• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.48-49
• /
• 2008

본 실험에서는 대향 타겟식 스퍼터링 (face target sputtering, FTS) 장비를 사용하여 플렉서블 디스플레이용 poly ethylene naphthalate (PEN) 플라스틱 기판 위에 보호층으로 사용된 $ZrO_2$ 박막의 특성들에 대해 연구하였다. FTS에 의해 3 시간동안 증착된 $ZrO_2$ 박막의 기판 온도는 $69^{\circ}C$ 로 낮은 증착 온도를 나타내었으며, 이는 유리전이온도가 낮은 PEN 과 같은 플라스틱 기판위에 박막 증착시 적용하기에 적합하다. 제작된 $ZrO_2$ 박막에서 기판 중심으로부터 거리의 함수로 측정된 박막의 두께 차이는 약 4.5%로 매우 균일한 두께를 갖는 것으로 측정되었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.336-336
• /
• 2010

Ga doped ZnO (GZO) transparent conductive films were deposited on the glass substrates at room temperature by facing target sputtering (FTS) method. The sputtering targets were 100 mm diameter disks of GZO($Ga_2O_3$ 3.w.t%) and Zn metal. The GZO thin films were deposited as a various $PO_2$ (oxygen gas content). Base pressure was $2{\times}10^{-6}$torr, and a working pressure was 1mTorr. The properties of thin films on the electrical and optical properties of the deposited films were investigated by using a four-point probe, a Hall Effect measurement and an UV/VIS spectrometer. The minimum resistivity of film was $6.5{\times}10^{-4}$[$\Omega$-cm] and the average transmittance of over 80% was seen in the visible range.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.169-169
• /
• 2012

현재 디스플레이 시장은 LCD (Liquid Crystal Display), PDP (Plasma Display Panel) 등과 같이 평판 디스플레이가 주류를 이루고 있으며 현재에는 기존의 디스플레이와는 달리 잘 휘어지고 높은 투과성을 가지는 플렉시블 디스플레이에 대한 연구가 활발히 진행 중이다. 하지만 이러한 플렉시블 디스플레이에 사용되는 플라스틱 기판의 경우 용제에 대한 화학적 저항성 및 기계적인 안정성이 취약한 점과 대기중의 수분이나 산소가 플라스틱 기판을 통하여 소자내로 침투하게 되어 금속전극을 산화시키거나 기포 또는 흑점 등과 같은 비 발광 영역이 확산되어 소자의 수명을 단축시키는 치명적인 단점을 가진다. 이에 본 실험에서는 고밀도 플라즈마 형성이 가능하고 저온공정이 가능한 FTS (Facing Target Sputtering) 장비를 이용하여 Polyethylene terephthalate (PET) 기판위에 낮은 수분 투과율 또는 산소 투과율을 갖는 양질의 무기 산화막을 적층하기 위해 저 투습도 및 기계적인 경도 향상을 위한 비 반응성 박막으로 $Al_20_3$층을 Ar분위기에서 증착하였고 그 위에 박막의 stress 감소, 유연성 향상을 위한 반응성 박막으로 Al을 Ar과 $O_2$를 비율별로 증착하여 비교 실험하였다. 이와 같이 제작된 무기산화막들을 Uv- spectrophotometer를 이용하여 광학적 특성을 조사한 결과 가시광 영역에서 모두 80% 이상의 높은 투과율을 나타내었으며, 그 외 XRD (X-ray Diffraction)를 사용하여 결정성을 확인, SEM (Scanning Electron Microscope), AFM (Atomic Force Microscope)을 이용하여 박막의 구조와 표면향상 및 표면조도를 측정한 결과 모든 박막에서 밀집도가 좋으며 거칠기가 작은 것으로 확인되었다. 마지막으로 수분 투과율(WVTR)을 알아보기 위해 Mocon (Permatran W3/31)장비를 이용하여 측정한 결과 $1.0{\sim}3.0{\times}10^{-3}g/m{\cdot}day$의 낮은 수분 투과율을 볼 수 있었다. 이러한 측정 결과로 볼 때 향후 FTS 장비를 이용하여 양질의 플라즈마를 형성하여 알루미늄 무기산화막을 이용한 고밀도 다층막을 형성하면 더욱 낮은 수분투과율을 갖는 가스차단막을 제작할 수 있을 것으로 보여지며 반도체 소자 및 디바이스의 Pachaging으로도 사용가능 할 것이라 사료된다. 본 연구는 한국산업기술진흥원에서 지원하는 2011년도 지역산업기술개발사업의 연구수행으로 인한 결과물임을 밝힙니다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.137-137
• /
• 2009

Indium Gallium Zinc Oxide (IGZO) thin films for TFT channel were prepared by using a Facing Target Sputtering (FTS) system. To investigate the effect of oxygen on the optical and the electrical properties of amorphous InGaZnO(a-IGZO), we prepared thin films by FTS system in various oxygen atmospheres at room temperature. As-deposited IZTO thin films were investigated by using a UV/VIS spectrometer, an X-ray diffractometer, a Hall Effect measurement system, and an atomic force microscope. The quantitative analysis of the films was carried out by using the energy dispersive X-ray (EDX) technique for the as-deposited film.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.69-70
• /
• 2007

FTS(Facing Target Sputtering) 장치를 이용하여 polyethylene terephthalate (PET) 필름 위에 ITO(Indium Tin Oxide) 박막을 성장시키고 이들의 광학적, 구조적 특성을 조사하였다. 막 두께는 150 nm로 고정하였고, 인가적력과 산소 가스 유량비를 변수로 박막을 합성 하였다. 그 결과 80 % 이상의 광투과율과 Rms 26.8 nm 값을 갖는 ITO / PET 박막을 합성하였다.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.09a
• /
• pp.106-109
• /
• 2005

The ITO thin films for Top-Emitting Organic Light Emitting Devices (TOLEDs) were prepared on cell(LiF/Organic Layer/Bottom Electrode : ITO ) by FTS (Facing Targets Sputtering) system under different sputtering conditions which were varying gas pressure, input current and distance of target to target($D_{T-T}$). As a function of sputtering conditions, I-V characteristics of prepared ITO thin films on cell were measured by 4156A (HP). In the results, when the In thin films were deposited at $D_{T-T}$ 70mm and working pressure 1mTorr, the leakage current of ITO/cell was about 11[V] and 5E-6[$mA/cm^2$].

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.203-204
• /
• 2009

The Indium Zinc Tin Oxide (IZTO) thin films for flexible display electrode were deposited on poly carbonate (PC) and polyethersulfone(PES) and glass substrates at room temperature by facing targets sputtering (FTS). Two different kinds of targets were installed on FTS system. One is ITO ($In_2O_3$ 90 wt.%, $SnO_2$ 10 wt.%), the other is IZO ($In_2O_3$ 90 wt.%, ZnO 10 wt.%). As-deposited IZTO thin films were investigated by a UV/VIS spectrometer, an X-ray diffractometer (XRD), an atomic force microscope (AFM) and a Hall Effect measurement system. As a result, we could prepare the IZTO thin films with the resistivity of under $10^{-4}\;[{\Omega}{\cdot}cm]$ and IZTO thin films deposited on glass substrate showed an average transmittance over 80% in visible range (400~800 nm) in all IZTO thin films except in IZTO thin film deposited at $O_2$ gas flow rate of 0.1[sccm].

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.228-230
• /
• 1994

A Spotter ion Plating(SIP) system with a r. f. coil electrode and the Facing Target Sputter(FTS) source was designed for high-quality thin film formation. The rf discharge was combined with DC facing target sputtering in order to enhance ionization degree of a sputtered atoms. The discharge voltage-discharge characteristics curves of a FTS source could be characterized by the fern of $I{\propto}V^n$ with n in the range of $8{\sim}12$. The energy of ions incident on the substrate depended on the sheath potential of DC biased substrate. The mean impact ion energy increased with negative bias voltage and rf power. The adhesive force of the TiN film formed was in the range of $30{\sim}50N$, and markedly influenced by substrate bias voltage.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.463-466
• /
• 2001

This detailed study of electrical, crystallographic and optical properties in Al doped ZnO thin films prepared by Facing Targets Sputtering(FTS), where strong internal magnets were contained in target holders to confine the plasma between the targets is described. Optimal transmittance and resistivity was obtained by controlling flow ratio of O$_2$gas. When the O$_2$ gas ratio of 0.25 and substrate temperature R.T., ZnO:Al thin film deposited had strongly oriented c-axis and the lower resistivity ( <10$\^$-4/ $\Omega$cm). The optical transmittance was above 80% in visible range.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.525-528
• /
• 2001

ZnO:Al thin film can be used as a transparent conducting oxide(TCO) which has low electric resistivity and high optical transmittance for the front electrode of amorphous silicon solar cells and display devices. This study of electrical, crystallographic and optical properties of Al doped ZnO thin films prepared by Facing Targets Sputtering (FTS), where strong internal magnets were contained in target holders to confine the plasma between the targets, is described. Optimal transmittance and resistivity was obtained by controlling flow rate of O$_2$ gas and substrate temperature. When the of gas rate of 0.3 and substrate temperature 200$^{\circ}C$ , ZnO:Al thin film had strongly oriented c-axis and lower resistivity(<10$\^$-4/Ω-cm).