• Geomechanics and Engineering
• /
• 제14권5호
• /
• pp.459-466
• /
• 2018

By conducting uniaxial loading cycle tests on the coal rock with outburst proneness, the dilatation characteristics at different loading rates were investigated. Under uniaxial loading and unloading, the lateral deformation of coal rock increased obviously before failure, leading to coal dilatation. Moreover, the post-unloading recovery of the lateral deformation was rather small, suggesting the onset of an accelerated failure. As the loading rate increased further, the ratio of the stress at the dilatation critical point to peak-intensity increased gradually, and the pre-peak volumetric deformation decreased with more severe post-peak damage. Based on the laboratory test results, the lateral deformation of the coals at different depths in the #1302 isolated coal pillars, Yangcheng Coal Mine, was monitored using wall rock displacement meter. The field monitoring result indicates that the coal lateral displacement went through various distinct stages: the lateral displacement of the coals at the depth of 2-6 m went through an "initial increase-stabilize-step up-plateau" series. When the coal wall of the working face was 24-18 m away from the measuring point, the coals in this region entered the accelerated failure stage; as the working face continued advancing, the lateral displacement of the coals at the depth over 6 m increased steadily, i.e., the coals in this region were in the stable failure stage.

• 소성∙가공
• /
• 제16권4호
• /
• pp.304-308
• /
• 2007

Failure phenomena in uni-axial tension test were experimentally and numerically investigated for AA6111-T4, AA5083-H18 and DP-Steel, which were friction-stir welded with the same and different thicknesses. Forming limit diagram(FLD) was measured using hemispherical dome stretching tests for base materials and also predicted by Hill's bifurcation and M-K theories for welded areas. Finite element simulations well predicted hardening behaviors, failure locations as well as failure patterns for the uni-axial tension tests especially utilizing very fine meshes and FLD along with stress softening.

• International Journal of Reliability and Applications
• /
• 제18권2호
• /
• pp.21-44
• /
• 2017

Accelerated life tests (ALTs) are frequently used in manufacturing industries to evaluate the reliability of products within a reasonable amount of time and cost. Test units are subjected to elevated stresses which yield quick failures. Most of the previous works on designing ALT plans are focused on tests that involve a single stress. Many times more than one stress factor influence the product's functioning. This paper deals with the design of optimum modified ramp-stress ALT plan for Burr type XII distribution with Type-I censoring under two stress factors, viz., voltage and switching rate each at two levels- low and high. It is assumed that usage time to failure is power law function of switching rate, and voltage increases linearly with time according to modified ramp-stress scheme. The cumulative exposure model is used to incorporate the effect of changing stresses. The optimum plan is devised using D-optimality criterion wherein the ${\log}_{10}$ of the determinant of Fisher information matrix is maximized. The method developed has been explained using a numerical example and sensitivity carried out.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제9권3호
• /
• pp.195-218
• /
• 2009

Wiper motors are used in every automobile. They are exposed to a very diverse environment and consists of several components and, therefore needs careful approach to the enhancement and assessment of reliability of the item. In this article reliability standards for wiper motors are established in terms of quality certification test and failure rate test.

• Nuclear Engineering and Technology
• /
• 제50권8호
• /
• pp.1412-1420
• /
• 2018

An experiment was performed using the large-scale test facility (LSTF), which simulated a 1% vessel upper head small-break loss-of-coolant accident with an accident management (AM) measure under an assumption of total-failure of high-pressure injection (HPI) system in a pressurized water reactor (PWR). In the LSTF test, liquid level in the upper head affected break flow rate. Coolant was manually injected from the HPI system into cold legs as the AM measure when the maximum core exit temperature reached 623 K. The cladding surface temperature largely increased due to late and slow response of the core exit thermocouples. The AM measure was confirmed to be effective for the core cooling. The RELAP5/MOD3.3 code indicated insufficient prediction of primary coolant distribution. The author conducted uncertainty analysis for the LSTF test employing created phenomena identification and ranking table for each component. The author clarified that peak cladding temperature was largely dependent on the combination of multiple uncertain parameters within the defined uncertain ranges.

• Tuberculosis and Respiratory Diseases
• /
• 제43권6호
• /
• pp.862-870
• /
• 1996

Background : Multidrug-resistant tuberculosis(MDR-Tb) has been increased not only in Asia but also in Western society, which may cause public health problems and reduce the efficacy of treatment of tuberculosis. In Western society HIV infection is believed to do a central role in increasing incidence of MDR tuberculosis, but MDR-Tb in Korea may be somewhat different about clinical features, underlying disorders, and prognosis. Goble et al reponed that overall treatment failure rate in MDR-Tb including resistance to isoniazid(INH) and rifampin (RFP) was 44 %. The aim of this study is to find the treatment result in Korea and the factors determining the prognosis. Methods: A retrospective study of pulmonary tuberculosis cultured M. tuberculosis from sputum or bronchial washing fluid between 1986 through 1992 was conducted in the Seoul Paik Hospital, Inje University. We reviewed clinical courses of 141 patients, who had a tuberculosis with resistance to 2 or more drugs including isoniazid(INH) and rifampin(RFP). One hundred and 4 patients of 141 patients had completed treatment and followed up for more than one year. Results: Of 104 (mean age $43.6{\pm}16.7$, M: F=63 : 41) patients with sufficient follow-up data, 73(84.6%) patients responded which is defined as negative Sputum cultures for at least 3 consecutive months. Seven patients(6.7%) had a failure in negative conversion and 9(8.7%) of the patients who initially responded relapsed. Overall treatment failure rate was 15.4%, Patients who were treated for less than 12 months had a higher relapse rate(12.3%) than 18 months(4.9%). And there was a statistically significant correlation between the relapse rate and the number of drugs to which isolates wera resistant(p<0.05). Conclusion : The treatment failure rate of MDR-Tb in Korea was lower than previous studies in western Country and the major determining factor of prognosis was the number of resistant drugs to M. tuberculosis at drug sensitivity test. For reducing the relapse rate, we recommend more than 12 months of treatment for MDR tuberculosis.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권2호
• /
• pp.129-136
• /
• 2014

Reliability test is focusing to detect the unexpected reliability failure and solve them for the high quality of products. The test data should be used to assess and project the current level of interesting product reliability and so it is very important to have the accurately assessing methodology with test data. There are two type of trend for test data as constant and changing one during testing and this paper shows the difference in the assessing results of these two cases. There is less information how to define the existence of reliability growth rate changing and calculate the parameters of the reliability growth models to make an accurate assessment with such condition, so i established the process and mathematical model to calculate the parameters at such condition to make reliability growth curve with high Goodness of Fit. I validated the new method with the data made from Monte Carlo Simulation and case from Demko (1993). Even the assessed result with the new methodology may be different with the case by case because of very diversity in test condition and testing product quality, but the process and method founded in this research can be applied to any case using Duane and AMSAA model for their test data assessment. I also present the evaluation method to see the effectiveness with new one which is a conventional knowledge and not popular to use, so it is possible to compare the results with the newly presented and conventional method for better business decision.

• 대한인간공학회지
• /
• 제26권4호
• /
• pp.65-73
• /
• 2007

This study evaluated the short message service (SMS) and multimedia message service (MMS) usability of mobile phones and wireless internet services by performance failure rates and flowcharts that adopted the concept of state diagrams. Forty-eight participants who had an experience of using mobile phones were recruited by posting an advertisement on websites for the experiment. They carried out both SMS and MMS tasks with the mobile phones of LG Cyon and Samsung Anycall as well as the wireless internet services of LGT ez-i, KTF magicN, and SKT NATE. In general, Cyon had the lower performance failure rate than Anycall for SMS, and ez-i had the lowest performance failure rate than the other services for MMS. More specifically through the workflow analysis, most participants used hot keys to take 7-8 steps to send a SMS including a symbol and had a difficulty in typing the symbol. They also took 10-11 steps to send a MMS after taking and attaching two pictures. Anycall, magicN, and NATE had significantly large error and failure rates due to the limited option of the menu paths that users could take and poor compatibilities of menu names and between menu and navigation keys. This study showed the possibility of use of flowcharts for systematic and specific usability evaluation methods and found the causes of performance errors and failures with mobile phones and wireless internet services to provide insight into their design.

• 대한기계학회논문집
• /
• 제8권2호
• /
• pp.97-103
• /
• 1984

본 연구에서는 이에 주목하고 잔존하는 잔유응력을 제거한 상태에서 PWHT가 용접 HAZ조직의 파괴인성에 어떠한 영향을 미치고 있느가와 잔유응력이 잔존된 상태에 서의 PWHT 유대시간과 가열속도가 파괴인성에 어떠한 영향을 미치는가를 알아보기 위 하여 공시재에 무응력과 일정응력을 가한 상태에서 유대시간과 가열속도를 변화시켜가 며 PWHT를 실족한 후 소성굽힘에 의한 COD파괴인성 시험 등을 통하여 PWHT의 영향을 검토하였다.

• Steel and Composite Structures
• /
• 제34권6호
• /
• pp.877-889
• /
• 2020

This work features the outcomes of an empirical investigation into the characteristics of steel reinforced grout (SRG) composite - concrete interfaces. The parameters varied were loading rate, densities of steel fibres and types of load displacement responses or measurements (slip and machine grips). The following observations and results were derived from standard single-lap shear tests. Interfacial debonding of SRG - concrete joints is a function of both fracture of matrix along the bond interface and slippage of fibre. A change in the loading rate results in a variation in peak load (P_max) and the correlative stress (σ_max), slip and machine grips readings at measured peak load. Further analysis of load responses revealed that the behaviour of load responses is shaped by loading rate, fibre density as well as load response measurement variable. Notably, the out-of-plane displacement at peak load increased with increments in load rates and were independent of specimen fibre densities.