• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.4
• /
• pp.467-475
• /
• 2016

Ultrasonic propagation imaging (UPI) has shown great potential for detection of impairments in complex structures and can be used in wide range of non-destructive evaluation and structural health monitoring applications. The software implementation of such algorithms showed a tendency in time-consumption with increment in scan area because the processor shares its resources with a number of programs running at the same time. This issue was addressed by using field programmable gate arrays (FPGA) that is a dedicated processing solution and used for high speed signal processing algorithms. For this purpose, we need an independent and flexible block of logic which can be used with continuously evolvable hardware based on FPGA. In this paper, we developed an FPGA-based ultrasonic propagation imaging system, where FPGA functions for both data acquisition system and real-time ultrasonic signal processing. The developed UPI system using FPGA board provides better cost-effectiveness and resolution than digitizers, and much faster signal processing time than CPU which was tested using basic ultrasonic propagation algorithms such as ultrasonic wave propagation imaging and multi-directional adjacent wave subtraction. Finally, a comparison of results for processing time between a CPU-based UPI system and the novel FPGA-based system were presented to justify the objective of this research.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5465-5470
• /
• 2012

FPGA(Field Programmable Gate Array) devices are widely used due to their merits in circuit development time, and development cost. Among various FPGA technologies, SRAM-based FPGAs have large cell capacity so that they are attractive for complex circuit design and their reconfigurability. However, they are weak in space environment where radiation energy particles cause Single Event Upset(SEU). In this paper, we designed a controller supervising SRAM-based FPGA to protect configuration memory inside. The controller is implemented on an Anti-Fusing FPGA. Radiation test was performed on the implemented computer board and the result show that our controller provides better SEU-resilience than TMR-only system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.655-658
• /
• 2016

Xilinx 7-Series FPGA(Field Programmable Gate Array)s mainly used for the implementation of high-performance digital circuit have SRAM-type configuration memory and can malfunction when soft errors occur in their configuration memory. SEM(Soft Error Mitigation Controller) offered by Xilinx helps users mitigate the influence of soft errors in configuration memory. When soft errors occur, SEM Controller can recover the state of FPGA through partial reconfiguration if the soft errors are correctable by ECC(Error Correction Code) and CRC(Cyclic Redundancy Code). This paper presents the availability analysis of Xilinx 7-Series FPGAs against soft errors under the protection of the SEM Controller. Availability functions are derived and compared according to the correction capability of the SEM Controller. The result may help to estimate the reliability of SRAM-based FPGA running in an environment where soft errors may occur.

• Journal of Broadcast Engineering
• /
• v.18 no.5
• /
• pp.669-679
• /
• 2013

This paper proposed a new VLSI (Very Large Scale Integrated Circuit) architecture for stereo matching in real time. We minimized the amount of calculation and the number of memory accesses through analyzing calculation of stereo matching. From this, we proposed a new stereo matching calculating cell and a new hardware architecture by expanding it in parallel, which concurrently calculates cost function for all pixels in a search range. After expanding it, we proposed a new hardware architecture to calculate cost function for 2-dimensional region. The implemented hardware can be operated with minimum 250Mhz clock frequence in FPGA (Field Programmable Gate Array) environment, and has the performance of 805fps in case of the search range of 64 pixels and the image size of $640{\times}480$.

• Convergence Security Journal
• /
• v.17 no.2
• /
• pp.41-51
• /
• 2017

The explosive increase in the range of Internet usage gradually makes the speed and capacity of network high-speed, rapidly evolving it into mass storage. Accordingly, network equipment such as switch and router are coping with it through hardware-based rapid technological evolution, but as the technological development of the most basic and essential network security system in the hyper-connected society requires frequent alterations and updates about the security issues and signatures of tens of thousands, so it is not easy to overcome the technical limitations based on the software. In this paper, to improve problems in installing and operating such anti-DDoS devices, we propose a Hi-DPI algorithm best reflecting the hardware characteristics and parallel processing characteristics of FPGA (Field Programmable Gate Array), and would verify the practicality.

• Journal of Power Electronics
• /
• v.14 no.3
• /
• pp.488-498
• /
• 2014

This paper presents an implementation of selective harmonic elimination (SHE) modulation for a single-phase 13-level transistor-clamped H-bridge (TCHB) based cascaded multilevel inverter. To determine the optimum switching angle of the SHE equations, the Newton-Raphson method is used in solving the transcendental equation describing the fundamental and harmonic components. The proposed SHE scheme used the relationship between the angles and a sinusoidal reference waveform based on voltage-angle equal criteria. The proposed SHE scheme is evaluated through simulation and experimental results. The digital modulator based-SHE scheme using a field-programmable gate array (FPGA) is described and has been implemented on an Altera DE2 board. The proposed SHE is efficient in eliminating the $3^{rd}$, $5^{th}$, $7^{th}$, $9^{th}$ and $11^{th}$ order harmonics, which validates the analytical results. From the results, it can be seen that the adopted 13-level inverter produces a higher quality with a better harmonic profile and sinusoidal shape of the stepped output waveform.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.156-164
• /
• 2014

In a delay line type of a time-to-digital converter implemented in Field Programmable Gate Array, the timing accuracy decreases for a longer carry chain. In this paper, we propose a structure that has a multi-phase clock and a state machine to check metastability; this would reduce the required length of the carry chain with the same time resolution. To reduce the errors caused by the time difference in the four delay lines associated with a four-phase clock, the proposed TDC generates a single input pulse from four phase clocks and uses a single delay line. Moreover, the state machine is designed to find the phase clock that is used to generate the single input pulse and determine the metastable state without a synchronizer. With the measurement range of 1 ms, the measured resolution was 22 ps, and the non-linearity was 25 ps.

• Journal of Internet of Things and Convergence
• /
• v.6 no.1
• /
• pp.97-102
• /
• 2020

Multi-Channel Switch ICs for IoT have integrated several solid state structure low ON-resistance bi-directional relay MOS switches with level shifter to drive high voltage and they should be independently controlled by external serialized logic control. These devices are designed for using in applications requiring high-voltage switching control by low-voltage control signals, such as medical ultra-sound imaging, ink-jet printer control, bare board open/short and leakage test system using Kelvin 4-terminal measurement method. This paper describes implementation of analog switch control block and its verification using Field programmable Gate Array (FPGA) test pattern generation. Each block has been implemented using Verilog hardware description language then simulated by Modelsim and prototyped in a FPGA board. Compare to conventional IC, The proposed architecture can be applied to fields where multiple entities need to be controlled simultaneously in the IoT environment and the proposed pattern generation method can be applied to test similar types of ICs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.7
• /
• pp.822-828
• /
• 2019

An Augmented Reality(AR) provides virtual information with a real environment, and the processor needs to access the memory for the AR system. However, the processor has the heavy workload as the technology improvement leads to increase the size of data. We need a specific module to reduce the workload to overcome the limitation. In this paper, we propose a Direct Memory Access(DMA) controller displaying image instead of the processor. We implemented the proposed DMA controller on a Field Programmable Gate Array(FPGA) and demonstrated the functionality of the DMA controller based on an Avalon Memory Mapped(Avalon-MM) interface. Also, the DMA controller is fabricated by using Magnachip/Hynix 0.35um CMOS technology and verified the feasibility of the embedded system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.84.5-84
• /
• 2002

In order to be a stand-alone structure, a biped robot should be designed of the effective mechanic structure and the smaller hardware system. This paper shows the design methodology of a biped robot controller using FPGA(Field Programmable Gate Array). A hardware system consists of DSP(Digital Signal Processor) as the main CPU and FPGA as the motor controller...