• Journal of Korean Neurosurgical Society
• /
• v.38 no.2
• /
• pp.89-95
• /
• 2005

Objective : The purpose of this study is to analyze aneurysm morphology and define limitations and feasibility in endovascular Gugliemi detachable coil[GDC] embolization for anterior communicating artery [ACoA] aneurysms. Methods : From January 2000 through October 2003, 123patients were treated with endovascular coil embolization for ACoA aneurysms. There were 75women and 48men, with a mean age of 63years. All ruptured aneurysms were treated within 15days of rupture. Aneurysm morphology was classified according to neck size and projection of aneurysm dome as follows-A : neck of aneurysm <4mm & anterior projection, B : neck of aneurysm [4mm & anterior projection, C : neck of aneurysm<4mm & posterior [superior] projection, D : neck of aneurysm [4mm & posterior [superior] projection, E : neck of aneurysm<4mm & inferior projection, and F : neck of aneurysm [4mm & inferior projection. Endovascular procedures were categorized as either "successful" or "unsuccessful". Clinical follow-up was estimated at discharge and at 6months, post treatment results were classified according to Glasgow Outcome Scale[GOS]. Results : Successful embolization for ACoA was performed in 86patients of 123patients [69.9%]. Complete or near complete aneurysm occlusion was observed in 102patients [82.9%]; a neck remnant was observed in 6patients [4.9%]; partial embolization was done in 3patients [2.4%]; and embolization was attempted in 12patients [9.8%]. Among 55patients with follow-up angiographic results, 18patients [32.7%] were defined as recanalization of the aneurysm sac. Morphological analysis demonstrated that anterior projecting aneurysms and morphological classifications [morphological classifications worsens [A - D] chances of successful coil occlusion significantly decrease] were major factors in successful embolization, and, inferiorly projecting and wide neck [${\ge}4mm$] aneurysms are highly related to recanalization of aneurysms. Conclusion : Endovascular coil embolization of ACoA aneurysms shows good outcome in our study. Nevertheless, there is a limitation in the endovascular approach to ACoA, even though advanced modern techniques evolve rapidly. Compensatory surgical approach with the endovascular approach is required for successful treatment of ACoA aneurysms.

• 연구논문집
• /
• s.25
• /
• pp.115-120
• /
• 1995

The aim of this project is the development of technology of production of micro mechanical parts. Materials are Cr, pt or film (thickness $1000-3000\AA$) on glass substrate. Method of manufacturing is resistless direct laser ablation based on the projection technology. A source of radiation is KrF excimer laser(248nm), Experiments of threshold energy are carried out and the results are analyzed by SEM.

• Journal of the Chungcheong Mathematical Society
• /
• v.19 no.3
• /
• pp.213-218
• /
• 2006

The 2D g-Navier-Stokes equations are a certain modified Navier-Stokes equations and have the following form, $$\frac{{\partial}u}{{\partial}t}-{\nu}{\Delta}u+(u{\cdot}{\nabla})u+{\nabla}p=f$$, in ${\Omega}$ with the continuity equation ${\nabla}{\cdot}(gu)=0$, in ${\Omega}$, where g is a suitable smooth real valued function. In this paper, we will derive 2D g-Navier-Stokes equations from 3D Navier-Stokes equations. In addition, we will see the relationship between two equations.

• Honam Mathematical Journal
• /
• v.24 no.1
• /
• pp.9-23
• /
• 2002

For a closed densely defined linear operator T on a Hilbert space H, let ${\prod}$ denote the function which corresponds to T, the orthogonal projection from $H{\oplus}H$ onto the graph of T. We extend some ordinary norm ineqralites comparing ${\parallel}{\Pi}(A)-{\Pi}(B){\parallel}$ and ${\parallel}A-B{\parallel}$ to the Schatten p-norm where A and B are bounded operators on H.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.2
• /
• pp.581-591
• /
• 2015

Let $\mathcal{A}$ be a factor von Neumann algebra with dimension greater than 1. We prove that if a linear map ${\delta}:\mathcal{A}{\rightarrow}\mathcal{A}$ satisfies $${\delta}([[a,b],c])=[[{\delta}(a),b],c]+[[a,{\delta}(b),c]+[[a,b],{\delta}(c)]$$ for any $a,b,c{\in}\mathcal{A}$ with ab = 0 (resp. ab = P, where P is a fixed nontrivial projection of $\mathcal{A}$), then there exist an operator $T{\in}\mathcal{A}$ and a linear map $f:\mathcal{A}{\rightarrow}\mathbb{C}I$ vanishing at every second commutator [[a, b], c] with ab = 0 (resp. ab = P) such that ${\delta}(a)=aT-Ta+f(a)$ for any $a{\in}\mathcal{A}$.

• Bulletin of the Korean Mathematical Society
• /
• v.54 no.4
• /
• pp.1111-1122
• /
• 2017

In this work, we consider constacyclic and cyclic self-dual codes over the rings $R_k$. We start with theoretical existence results for constacyclic and cyclic self-dual codes of any length over $R_k$ and then construct cyclic self-dual codes over $R_1={\mathbb{F}}_2+u{\mathbb{F}}_2$ of even lengths from lifts of binary cyclic self-dual codes. We classify all free cyclic self-dual codes over $R_1$ of even lengths for which non-trivial such codes exist. In particular we demonstrate that our constructions provide a counter example to a claim made by Batoul et al. in [1] and we explain why their claim fails.

• Honam Mathematical Journal
• /
• v.29 no.1
• /
• pp.55-60
• /
• 2007

Given operators X and Y acting on a Hilbert space $\cal{H}$, an interpolating operator is a bounded operator A such that AX = Y. In this article, we showed the following : Let $\cal{L}$ be a subspace lattice acting on a Hilbert space $\cal{H}$ and let X and Y be operators in $\cal{B}(\cal{H})$. Let P be the projection onto $\bar{rangeX}$. If FE = EF for every $E\in\cal{L}$, then the following are equivalent: (1) $sup\{{{\parallel}E^{\perp}Yf\parallel\atop \parallel{E}^{\perp}Xf\parallel}\;:\;f{\in}\cal{H},\;E\in\cal{L}\}\$ < $\infty$, $\bar{range\;Y}\subset\bar{range\;X}$, and < Xf, Yg >=< Yf,Xg > for any f and g in $\cal{H}$. (2) There exists a self-adjoint operator A in Alg$\cal{L}$ such that AX = Y.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.269-274
• /
• 1999

As the semiconductor industry enters the next century, we are facing to the technological changes and challenges. Optical lithography has driven by the miniaturisation of semiconductor devices and has been accompanied by an increase in wafer productivity and performance through the reduction of the IC image geometries. In the last decade, DRAM(Dynamic Random Access Memories) have been quadrupoling in level of integration every two years. Korean chip makers have been produced the memory devices, mainly DRAM, which are the driving force of IC＇s(Integrated Circuits) development and are the technology indicator for advanced manufacturing. Therefore, Korean chip makers have an important position to predict and lead the patterning technology. In this paper, we will be discussed the limitations of the optical lithography, such as KrF and ArF. And, post optical lithography technology, such as E-beam lithography, EUV and E-beam Projection Lithography shall be introduced.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.2
• /
• pp.197-202
• /
• 2002

In this paper, we want to help understanding about telecentric as introducing the concept of the system and researching the optical properties after we choose the designed profile projection lens. An analyzed optical system is F-number=2.8 and the first lens is used negative lens. Accordingly, we can know this system is compacter, because the front focal position is to the inside of the system and aperture stop is designed to the inside of the optical system. The field is about $21^{\circ}$. Since the entrance pupil is located the front focal point, we can certify the exit pupil is -49404.1mm, located on the infinite toward the object space. Therefore, the optical system is the form of 'image space telecentricity'.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.4
• /
• pp.414-418
• /
• 2016

In this paper, a hardware architecture of low area gradient magnitude calculator is proposed. For the hardware complexity reduction, the characteristic of orthogonal projection vector and hardware resource sharing technique are applied. The proposed hardware architecture can be implemented without degradation of the gradient magnitude data quality since the proposed hardware is implemented with original algorithm. The FPGA implementation result shows the 15% of logic elements and 38% embedded multiplier savings compared with previous work using Altera Cyclone VI (EP4CE115F29C7N) FPGA and Quartus II v15.0 environment.