• Journal of Welding and Joining
• /
• 제28권1호
• /
• pp.100-106
• /
• 2010

In this paper crack propagation analyses in the dissimilar metal weldment of a nozzle were performed using a finite element alternating method (FEAM). A two-dimensional axisymmetric finite element nozzle model was prepared and welding simulation including the thermal heat transfer analysis and the thermal stress analysis was performed. Initial cracks were inserted at weld and heat affected zone in the finite element model which has welding residual stress distribution obtained from the welding simulation. To calculate crack propagation trajectories of these cracks, a new fatigue crack evaluation module was developed in addition to the previous FEAM program. With the new FEAM fatigue crack evaluation module, crack propagation trajectory and crack growth time were calculated automatically and effectively.

• 한국도로학회논문집
• /
• 제8권2호
• /
• pp.23-30
• /
• 2006

상온아스팔트 혼합물은 생산공정이나 시공 중에 naphtha나 kerosene을 사용하는 컷백 아스팔트와 같이 환경오염물질을 생성하지 않고 골재와 아스팔트 바인더를 가열하지 않기 때문에 가열아스팔트 혼합물에 비하여 환경친화적이며 경제적이다. 그러나 일반적으로 상온아스팔트 혼합물은 가열아스팔트 혼합물에 비해 내구성이나 수분민감성에서 미흡한 점이 많다. 본 연구에서는 상온아스팔트의 수분민감성과 내구성을 증진시킬 수 있는 섬유보강 상온아스팔트 혼합물(FEAM)에 대한 평가를 하였다. 최적 유화아스팔트량(OEC), 최적함수량(OWC) 그리고 최적 섬유보강제 첨가량(OFC)를 결정하기 위해서 마샬배합설계를 수정 개발하였다. 최적의 섬유보강 상온아스팔트 혼합물과 일반 상온아스팔트 혼합물을 제작하여 마샬안정도 시험, 간접인장강도 시험 및 회복탄성계수 시험을 실시하였고 그 결과를 가열아스팔트 혼합물의 결과와 비교하였다. 결과로 FEAM과 EAM 모두 마샬배합설계 기준으로 중간 교통량에 충분한 것으로 판명되었다. 또한 섬유보강에 의하여 일반 상온아스팔트 혼합물의 수분민감성과 내구성이 증진하는 효과도 얻을 수 있는 것으로 판명되었다

• Journal of Welding and Joining
• /
• 제29권2호
• /
• pp.64-71
• /
• 2011

In this paper, crack propagation analyses in the inner diameter (ID) repair weld of the dissimilar metal weldment of a nozzle were performed using a finite element alternating method (FEAM). To calculate the theoretical solution for the crack tip stress intensity factor, a weak type singular integral equation consisted of crack surface traction and dislocation density function was constructed and solved in conjunction with the FEAM. A two-dimensional axisymmetric finite element nozzle model was prepared and ID repair welding was simulated. An initial crack, 10% depth of weld thickness, was assumed and crack propagation trajectory from the initial crack to the 75% depth of thickness was calculated using the FEAM. Crack growth versus time curve was also calculated and compared with the curves obtained from ASME code method. With the method constructed in this paper, crack propagation trajectory and crack growth time were calculated automatically and effectively.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.969-980
• /
• 2003

The interactions between curved cracks are examined in an orthotropic plate and the effects of rectilinear anisotropy on the stress intensity factors are analyzed. The finite element alternating method (FEAM) is used in this study to get the stress intensity factors for the multiple curved cracks. To obtain analytical solutions, which is necessary in FEAM, the curved cracks are modeled as continuous distributions of dislocations, and integral equations are formulated for unknown dislocation density functions to satisfy the given resultant forces on the crack surfaces. Several basic problems are solved to verify the accuracy and efficiency of the proposed method and it can be found that present results show good agreements with the previously published results.

• 한국시뮬레이션학회논문지
• /
• 제20권3호
• /
• pp.11-18
• /
• 2011

한국 육군은 K-9자주포용 탄약보급 장비로 K-10 탄약운반 장갑차를 운용하고 있으며, K-55 자주포용 탄약운반 장갑차의 전력화를 검토하고 있다. K-55용 탄약운반 장갑차는 현재 시제장비로 개발 된 상태로, 이 장비의 전력화 여부 및 소요대수를 결정하기 위해서는 사전에 이 장비의 운용효과를 분석할 필요가 있다. 이에 본 연구에서는 시뮬레이션을 이용하여 K-55용 탄약 운반장갑차의 운용효과를 제시하였다. 시뮬레이션 모델은 육군의 화포 편성 및 기타 포병무기체계 작전계획 분석 등을 위해 사용되는 워게임 모델인 화력운용분석모델을 활용하였다. 화력운용분석모델 모의결과에 따른 K-55 자주포용 탄약운반차의 운용효과는 탄약운반장갑차의 전력화 여부에 대한 의사 결정에 활용할 수 있을 것이라 판단된다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.853-854
• /
• 2005

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.859-864
• /
• 2001

For earthquake resistance design, a response modification factor is used to reduce the design strength and it reflects ductility, reserve strength, redundancy and damping effect. But this factor has not theoretical basis. In this study, two response modification factors are compared and analyzed for shear wall apartment building.; the one is introduced by ATC-19 Procedures, the other is suggested FEMA-273 and ATC-40 through nonlinear static analysis. For the results, ATC-19 procedure gives a reasonable estimation to R factor. But $R_{u}$ by using FEAM-273 and ATC-40 methods is estimated so small in case of a minor or moderate earthquake region. Due to this fact, response modification factor is smaller than suggested load criterion 3.0. So, it needs to decrease wall volume and reduce the global strength and system stiffness for proper ductile behavior matching to domestic load criterion.

• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.982-990
• /
• 2000

The finite element alternating method is extended further for general three dimensional cracks in an isotropic body subjected to the mode I loading. The required analytical solution for a dime dimensional crack in an infinite isotropic body is obtained by solving the integral equations. In order to remove the high singularity in integration, the technique suggested by Keat et al. was used. With the proposed method several example problems are solved in order to check the accuracy and efficiency of the method.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 추계학술발표대회 개요집
• /
• pp.38-40
• /
• 2005

Fracture mechanics evaluation of stress corrosion cracking (SCC) in the dissimilar metal weld (DMW) for the nuclear piping system is performed; simulating the transition joint of the ferritic nozzle to austenitic safe-end fabricated with the Inconel Alloy A82/182 buttering and welds. Residual stresses in the DMW are computed by the finite element (FE) analyses Then, to investigate the SCC in the weld root under the combined residual and system operation stresses, the fracture mechanics parameters for a semi-elliptical surface crack are evaluated using the finite element alternating method (FEAM). As a result, it is found that the effect of weld residual stresses on the crack-driving forces is dominant, as high as three times or more than the operation stresses.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.278-283
• /
• 2004

Many analysis methods, including finite element method, have been suggested and used for assessing the integrity of cracked structures. In the paper, in order to analyze arbitrarily shaped three dimensional cracks in an infinite body, the finite element alternating method is extended. The cracks are modeled as a distribution of displacement discontinuities by the displacement discontinuity method and the symmetric Galerkin boundary element method. Applied the proposed method to several example problems for planner cracks in finite bodies, the accuracy and efficiency of the method were demonstrated.