adopted for modeling the thick plates on elastic foundations using Winkler model. Transverse shear deformations have been included, and the stiffness matrices of the plate elements and the Winkler foundation stiffness matrices are developed using Finite Element Method based on thick plate theory. A computer program is coded for this purpose. Various loading and boundary conditions are considered, and examples from the literature are solved for comparison. Shear locking problem in the PBQ4 element is observed for small value of subgrade reaction and plate thickness. It is noted that prevention of shear locking problem in the analysis of the thin plate is generally possible by using element PBQ8. It can be concluded that, the element PBQ8 is more effective and reliable than element PBQ4 for solving problems of thin and thick plates on elastic foundations.

• 한국음향학회지
• /
• 제31권3호
• /
• pp.142-150
• /
• 2012

도파관유한요소법 (waveguide finite element method, WFEM)은 단면의 형상이 길이방향으로 일정한 도파관 구조물의 진동을 해석하기 위한 수치해석 기법이다. 도파관유한요소법은 2차원 단면만을 FE 모델링하여 길이방향 파동 전파를 해석하므로 기존의 유한요소법에 비해 해석 모델의 크기가 작고 연산 시간이 짧다는 장점을 가진다. 본 연구에서는 기존의 도파관유한요소법을 확장하여 내부 및 외부에 유체가 채워진 도파관 구조물에 대한 진동 해석을 수행하였다. 이를 위해 내부 유체와 도파관 구조물은 WFE로, 외부 유체는 파수경계요소 (waveguide boudnary element, WBE)로 모델링하고 이들을 연성시킨 운동방정식을 제시하였다. 이 방법의 적용 예로써 내부에 물이 채워진 몰수된 파이프의 진동 및 방사 음향 파워를 해석하였다. 내부 및 외부 유체의 유/무에 따른 분산 선도와 가진점 모빌리티 (point mobility)를 구하고 유체 연성의 효과를 살펴보았다.

• 전산구조공학
• /
• 제6권4호
• /
• pp.99-105
• /
• 1993

본 연구에서는 보울트-너트 체결기구의 체결장력 설계(Pre-Load Design)시 중요한 인자의 하나인 체결체의 강성(Stiffness)을 유한요소법을 이용하여 해석하였다. 비선형 간극요소(Non-linear Gap Element)와 최적화 기법(Optimization Technique)을 도입하여 유한요소해석 과정에서 요구되는 경계조건(Boundary Condition)의 설정과정을 일반화하였으며, 체결체간의 기밀성 상실 현상을 입증하였다. 변형량과 응력분포로부터 체결체의 강성을 해석하고, 기존의 경험식의 적용범위를 검토하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.268-272
• /
• 2002

A study to determine the structure-borne noise radiated by a dash panel of a real car is performed by using the finite element method (FEM) and the boundary element method (BEM). The radiation efficiency is used to estimate the structure-borne noise radiated by a dash panel. The curved surfaces of a dash panel change the radiation efficiency. Experimental results of radiation efficiency of a simple rectangular plate and a dash panel show good agreements with the simulation results.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권3호
• /
• pp.159-164
• /
• 2000

This paper treats the optimization of rotor construction in the permanent magnet synchronous motor (PMSM) for electric vehicle (EV). While the field system of PMSM has generally one magnet per pole, we replace the magnet into plural sub-magnets. The dimensions of each sub-magnet are determined by the concept of pulse width modulation (PWM). By adopting the proposed rotor construction, we can not only reduce the space harmonics of the air-gap field but also provide space for rotor bars (i.e., damper windings) around the direct-axis. From the investigation by hybrid EE-BE (coupled finite element and boundary element) method coupled with both electric circuit and motion equation, we verify that the construction is effective for practical use.

• 대한조선학회지
• /
• 제22권3호
• /
• pp.9-18
• /
• 1985

The numerical calculation for solving boundary-value problem related to potential flows with a free surface is carried out by application of the localized finite element method. Only forced motion of 2-D body in infinitely deep fluid is considered, although this schemes is equally applicable to any first order time-harmonic problems of similar nature. The infinite domain of the fluid is separated into the inner flow field and the outer flow field with common inter-surface boundary. The finite element method is applied to obtain the solution in the inner flow field and the Green functions are utilized to represent the solution in the outer flow field. At the inter-surface boundary, the continuity of the value of potential and the normal derivative of the potential(i.e. matching condition) is conserved. The present method has better computational efficiency than the previous LFEM and the integral equation method of Frank. This enhanced computational efficiency is presumably due to the fact that the present method gives a symmetric coefficient matrix and requires less computational time in calculating the influence coefficient matrix of Green function than the integral equation method. And the irregular frequency desen't exist because the uniqueness of the solution is assured by the such that the exact free surface condition is satisfied on the boundary of the localized finite element region(i.e. inner region). As an example of the above method, the hydrodynamic forces for the circular cylinder and the rectangular cylinders are calculated. In the computed results, the small number of singularity distribution segments($3{\sim}6$) give good result relative to Ursell's and Vugts'.