• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.2
• /
• pp.53-57
• /
• 2002

Recently, digital communication system becomes high speed, as communication demand dose not only increases sharply, but an image, voice various kinds data also comes multimedia. In transmitting data at a high speed, the main problem is fading by multipath. A linear or nonlinear distortion arise In multipath channel fading from ISI(Intersymbol Interference). For restoring this distorted signal, A lot of equalizer and adaptive algorithm is introduced. This paper compares and analysises, for improving communication quality in channel which is long delay spread, performance of decision feedback equalizer by RLS algorithm, a channel estimation by RLS-MLSE and viterbi equalizer Particularly, there Is exactly channel estimation of impluse response and excellent property of equalization about channel, which delay spread is long impluse response comparatively and is property of non-minimun phase.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.253-260
• /
• 2018

The acoustic communication channel in shallow underwater is typically shown as time-varying multipath fading channel characteristics. The received signal through channel transmission cause inter-symbol interference (ISI) owing to multiple components of different time delay and amplitude. To compensate for this, several techniques have been used, and one of them is acoustic equalizer. In this study, we used four equalizers - feed forward equalizer (FFE), decision directed equalizer (DDE), decision feedback equalizer (DFE) and combination DDE with DFE to compensate ISI. And we applied two adaptive algorithms to adjust coefficient of equalizers - normalized least mean square algorithm and recursive least square algorithm. As result, we found that it has a significant performance improvement over 6 dB on SNR in nonlinear equalizer. By combination of DFE and DDE has almost best performance in any case.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1263-1269
• /
• 2012

This paper is the research on the heated CWDM optical transmitter for the wavelength compensation at the low temperature. In general, the wavelength deviation of DFB laser is around 0.1 nm/C. The wavelength of DFB laser shifts to longer(shorter) wavelength according to the temperature increase(decrease). Typical CWDM optical communication network has 20 nm channel spacing from reference center wavelength per each channel. There is some limitation problem in the range of operating temperature due to the channel interference. For solving the limited temperature range problem, especially at the low temperature, we use the heater on the DFB laser. As a result, we could realize the CWDM optical transmitter to meet +/-6.5 nm from reference center wavelength in the range of temperature at $-40{\sim}+85^{\circ}C$, which is applicable to the industrial field.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.172-181
• /
• 2010

In this paper, we propose an adaptive block quantization method. The propose method perfrect reconstructs side information without high complexity in the encoder side, as transmitting motion vectors from a decoder to an encoder side. Also, at the encoder side, residual signals between reconstructed side information and original frame are adaptively quantized to minimize parity bits to be transmitted to the decoder. The proposed method can effectively allocate bits based on bit error rate of side information. Also, we can achieved bit-saving by transmission of parity bits based on the error correction ability of the LDPC channel decoder, because we can know bit error rate and positions of error bit in encoder side. Experimental results show that the proposed algorithm achieves bit-saving by around 66% and delay of feedback channel, compared with the convntional algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5C
• /
• pp.295-301
• /
• 2011

In [1], it has been shown that the energy spreading transform (EST) based iterative equalizer (IE) could enhance its performance by improving the reliability of the decision feedback symbols without the help of the complicated channel decoder. In the matched filter (MF) based IE proposed in [1], however, its feedforward filter (FFF) has been designed in the frequency domain while its feedback filter (FBF) in the time domain. So its complexity increases proportional to the channel memory length. To solve this problem, in this paper, both FFF and FBF are designed in the frequency domain. This enables the proposed frequency domain IE (FD-IE) to achieve the lower complexity over the conventional method in the highly dispersive channel. In addition, simulation results demonstrate that the BER performance of the proposed method is the same as the conventional.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.65-74
• /
• 2012

The QoS guarantee for the forward link in satellite communication networks is very important because there are a variety of packets with multiplexing. Especially, the packets are processed depending on the available bandwidth in satellite network changing the wireless channel state in accordance with weather condition. The DVB-S2 increases the transmission efficiency by applying the adaptive coding and modulation (ACM) techniques as a countermeasure of rain attenuations. However, the channel estimation algorithm is required to support the ACM techniques that select the MODCOD values depending on the feedback data transmitted by RCSTs(Return Channel via Satellite Terminal) because satellite communication networks have a long propagation delay. In this paper, we proposed the channel estimation algorithm using rain attenuation values and reference data and the packet scheduling scheme to support the QoS and fairness. As a result of performance evaluation, we showed that proposed algorithm exactly predicts the channel conditions and supports bandwidth fairness to the individual RCST and guarantees QoS for user traffics.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.8
• /
• pp.375-377
• /
• 2006

An adaptive IIR filter in ANC(Active Noise Control) systems is more effective than an adaptive FIR filter when acoustic feedback exists, in which cause an order of an adaptive FIR filter must be very large if some of poles of the ideal control filter are near the unit circle. But the IIR filters may have stability problems especially when the adaptive algorithm for adaptive filters is not yet converged. In this paper, a stabilized multi-channel recursive LMS (MCRLMS) algorithm for an adaptive multi-channel IIR filter is presented. RLMS algorithms usually diverge before the algorithm is not yet converged. So, in the beginning of the ANC system, the stability of the RLMS algorithms could be improved by pulling the poles of the IIR filter to the center of the unit circle, and returning the poles to their original positions after the filter converges. Computer simulations and experiments for dipole ducts using a TMS320C32 digital signal processor have performed to show the effectiveness of a proposed algorithm.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.30-32
• /
• 2006

An adaptive IIR filter in ANC(Active Noise Control) systems is more effective than an adaptive FIR filter when acoustic feedback exists, in which cause an order of an adaptive FIR filter must be very large if some of poles of the ideal control filter are near the unit circle. But the IIR filters may have stability problems especially when the adaptive algorithm for adaptive filters is not yet converged. In this paper, a stabilized multi-channel recursive LMS (MCRLMS) algorithm for an adaptive multi-channel IIR filter is presented. RLMS algorithms usually diverge before the algorithm is not yet converged. So, in the beginning of the ANC system, the stability of the RLMS algorithms could be Improved by pulling the poles of the IIR filter to the center of the unit circle, and returning the poles to their original positions after the filter converges. Computer simulations and experiments for dipole ducts using a TMS320C32 digital signal processor have performed to show the effectiveness of a proposed algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.5
• /
• pp.1654-1675
• /
• 2014

In practical wireless systems, the erroneous channel state information (CSI) sometimes deteriorates the performance drastically. This paper focuses on robust design of coordinated set planning of coordinated multi-point (CoMP) transmission, with respect to the feedback delay and link error. The non-ideal channel models involving various uncertainty conditions are given. After defining a penalty factor, the robust net ergodic capacity optimization problem is derived, whose variables to be optimized are the number of coordinated base stations (BSs) and the divided area's radius. By the maximum minimum criterion, upper and lower bounds of the robust capacity are investigated. A practical scheme is proposed to determine the optimal number of cooperative BSs. The simulation results indicate that the robust design based on maxmin principle is better than other precoding schemes. The gap between two bounds gets smaller as transmission power increases. Besides, as the large scale fading is higher or the channel is less reliable, the number of the cooperated BSs shall be greater.

• ETRI Journal
• /
• v.44 no.5
• /
• pp.715-732
• /
• 2022

Despite the successful launch of Advanced Television Systems Committee (ATSC) 3.0 broadcasting worldwide, broadcasters are facing obstacles in constructing void-less large-scale single-frequency networks (SFNs). The bottleneck is the absence of decent on-channel repeater (OCR) solutions necessary for SFNs. In the real world, OCRs suffer from the maleficent feedback interference (FI) problem, which overwhelms the desired input signal. Moreover, the undesired multipaths between studio-linked transmitters and the OCR deteriorate the forward signals' quality as well. These problems crucially restrict the feasibility of conventional OCR systems, arousing the strong need for cost-worthy advanced OCR solutions. This paper presents an ATSC 3.0-specific solution of advanced OCR that solves the FI problem and refines the input signal. To this end, the FI canceler and channel equalizer functionalities are carefully implemented into the OCR system. The presented OCR system is designed to be fully compliant with the ATSC 3.0 specifications and performs a fast and efficient signal processing by exploiting the specific frame structure. The real product of ATSC 3.0 OCR is fabricated as well, and its feasibility is verified via field and laboratory experiments. The implemented solution is installed at a commercial on-air site and shown to provide substantial coverage gain in practice.