• 한국정보통신학회논문지
• /
• 제11권11호
• /
• pp.2090-2094
• /
• 2007

박막음향공진기(FBAR) 기술은 현재의 실리콘 공정기술과 높은 집적화 가능성으로 인하여 차세대 RF 필터를 제작할 수 있는 매우 희망적인 기술로 최근에 큰 관심을 불러 일으켜 왔다. RF 필터는 기본적으로 여러 개의 FBAR 소자들을 직렬과 병렬로 연결된 형태로 구성되므로 그 필터의 특성은 각각의 FBAR 소자의 특성에 크게 의존하게 된다. 따라서 우수한 품질의 FBAR 소자를 제작하기 위해서는 우선적으로 소자 및 공정의 최적화 설계가 중요한다. 이러한 최적화 설계는 FBAR 소자 특성을 크게 향상 시킬 수 있게 되고, 궁극적으로 우수한 성능을 가진 FBAR 필터의 구현으로 이어지게 된다. 본 논문에서는, 이러한 FBAR 소자의 공진특성을 더욱 효과적으로 향상시킬 수 있는 방법들에 관한 연구결과를 고찰하고 논의한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.204-207
• /
• 2007

Film bulk acoustic wave resonator (FBAR) technology has attracted a great attention as a promising technology to fabricate the next-generation RF filters mainly because the FBAR technology can be integrated with current Si processing. The RF filters are basically composed of several FBAR devices connected in parallel and in series, and their characteristics depend highly on the FBAR device characteristics. Thus, it is important to design high quality FBAR devices by device or process optimization. This kind of effort may enhance the FBAR device characteristics, eventually leading to FBAR filters of high performance. In this paper, we describe the methods to more effectively improve the resonance characteristics of the FBAR devices.

• 한국정보통신학회논문지
• /
• 제7권2호
• /
• pp.250-254
• /
• 2003

본 논문에서는 2GHz 대역 RF 대역통과 필터 응용을 위한 FBAR 소자에 대한 연구를 발표한다. 본 연구의 FBAR 소자는 크게 상부 및 하부 전극 사이에 압전체(AlN)가 삽입되어 있는 공진부와 SiO2/W이 여러층으로 적층되어 있는 음향반사층 두 부분으로 구성되어 있다. RF sputtering 방법으로 증착된 AlN 박막은 c축이 기판에 수직한 정도가 우수한 c축 우선 배향성을 갖는다. 이때 결정립(grain)은 길고 얇은 주상형(columnar)을 보인다. 뿐만아니라, 우수한 품질계수(4300)와 반사손실(37.19 dB)도 얻어졌다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.703-706
• /
• 2002

Piezoelectric thin film such as ZnO and AlN can be applicable to FBAR (Film Bulk Acoustic Resonator) device of thin film type and FBAR can be applicable to MMIC. The characteristic of FBAR device is variable according to the deposition conditions of piezoelectric thin film when preparation of thin film by sputtering method. In this study, we prepared ZnO thin film for FBAR using Facing Targets Sputtering apparatus which can be deposited fine Quality thin film because temperature increase of substrate due to the bombardment of high-energy particles can be restrained. And crystalline and c-axis preferred orientation of ZnO thin film with deposition conditions was investigated by XRD.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 영호남 학술대회 논문집
• /
• pp.94-97
• /
• 2003

This study uses ZnO thin film as a piezoelectric material and Pt as bottom electrode for FBAR (film bulk acoustic resonator) device. ZnO thin film and Pt were deposited by RF-magnetron sputtering method. ZnO thin film and Pt were oriented to c-axis. Top electrode Al was deposited by thermal evaporation. The membrane was formed of bulk micromachining. The FBAR was evaluated by XRD, SEM and electrical characterization. The resonant frequency was measured by HP 8753C Network Analyzer. A fabricated FBAR device exhibited a resonant frequency of 700 MHz ~ 1.5 GHz. When bottom electrode and top electrode thickness were fixed, the resonant frequency was increased as decreasing ZnO thin film thickness.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권7호
• /
• pp.308-314
• /
• 2005

The 2 GHz film bulk acoustic wave resonator(FBAR), one of the most necessary device of the next generation mobile communication system, consisted of solidly mounted resonator(SMR) structure using Brags reflector, was researched in this paper The FBAR applied SiO$_{2}$ and W had large difference of the acoustic impedance to reflector Al to electrode and ZnO to piezoelectric layer. Specially, the FBAR applied the two-step deposition method to improve the c-axis orientation and increase reproducibility of the fabrication device had good performance. The electrical properties of plasma such as impedance, resistance, reactance, $V_{pp},\;I{pp}$, VSWR and phase difference of voltage and current, was analyzed and measured by RF sensor with the variable experiment process factors such as gas ratio, RF power and base vacuum level about concerning the thickness, c-axis orientation, adhesion and roughness. The FBAR device about the optimum condition resulted reflection loss(S$_{11}$) of -17 dB, resonance frequency of 1.93 GHz, electric-mechanical coefficient(k$_{eff}$) of 2.38 $\%$ and Qualify factor of 580. It was seen better qualify than the common dielectric filter at present and expected on business to the filter device of 2 GHz bandwidth with the MMIC technology.

• Journal of information and communication convergence engineering
• /
• 제3권3호
• /
• pp.131-136
• /
• 2005

The effects of the deposition temperature on the growth characteristics of the ZnO films were studied for film bulk acoustic wave resonator (FBAR) device applications. All films were deposited using a radio frequency (RF) magnetron sputtering technique. It was found that the growth characteristics of the ZnO films have a strong dependence on the deposition temperature from 25 to $350^{\circ}C$. The ZnO films deposited below $200^{\circ}C$ exhibited reasonably good columnar grain structures with a highly preferred c-axis orientation while those above 200°C showed very poor columnar grain structures with a mixed-axis orientation. This study seems very useful for the future FBAR device applications.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.196-199
• /
• 2007

In this paper, we studied a ZnO-based film bulk acoustic wave resonator (FBAR) device fabricated on top of a novel multi-layered Bragg reflector with chromium adhesion layers $(0.03{\mu}m-thick)$ inserted. The performance of FBAR device could be significantly improved using proper thermal treatments. At ${\sim}2.75$ GHz, we could achieve good return loss and quality factor (Q). This device fabrication technique will be useful for the future mobile WiMAX applications.

• 한국정보통신학회논문지
• /
• 제16권5호
• /
• pp.1029-1034
• /
• 2012

본 논문에서는 US-PCS(US-personal communications services)를 위해 사용이 가능한 저가격 고성능 FBAR (film bulk acoustic resonator) 듀플렉서(duplexer) 모듈(module)을 제시하였다. FBAR 소자는 일반적인 실리콘(Si) 기반의 공정보다 가격경쟁력이 우수한 유리(glass) 웨이퍼 기반의 패키지를 개발하여 적용하였다. FBAR 듀플렉서 모듈의 전송단(Tx)과 수신단(Rx)에서 얻어진 최대 삽입손실 특성은 각각 1.9 dB와 2.4 dB이다. 전송단 및 수신단 FBAR 소자와 본딩(bonding)된 유리 기반의 웨이퍼 및 PCB 기판과 몰딩(molding) 물질을 모두 포함하는 FBAR 듀플렉서 모듈의 전체 두께는 1.2 mm이다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.61-65
• /
• 2008

In this paper, we studied a ZnO-based film bulk acoustic resonator (FBAR) device fabricated on a specially designed multi-layerd Bragg reflector part. Very thin chromium adhesion layers (0,03um thick) were additionally deposited to improve the quality of the Bragg reflector and some thermal treatments were performed to improve the resonant characteristics of the device. At the operating frequency of ${\sim}2.7GHz$, excellent resonant characteristics were observed in terms of return loss and quality factor, and effective electromechanical coupling coefficient. These findings are expected to be highly promising and effective for improving the performance of the FBAR devices at high frequency.