• Geomechanics and Engineering
• /
• 제30권2호
• /
• pp.201-210
• /
• 2022

This paper presents a study regarding the influence of various water levels on the characteristics of subgrade mud pumping through a self-developed test instrument. The characteristics of mud pumping are primarily reflected by axial strain, excess pore water pressure, and fine particle migration. The results show that the axial strain increases nonlinearly with an increase in cycles number; however, the increasing rate gradually decreases, thus, an empirical model for calculating the axial strain of the samples is presented. The excess pore water pressure increases rapidly first and then decreases slowly with an increase in cycles number. Furthermore, the dynamic stress within the soil first rapidly decreases and then eventually slows. The results indicate that the axial strain, excess pore water pressure, and the height and weight of the migrated fine particles decrease significantly with a low water level. In this study, when the water level is 50 mm lower than the subgrade soil surface, the issue of subgrade mud pumping no longer exist.

• 한국지반공학회논문집
• /
• 제35권4호
• /
• pp.37-42
• /
• 2019

메탄을 생산하기 위한 하이드레이트 해리시 물과 메탄이 동시에 발생한다. 따라서, 지반 내 이온수의 담수화 및 다상유체의 흐름이 예상되고, 흙입자의 이동 및 막힘에 영향을 주게 된다. 본 연구는 담수화 및 다상유체 흐름이 대표적 세립토인 고령토 입자의 이동 및 막힘에 어떻게 영향을 주는지 규명하고자 한다. 연구 결과는 다음과 같다. (1) 공극의 크기가 커질수록 최소 막힘 발생 농도가 증가한다. (2) 고령토 입자는 소금물보다 담수에서 쉽게 뭉침 및 공극 막힘이 발생한다. (3) 다상유체 흐름 내에서 고령토의 최소 막힘 발생 농도는 단상유체 흐름에 비해 감소한다. 따라서, 하이드레이트로부터 메탄 생산 시, 담수화 및 다상유체의 흐름 발생으로 인해 고령토의 공극 막힘이 쉽게 발생할 수 있고, 이로 인해 투수계수의 저하로 메탄 생산효율의 저하가 예상됨을 설명하였다.

• 한국포장학회지
• /
• 제12권2호
• /
• pp.91-96
• /
• 2006

The widespread use of packaging materials on food packages sometimes causes off-flavor and deterioration in the food by migration of packaging materials which consist of mainly plastic materials and printing ink solvents. Even though migration of the residual packaging materials does not generally cause safety problems in the contained food, it certainly can generate off-flavor and finally deteriorate quality of the finished product. In highly consumer-oriented markets, quality of the finished product is gaining more importance economically, so profound and thorough study about migration into food to maintain the fine quality of the end product becomes an importance issue. Studies have been conducted about migration of various packaging materials and the chemical reactions between the food components and the materials used for food packaging (Brody, 1989; Mcneal and Breder, 1987; Lawson, G and Lawson, C, 1996). Several of these studies have measured partition coefficient values (Kp) between packaging materials and various food samples and involved finding factors that affected the partitioning behavior of packaging materials into the contained food. However, to enable prediction of partitioning, data are still needed on the relation of packaging material chemical structure and properties to partitioning behavior, and on the partitioning behavior of various food ingredients and the total food compositions.

• Geomechanics and Engineering
• /
• 제17권1호
• /
• pp.19-30
• /
• 2019

Recent research on the behavior of silty sand tends to advocate the use of equivalent skeleton void ratio to characterize the density state of this type of soil. This paper presents an investigation to explore the physical meaning of the equivalent skeleton void ratio by means of DEM simulations for assemblies of coarse and fine particles under biaxial shear. The simulations reveal that the distribution pattern of fine particles in the soil skeleton plays a crucial role in the overall macroscopic response: The contractive response observed at the macro scale is mainly caused by the movement of fine particles out of the force chains whereas the dilative response is mainly associated with the migration of fine particles into the force chains. In an assembly of coarse and fine particles, neither all of the fine particles nor all of the coarse ones participate in the force chains to carry the external loads, and therefore a more reasonable definition for equivalent skeleton void ratio is put forward in which a new parameter d is introduced to take into account the fraction of coarse particles absent from the force chains.

• 방사성폐기물학회지
• /
• 제8권3호
• /
• pp.201-205
• /
• 2010

고준위방사성폐기물에서 유출되어 나오는 아이오딘의 이동을 저지하기 위하여 은을 흡착시킨 벤토나이트 블록에 NaI 용액을 흘려주었을 때 대부분의 아이오딘이 흡착되었다. 이 은이온에 의한 아이오딘의 저지 메커니즘을 상세히 조사하기 위하여 아이오딘과 접촉하기 전후의 은이 흡착된 벤토나이트의 X-ray Absorption Near Edge Structure (XANES)와 Extended X-ray Absorption Fine Structure (EXAFS) 스펙트 럼과 표준물질로서 AgO, $Ag_2O$, AgI의 스펙트럼을 비교하였다. 그 결과, 벤토나이트에 흡착되었던 은이 떨어져 나와 AgI 침전 클러스터를 형성함으로서 아이오딘의 이동이 지연되는 것으로 생각된다.

• 열처리공학회지
• /
• 제11권1호
• /
• pp.17-26
• /
• 1998

Cladding of stainless steel on mild steel was prepared by diffusion bonding process. The bond strength increased with an increase of bonding temperature and time. It was also found that the bond strength increased as the surface roughness decreased. After the diffusion bonding of stainless steel-mild steel, the mild steel part near the bonded interface showed higher strength than the base steel due to the migration of chromium and nickel from stainless steel to mild steel. Carbon migration from mild steel gave effect on the formation of chromium carbides at grain boundaries of stainless steel, the fractograpohic features of the imperfectly bonded interface showed rather coarse dimples in the mild steel part and very fine dimples in the stainless steel part.

• Parasites, Hosts and Diseases
• /
• 제42권4호
• /
• pp.151-157
• /
• 2004

Developmental surface ultrastructure of Macroorchis spinulosus was studied by scanning electron microscopy. One-day-old juvenile fluke was leaf-shaped and bent ventrally. Body surface was covered densely with peg-like spines and with cobblestone-like cytoplasmic processes. Ciliated sensory papillae were concentrated around oral sucker. Several unciliated sensory papillae occurred equidistantly on oral sucker and acetabulum. The ciliated papillae appeared in two longitudinal lines symmetric bilaterally on dorsal surface. On adult flukes, tegumantal spines became wider in middle of the body surface. The cytoplasmic processes differentiated into more fine velvety form. It is likely that the differentiated fine cytoplasmic processes are an increased absorptive surface to adult M. spinulosus. It is suggested that single pointed tegumental spines on anterior half of the body may be supportive for this fluke to migration.

• 한국수자원학회논문집
• /
• 제49권1호
• /
• pp.73-81
• /
• 2016

본 연구에서는 식생에 의한 하도 변화와 하상토 분급특성을 파악하였다. 유사의 유출 특성은 불규칙하며, 식생 밀도가 증가함에 따라 유출되는 유사량은 감소하였다. 하상고는 불규칙하게 변하며, 하상토 표층에서 유사 입경은 작아졌다. 식생 밀도가 증가함에 따라 하상 표층에서 무차원 중 앙입경의 비는 감소하였다. 식생대에서 유사가 포착되거나, 식생대와 주흐름 사이에 경계층 흐름이 발생하여 유사가 퇴적되며, 식생대에서 흐름의 방향이 변화되어 표층에서 하상토 입도는 불규칙하게 분포하였다. 무차원 하상토 입경이 감소함에 따라, 차폐효과는 일정하게 감소하였다. 식생밀도가 증가함에 따라 하상 표층에서 차폐효과가 증가하며, 이것은 실험 수로 하류단에서 유사 유출량이 감소하는 것과 일치한다. 식생 밀도가 $0.5stems/cm^2$에서 저수로 이동은 감소하고 안정적인 특성을 보여주었으나, $0.7stems/cm^2$에서 저수로 이동은 증가하였다. 이것은 식생 밀도가 증가하면서 저수로 사행도가 증가하고, 식생대에서 유사가 퇴적되어 새로운 저수로가 형성되었기 때문이다.

• 대한안전경영과학회지
• /
• 제15권1호
• /
• pp.109-120
• /
• 2013

As information-oriented industry has been developed and electronic devices has come to be smaller, lighter, multifunctional, and high speed, the components used to the devices need to be much high density and should have find pattern due to high integration. Also, diverse reliability problems happen as user environment is getting harsher. For this reasons, establishing and securing products and components reliability comes to key factor in company's competitiveness. It makes accelerated test important to check product reliability in fast way. Out of fine pattern failure modes, failure of Electrochemical Migration(ECM) is kind of degradation of insulation resistance by electro-chemical reaction, which it comes to be accelerated by biased voltage in high temperature and high humidity environment. In this thesis, the accelerated life test for failure caused by ECM on fine pattern substrate, $20/20{\mu}m$ pattern width/space applied by Semi Additive Process, was performed, and through this test, the investigation of failure mechanism and the life-time prediction evaluation under actual user environment was implemented. The result of accelerated test has been compared and estimated with life distribution and life stress relatively by using Minitab software and its acceleration rate was also tested. Through estimated weibull distribution, B10 life has been estimated under 95% confidence level of failure data happened in each test conditions. And the life in actual usage environment has been predicted by using generalized Eyring model considering temperature and humidity by developing Arrhenius reaction rate theory, and acceleration factors by test conditions have been calculated.

• 한국항해항만학회지
• /
• 제34권10호
• /
• pp.787-792
• /
• 2010

콘크리트는 물시멘트비에 상응하는 공극을 가지게 되며, 공극을 통한 염소이온의 확산을 평가하기 위하여 해안가 폭로 및 해수 침지실험이 널리 사용된다. 이상의 실험은 경우에 따라서 다년간의 시간을 요하는 경우도 있어, 최근에는 전기 영동법에 기초한 급속 염소이온 확산시험을 실시하는 경우가 많으나, 그 값이 폭로 및 침지 시험에서 얻은 값과 상이한 경우가 많아 데이터의 실용성을 높이기 위하여 그 원인 규명이 절실한 실정이다. 본 연구에서는 평가 방법으로써 Nernst-Einstein의 식을 통한 염화물 이온 이동계수의 산정방법을 사용하였으며, NT BUILD 492법 및 해수 침지실험을 통한 확산 특성과 비교하여 값의 차이에 대하여 고찰하였다. 그 결과 실험인자의 변화가 염소이온 확산에 미치는 영향은 미비한 것으로 평가되어져 실험조건에서 발생하는 영향은 거의 없는 것으로 규명되었으며, NT BUILD 492법과도 거의 동일한 값이 구해졌다. 침지실험 결과와의 상이는 염소이온 확산에서 경계조건의 차이 및 염소이온의 시멘트 수화물과의 고정화에 의한 것으로 판단되어진다.