• Journal of Forest and Environmental Science
• /
• 제30권1호
• /
• pp.71-75
• /
• 2014

Forest roads failure is one of the most common problems caused by heavy rainfalls. This study investigated the characteristics on stabilization measures installed for cutting slopes failure of forest road resulted from heavy rainfalls. Three primary factors (slope length, slope gradient, soil type) affecting cutting slope failure were considered and stabilization measures were classified into two types (A type: wooden fence, vegetation sandbag, stone masonry; B type: wire cylinder, gabion, concrete retaining wall) through discriminant analysis based on their capacity of resistance to slope failure. Results showed that A type was mainly installed in such conditions as cut slope <8 m, cut slope gradient $30-40^{\circ}$ and soil type with soil while B type occurred in locational conditions as cut slope length >8 m, cut slope gradient < $30^{\circ}$ and > $30^{\circ}$, and soil type of gravelly soil and rock.

• 대한토목학회논문집
• /
• 제14권3호
• /
• pp.583-594
• /
• 1994

자연사면 붕괴의 주요인의 하나는 연약층에서의 간극수압 상승이다. 따라서 이 연약층내의 간극수압 계측이 중요하다. 본 연구는 피압지하수위, 풍화암반 파쇄대의 투수성 그리고 연약층의 풍화정도를 고려한 간극수압 계측의 실내모형 실험이다. 제3기층 붕괴형과 붕괴성 붕괴형의 모형으로 피압지하수 상태에서 filter의 투수성에 따른 연약층내에서의 간극공기압 및 간극수압의 반응을 측정하였다. 간극압의 반응양상에 있어서 제3기층 붕괴형은 시간 변화에 따라 반응양상이 계단형(step type)으로 나타났고 붕괴성 붕괴형은 파형(wave type)으로 나타났다. 간극수압 반응율은 제3기층 붕괴형이 붕괴성 붕괴형보다 크며, 연약층의 풍화도의 증가에 따라 간극수압 반응율은 감소하였다.

• Communications for Statistical Applications and Methods
• /
• 제21권1호
• /
• pp.93-103
• /
• 2014

This paper deals with the problem of predicting censored data in a half triangle distribution with an unknown parameter based on progressively Type-II censored samples. We derive maximum likelihood predictors and some approximate maximum likelihood predictors of censored failure times in a progressively Type-II censoring scheme. In addition, we construct the shortest-length predictive intervals for censored failure times. Finally, Monte Carlo simulations are used to assess the validity of the proposed methods.

• 대한산업공학회지
• /
• 제29권2호
• /
• pp.145-149
• /
• 2003

We consider the estimation of failure rate and acceleration factor under type-I censoring without using acceleration model when testing is conducted in only one highly accelerated condition. Failure times of an item are assumed to be exponentially distributed. It is also assumed that the uncertainty about the acceleration factor, the failure time contraction ratio between accelerated condition and use condition, can be modeled by the uniform or gamma prior distribution of appropriate parameters. We respectively use Bayes and maximum likelihood approaches to estimate acceleration factor and failure rate in the use condition. An example is given to show how the method can be applied.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.30-31
• /
• 2015

High velocity impact of projectile generate local failure such as penetration, scabbing, perforation on concrete. It has been reported that local failure is affected by such as nose shape, mass of projectile. In this study, comparing and weighing the impact failure properties of concrete by high velocity impact test that using spherical nose and flat nose type projectile. As a result, It was considered that scabbing of Flat nose projectile reduced more than spherical nose projectile by dispersion of impact force.

• 시스템엔지니어링학술지
• /
• 제10권1호
• /
• pp.43-48
• /
• 2014

The door system for railway vehicles is the critical device directly influences on safety and satisfaction of passengers, Recently, electrical type of passenger door system is widely used for EMU type train instead of pneumatic type of passenger door system. The estimation of MTBF and failure rates for electrical type door system is essential. The manufacturor simply provides intrinsic reliability data for the railway operator. But actual reliability data based on operation and maintenance data is not complying with intrinsic reliability. In this study, operation and failure data associated with electrical door system were analyzed in order to determine actual MTBF and failure data. Intrinsic reliability data and service reliability data were studied to finallize much more practical and reliable actual reliability. Relax 2011 was used to predict intrinsic reliability and 217Plus model was also used to estimate of actual reliability data based on field data. Furthermore, it is necessary to keep studying on reliability prediction methodology and applying it in the field and doing research on improvement of reliability through feedback as well.

• 디지털산업정보학회논문지
• /
• 제10권4호
• /
• pp.19-27
• /
• 2014

Software reliability in the software development process is an important issue. Software process improvement helps in finishing with reliable software product. Infinite failure NHPP software reliability models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, proposes the reliability model with log type mean value function (Musa-Okumoto and log power model), which made out efficiency application for software reliability. Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on mean square error (MSE) and coefficient of determination($R^2$), for the sake of efficient model, was employed. Analysis of failure using real data set for the sake of proposing log type mean value function was employed. This analysis of failure data compared with log type mean value function. In order to insurance for the reliability of data, Laplace trend test was employed. In this study, the log type model is also efficient in terms of reliability because it (the coefficient of determination is 70% or more) in the field of the conventional model can be used as an alternative could be confirmed. From this paper, software developers have to consider the growth model by prior knowledge of the software to identify failure modes which can be able to help.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권7호
• /
• pp.1092-1100
• /
• 2004

This paper describes the application of fault tree technique to analyze of compressor failure. Fault tree analysis technique involves the decomposition of a system into the specific form of fault tree where certain basic events lead to a specified top event which signifies the total failure of the system. In this research. fault trees for failure analysis of screw type air compressor are made. This fault trees are used to obtain minimal cut sets from system failure and system failure rate for the top event occurrence can be calculated. It is Possible to estimate air compressor reliability by using constructed fault trees through compressor failure example. It is Proved that FTA is efficient to investigate the compressor failure modes and diagnose system.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.527-534
• /
• 2000

136 cut slopes which extends from Namyangju to Chunchon city along the 46th national highway were investigated to analyze the influence factors affecting slope instability. Geologic and geotechnical conditions were examined and the detailed investigation were carried out for fifty five failed slopes. failure mode (wedge failure, planar failure, circular failure, sheet eroison and rock falls) are examined with respect to slope inclination, rock type, weathering grade and discontinuity patterns. It is suggested that the failure modes and their dimensions have relations to the morphology and geologic conditions of the slopes. Wedge failure has highest is the most frequent failure mode and falls, sheet erosions, planar failures and circular in descending order of failure percentage. Wedge failure is most dominant failure type over all lithology except quartzite formation. In slopes of well foliated and banded gneiss, failure ratio of wedge is up to 50% ca. Failure ratio(number of rock fall/number of total failure) of rock fall increases with increase fo slope inclinations and decrease of weathering grade. Dimension analyses of failed slopes shows wedge and circular failure has higher value of D/L and D/H than planar failure and sheet erosion.

• Communications for Statistical Applications and Methods
• /
• 제23권1호
• /
• pp.57-70
• /
• 2016

Type-II progressive censoring is one of the censoring methods frequently used in clinical studies, reliability trials, quality control of products and industrial experiments. Sometimes in Type-II progressive censoring experiments, the failure rate is low so the waiting time to observe the $m^{th}$ failure will be very long; however, the experimenter may have to terminate the experiment before a predetermined time. In this article, if two generalized types of Type-II progressive censoring are reminded, we then make some changes in the removal method of Type-II progressive censoring such that without reducing the deduction quality, the termination time of the experiment decreases. This can be done with decreasing withdraws throughout the steps of the experiment with a special reasonable method. A simulation study is done and the results are tabulated at the end of this article for a comparison between introduced method and Type-II progressive censoring.