• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.34 no.1
• /
• pp.11-19
• /
• 2024

The increased utilization of the FFT in signal processing, cryptography, and various other fields has highlighted the importance of optimization. In this paper, we propose the implementation of an accelerator that processes the radix-2 16 points FFT algorithm more rapidly and efficiently than FFT implementation of existing studies, using FPGA(Field Programmable Gate Array) hardware. Leveraging the hardware advantages of FPGA, such as parallel processing and pipelining, we design and implement the FFT logic in the PL (Programmable Logic) part using the Verilog language. We implement the FFT using only the Zynq processor in the PS (Processing System) part, and compare the computation times of the implementation in the PL and PS part. Additionally, we demonstrate the efficiency of our implementation in terms of computation time and resource usage, in comparison with related works.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.9 no.6
• /
• pp.634-643
• /
• 1999

This paper concerns an implementation of f~rry logic controller (FLC') on a reconfigurahle FP

• Journal of Information Processing Systems
• /
• v.15 no.4
• /
• pp.890-903
• /
• 2019

The single carrier frequency domain equalization (SC-FDE) technology is an important part of the broadband wireless access communication system, which can effectively combat the frequency selective fading in the wireless channel. In SC-FDE communication system, the accuracy of timing synchronization directly affects the performance of the SC-FDE system. In this paper, on the basis of Schmidl timing synchronization algorithm a timing synchronization algorithm suitable for FPGA (field programmable gate array) implementation is proposed. In the FPGA implementation of the timing synchronization algorithm, the sliding window accumulation, quantization processing and amplitude reduction techniques are adopted to reduce the complexity in the implementation of FPGA. The simulation results show that the algorithm can effectively realize the timing synchronization function under the condition of reducing computational complexity and hardware overhead.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.235-238
• /
• 2002

This paper presents a way of a novel FPGA implementation of DCT. It shows how to limit the required bits on each DCT processing step, instead of implementing high-cost 64-bit floating-point arithmetic of IEEE Std 754-1985 on FPGA. ID-DCT implementation has been done which operates at 30 frame per second with 1920${\times}$1080 resolution.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.4
• /
• pp.288-295
• /
• 2010

Multi-level inverters have drawn much of attention in recent years because it can meet the demand of high power applications and good power quality associated with reduced harmonic distortion. As the number of voltage level increases, field programmable gate arrays (FPGAs) are suitable for the implementation of multi-level modulation algorithm. This paper proposes the implementation method for generating PWM pulses at the three phase diode clamped five-level inverter using FPGA. The strategy for communicating stably the data of three-phase reference voltages between the DSP and FPGA is suggested. The techniques for generating PWM signals based on a multi-carrier modulation method are carried out through the experiments with 32-bit DSP and Cyclone-III FPGA.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.1
• /
• pp.54-59
• /
• 2002

In the three-axis control of satellites by using on-board actuators, gyros are usually used to measure the attitude angles and angular rates. The gyros are operated by electronic parts and mechanical actuators. The digital components of the electronic parts consist of largely FPGA (Field Programmable Gate Array) as one of the methods for VLSI(Very Large Scale Integrated) circuit design, while the mechanical parts provide output signal directly by mechanical actuation of a spinning rotor. In this research, a mixed mode of gyro is implemented in FGA. In addition to the hardware implementation, the simulation study was conducted by using the SABER for the mixed mode simulator. Results for the practical implementation of the satellite ACS (Attitude Control System) interfaced with the data processing are also presented to validate the FPGA implementation.

• Journal of information and communication convergence engineering
• /
• v.13 no.3
• /
• pp.145-151
• /
• 2015

We describe in this paper a hardware-based improvement scheme of a real-time automatic speech recognition (ASR) system with respect to speed by designing a parallel feature extraction algorithm on a Field-Programmable Gate Array (FPGA). A computationally intensive block in the algorithm is identified implemented in hardware logic on the FPGA. One such block is mel-frequency cepstrum coefficient (MFCC) algorithm used for feature extraction process. We demonstrate that the FPGA platform may perform efficient feature extraction computation in the speech recognition system as compared to the generalpurpose CPU including the ARM processor. The Xilinx Zynq-7000 System on Chip (SoC) platform is used for the MFCC implementation. From this implementation described in this paper, we confirmed that the FPGA platform is approximately 500× faster than a sequential CPU implementation and 60× faster than a sequential ARM implementation. We thus verified that a parallelized and optimized MFCC architecture on the FPGA platform may significantly improve the execution time of an ASR system, compared to the CPU and ARM platforms.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.2
• /
• pp.131-138
• /
• 2011

The previous FPGA cluster systems for a brute force search of DES keyspace have showed cost efficient performance, but the research on optimized implementation of the DES algorithm on a single FPGA has been insufficient. In this paper, the optimized DES implementation for a single FPGA of the commercial FPGA cluster system with 77 Xilinx Virtex5-LX50 FPGAs is proposed. Design space exploration using the number of pipeline stages in a DES core, the number of DES cores and the maximum clock frequency of a DES core is performed which leads to integrating 16 DES cores running at 333MHz. Also low power design is applied to reduce the loss of performance caused by limitation of power supply on each FPGA which results in fitting 8 DES cores running at 333MHz. When the proposed DES implementations would be used in the FPGA cluster system, it is estimated that the DES key would be found at most 2.03 days and 4.06 days respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12C
• /
• pp.727-737
• /
• 2011

This paper presents an implementation scheme of real-time lane and vehicle detection system with FPGA and DSP. In this type of implementation, defining the functionality of each device in efficient manner is of crucial importance. The FPGA is in charge of extracting features from input image sequences in reduced form, and the features are provided to the DSP so that tracking lanes and vehicles are performed based on them. In addition, a way of seamless interconnection between those devices is presented. The experimental results show that the system is able to process at least 15 frames per second for video image sequences with size of $640{\times}480$.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.171-174
• /
• 2002

This paper presents an implementation method of phasor measurement device, which is based on the FPGA implementation of the sliding-DFT The design is verified by the timing simulation of its operation. The error effect of coefficient approximation and frequency deviation in the recursive implementation of the sliding-DFT is analytically derived and verified with the computer simulations.