• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.771-776
• /
• 2014

In this paper, an agile programmable chirp spread spectrum generator for wideband frequency-jamming applications from 20 MHz to 3 GHz is proposed. A frequency-mixing architecture using two voltage-controlled oscillators is used to achieve a wideband operating frequency range, and the direct digital synthesizer (DDS)-based chirping method with a two-point modulation technique is employed to provide a programmable and consistent chirp bandwidth. The proposed signal generator provides the various programmable FM signals from 20 MHz to 3 GHz with a modulation bandwidth from 0 to 400 MHz. The prototype successfully demonstrates arbitrary sequential jamming operation with a fast band-to-band hopping time of < 10 ${\mu}sec$.

• Journal of Biomedical Engineering Research
• /
• v.21 no.5
• /
• pp.513-517
• /
• 2000

In this study, we fabricated the advanced telemetry system that transmitting media use radio frequency(RF) for the middle range measurement of the physiological signals and receiving media use optical for electromagnetic interference problem. The telemetry system within a size of 65$\times$125$\times$45mm consists of three parts: a RF transmitter, a optical receiver and a physiological signal processing CMOS one chip. Advantages of proposed telemetry system is wireless middle range(50m) FM transmission, reduce electromagnetic interference to a minimum which enables a comfortable bed-side telemetry system.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.1
• /
• pp.8-14
• /
• 1999

The active devices used at microwave frequency have the different phase shift according to input power. Especially, The difference of the phase shift is large in the saturation region of the amplifier. In this paper, we disigned the phase control system for fixing the different phase shift at device. With the high frequency nonlinear amplifier, we fabricated such system that the phase shift to be fixed automatically using the varible phase shifter. The variable phase shifter fixed total phase variation of the circuit using the information that was obtained from the comparison of imputsignal phase with output signal phase. Even though the input signal is 2-tone or FM type, we could estimate and also fix the phase variation on DUT Dynamic range is about 10dB. It has been experimented at 1960MHz using Teflon (H=31mil, ${\varepsilon}r$=3.2)

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.27-32
• /
• 2008

In the signals-shadowed areas, In order to providing the suitable signals reception level repeaters are used for relay the signals. Repeater receives the weak signals and amplifies it up to required power level, The amplified signals get radiated by the various methods. Both antenna distribution and LCX(Leakage Coaxial Cable) are typical methods in the repeater and BTS signals radiation. Their applications are depended on the environment condition and frequency band. Generally the antenna distribution are used for the mobile telecommunication networks which use the higher frequency band than 500MHz. On the other side, LCX distribution is suitable to the frequency band under 500MHz. The network plan of repeater in FM, T-DMB, Fire Radio and Internal subway communication network are the typical LCX application fields. Cell planning with repeaters are based on the free space loss, LCX connection loss and actual field data. The actual field data can be the most important factor to design the network planning.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.61-66
• /
• 2012

We propose a traffic information service system for which traffic data are transmitted over vehicle ad-hoc network from neighbor vehicles, and eventually provided to the traffic information center through a few gateway vehicles which are capable of inter-working with the infrastructure network like 3G. The center broadcasts the traffic information through the FM radio. The proposed scheme allows collecting and analyzing traffic status of large areas without incorporating separated monitoring systems, e.g., probe cars and enables to provide accurate traffic information to drivers in timely manner. We also evaluate its performance by ns-3 simulation.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.835-840
• /
• 2023

RFID(Radio Frequency Identification) systems are attracting attention as a key component of Internet of Things technology due to the cost and energy efficiency of application services. In order to use RFID technology in the IoT application service field, it is necessary to be able to store and manage various information for a long period of time as well as simple recognition between the reader and tag of the RFID system. And in order to read and write information to tags, a performance improvement technology that is strong and reliable in poor wireless channels is needed. In particular, in the UHF(Ultra High Frequency) RFID system, since multiple tags communicate passively in a crowded environment, it is essential to improve the recognition rate and transmission speed of individual tags. In this paper, Middleton's Class A impulsive noise model was selected to analyze the performance of the RFID system in an impulsive noise environment, and FM0 encoding and Miller encoding were applied to the tag to analyze the error rate performance of the RFID system. As a result of analyzing the performance of the RFID system in Middleton's Class A impulsive noise channel, it was found that the larger the Gaussian noise to impulsive noise power ratio and the impulsive noise index, the more similar the characteristics to the Gaussian noise channel.

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.122-129
• /
• 2020

Surion is required to install radios (U/VHF-AM, VHF-FM) capable of omni-directional communication. Therefore, this paper demonstrates the antenna performance test for the installation of the Surion communication antenna and the selection of optimal location. A simulation pattern analysis was performed employing the antenna, and a coupling test was performed by creating a new evaluation criterion. In addition, the results of the pattern flight test conducted at the previously suggested 1:20 turn and separation distance ratio were observed to be normal. However, the occurrence of voice cutoff was noted in the long-distance flight test. Therefore, in this paper, 1:300 (15 NM) is proposed as a new optimal ratio for predicting the long-distance flight test results in advance. Finally, the effectiveness of the proposed evaluation criteria was verified through long-distance flight tests. Consequently, it is expected to reduce the development schedule and cost by reducing the trial and error of the performance test for the Surion model. Also, the results of this study are expected to be used as standards for the installation of communication antenna and quality tests for other helicopters.

• Archives of design research
• /
• v.12 no.4
• /
• pp.201-209
• /
• 1999

Feb. 11. 1997, Korean Government announced FM Radio Broadcasting and TV Terrestrial TV Broadcasting will be changed to digital format in year 2001, and all Korean Broadcasting except AM Radio and Microwave will be changed to digital format before 2010. In spite of IMF economic crisis, the Digitizing is the one of the hot issue in TV Broadcasting area. The narrow view of the Digitizing the Broadcasting is a technical development from the analogue to digital, but the extended view of it means not only the technical development but the revolution in the concept of TV and service area, relationship between sender and receiver, structure of TV Industry. Thus Digitizing the Broadcasting shifts paradigm and eventually it cause a big change in the advertising creative. The digital TV could be a very encouraging technical development for the consumers convenience because of the multiple choice in the channels and interactive services which leads us to the multimedia service through the TV . On the other hand, multimedia and multi-channel, interactivity implicate a big uncertainty and risk, This research paper is about the technical aspects and social aspects of digital TV and its influence of the marketing and TV advertising creative.

• The KIPS Transactions:PartC
• /
• v.8C no.5
• /
• pp.517-524
• /
• 2001

There are cases that revoke the certification because of disclosure of private key, deprivation of qualification and the expiration of a term of validity based on PKI. So, a user have to confirm the public key whether valid or invalid in the certification. There are many method such as CRL, Delta-CRL, OCSP for the cert-validation of certification. But these method many problems which are overload traffic on network and the CRL server because of processing for cert-validation of certification. In this paper we proposed the realtime cert-validation of certification method which solved problems that are data integrity by different time between transmission and receiving for CRL, and overload traffic on network and the CRL server based on DARC.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.6
• /
• pp.791-802
• /
• 2001

In this paper, DARC(Data Radio Channel) error correction decoder for the U Subcarrier Broadcasting System is designed of using (272,190)$\times$(272,190) product code based on (272,190) shortened difference set cyclic code. This decoder has error flag of column and row direction that can store the result of the error correction of column and row direction in the block and frame structure, is designed to be of no benefit the output with majority logic determination to cancel the corrected and determined bit, and can improve by using the error correction method that no error correction of the row direction is performed, if error correction of the column direction is completely performed by error flag.