• Child Health Nursing Research
• /
• v.12 no.2
• /
• pp.253-259
• /
• 2006

Purposes: Venipuncture is one of the most painful and frequently performed invasive procedure for children by nurses. The purpose of this study was to investigate the effect of EMLA cream(eutectic mixture of local anesthetics: 2.5% lidocaine and 2.5% prilocaine) to decrease venipuncture related pain and anxiety in children. Methods: A randomized, double blinded, placebo-controlled study was conducted. Sixty children scheduled venipuncture were recruited, and randomly allocated to receive either EMLA or a placebo cream 1 hour before venipuncture. Venipuncture was carried out by one nurse investigator. Pain and anxiety was measured by parent, nurse investigator, and nurse observer. Results: Pain in the EMLA group was significantly lower than that of placebo group. However, there was no significant difference in anxiety score between the EMLA and placebo groups. Local side effect of EMLA cream were negligible. Conclusions: EMLA cream was found to be an effective local anesthetic for pediatric venipuncture pain. Further studies should continue to evaluate the facilitators and barriers of EMLA cream application in pediatric nursing practice.

• Child Health Nursing Research
• /
• v.22 no.1
• /
• pp.21-28
• /
• 2016

Purpose: The purpose of this study was to identify effects of EMLA (Eutectic Mixture of Local Anesthetics) cream application on pain perception and pain response during insertion of implanted venous access port needle in children with cancer. Methods: From December 2010 to August 2011, at U university hospital, 20 patients scheduled for implanted venous access port needle insertion were recruited, and randomly assigned to receive either EMLA or a placebo cream 1 hour before the implanted venous access port needle insertion. While conducting needle insertion, changes in pulse and oxygen saturation on the pulse oxymeter monitor were measured and pain behavior reaction was also measured during needle insertion in the treatment room. After conducting needle insertion, self-reported pain reaction, and mothers' perception of the children's pain reaction were measured. Collected data were statistically processed using SPSS version 17.0 for Windows, and analyzed using descriptive statistics, t-test. Results: Children's self-reported degree of pain, degree of pain as perceived by mothers and pain behavior reaction decreased significantly in the EMLA application group compared with the placebo group. Conclusion: Findings indicate that application of EMLA cream is effective in relieving pain in these children during implanted venous access port needle insertion.

• Journal of the Korean Ceramic Society
• /
• v.20 no.4
• /
• pp.305-314
• /
• 1983

In order to enhance the rate of th nitridation and to give the high density of reaction-bonded silicon nitride MgO powder as nitriding aid were added to silicon powders and the mixture was pressed isostatically into compacts which were nitrided in the furnace of 1, 35$0^{\circ}C$ where 95% $N_2$-5% $H_2$ gases were flowing. As the other nitriding aid $Mg(NO_3)_2 6H_2O$ was selected, A slip made of magnesium nitrate solution and fine silicon particles was spray-dried and then decomposed at 30$0^{\circ}C$. Magnesium oxide-coated silicon powders were formed into compacts prior to the nitridation on the same condition as the former. Magnesium nitrate (MgO, produced from the decomposition of magnesium nitrate) was more effective for the formation of the $\beta$-phase in the initial stage of the nitridation probably due to the easy formation of $MgO-SiO_2$-metal oxide eutectic melt. It has been confirmed that forsterite was formed as a result of the reaction between MgO and $SiO_2$ film of silicon surface. It was considered that MgO produced from magnesium nitrate may be finer more reactive and more uniformly distributed on the surface of silicon particles than original MgO. The higher the forming pressure was the more the $\beta$-phase was formed.

• Journal of the Korean Ceramic Society
• /
• v.44 no.9
• /
• pp.517-523
• /
• 2007

For the preparation of tricalciumaluminate $(C_3A)$ clinker, in traditional clinkering method using oxides and carbonates as a raw material, uneconomical repetition of burning have been necessary to avoid the melting of clinker by eutectic reaction in the system $CaO-Al_2O_3$. In this study, special starting raw materials for the clinker burning were prepared from a mixture of oyster shell and aluminium hydroxide by heating to $1100^{\circ}C$ and hydrating at $30^{\circ}C$. The starting raw materials, hardened body with weak hydraulic strength, were mainly composed of $C_3AH_6$ formed by resolution-precipitation mechanism of the system $CaO-Al_2O_3-H_2O$. By heating them, relatively pure $C_3A$ clinker could be obtained by one-time burning at the fairly lower temperature than that of conventional method. The easier formation of $C_3A$ clinker seemed to be caused by higher compositional homogeneity and stoichiometry of the starting materials, high surface area and crystallographic instability of the thermally decomposed products, and the catalytic effect of decomposed moisture on the early-stage crystallization of calciumaluminates. The basic hydration behavior of the clinker was also confirmed.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.18 no.1
• /
• pp.46-53
• /
• 2011

Purpose: The purpose of this study was to identify the effects of EMLA cream (eutectic mixture of local anesthetics, lidocaine and prilocaine) on pain during ampicillin sodium intradermal (ID) skin test, and also to assess skin reaction after the skin test. Methods: Forty-three nurse-volunteers had skin tests with 0.01ml-0.05ml ampicillin sodium antibiotics. Skin tests were done on each forearm to compare the pain level of the skin test site after application of EMLA cream with the pain level when no EMLA cream was applied. EMLA cream was applied at the ID skin test site with an occlusive dressing for one hour. Pain was evaluated using a visual analogue scale and pain sensation using the short form McGill Pain Questionnaire. The transverse diameter of the wheal and redness was read right after and at 15 minutes after the skin test. The results were compared using independent t-tests. Results: Pain score and sensation with EMLA cream treatment were significantly lower than when EMLA cream was not applied. There was no difference in skin reactions; reading of the skin test was not affected by EMLA cream. Conclusions: EMLA cream was found to be an effective local anesthetic to relieve the pain of clients having ampicillin sodium antibiotics ID skin tests.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.587-590
• /
• 2013

Solid-liquid equilibria for mixtures composed of n-vinyl-2-pyrrolidone (NVP) and 2-pyrrolidone were measured as a basic study for the melt crystallization process to remove 2-pyrrolidone as impurity included in NVP. A differential scanning calorimeter (DSC) and a crystallizer were used and the experimental results obtained from two methods were similar. The mixture showed a eutectic system which has a single composition at the minimum melting temperature. Calculation results from simple thermodynamic equations were found in general agreements with present data. To determine the growth rate of NVP crystal which is important for the design of crystallization process, thicknesses of the crystal were measured with the time using a layer melt crystallizer. The growth rates increased as cooling temperatures decreased. Heat transfer coefficient correlated from present data was found to successfully describe the crystal growth behavior.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.7
• /
• pp.467-472
• /
• 2015

Thermal batteries are primary power sources for military applications requiring high reliability, robustness and long storage life. Conventional electrodes for thermal batteries are prepared by compacting powder mixtures into pellets. Separator is composed of halide mixture, such as LiCl-KCl eutectic salt, blended with MgO to immobilize the molten salt. In order to increase the power density and energy density, the resistance of electrolyte should be reduced because the resistance of electrolyte is predominant in thermal batteries. In this study, wetting behaviors and impregnation weight of molten salts as well as the micro structures of ceramic felt were investigated to be applicable to thin electrolyte. Discharge performances of single cell with the ceramic separator impregnated by molten salt were evaluated also. Zirconia felt with high porosity and large pore outperformed alumina felt in wetting characteristics and molten salt impregnation as well as discharge performances. Based on the results of this study, ceramic felt separator impregnated with molten salt have revealed as an alternative of conventional thick MgO based separator with no conspicuous sign of thermal runaway by short circuit.

• Clean Technology
• /
• v.12 no.3
• /
• pp.157-164
• /
• 2006

In order to purify 2-methylnaphthalene as main impurity included in naphthalene, SLE (solid-liquid equilibria) on two components system including naphthalene and 2-methylnaphthalene were measured and a layered melt crystallization has been studied. SLE in the present system is shown a simple eutectic mixture and the experimental results using DSC method is similar to the static method. Purity and yield of naphthalene in crystal depended mainly on the cooling rate: Increasing cooling rate, the purity of naphthalene in crystal increase, whereas the yield of that decrease. The effective distribution coefficient (Keff) as the degree of impurity removal was observed to decrease with decreasing of cooling rate. Therefore, the purity of naphthalene by melt crystallization can be enhanced to 5~7 %.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.130-134
• /
• 2016

The influence of Au/Ni-based contact formed on a lightly-doped (7.3×1017cm−3, Zn-doped) InGaAsP layer for electrical compensation of surface plasmon polariton (SPP) propagation under various rapid thermal annealing (RTA) conditions has been studied. The active control of SPP propagation is realized by electrically pumping the InGaAsP multiple quantum wells (MQWs) beneath the metal planar waveguide. The metal planar film acts as the electric contact layer and SPP waveguide, simultaneously. The RTA process can lower the metal-semiconductor electric contact resistance. Nevertheless, it inevitably increases the contact interface morphological roughness, which is detrimental to SPP propagation. Based on this dilemma, in this work we focus on studying the influence of RTA conditions on electrical control of SPPs. The experimental results indicate that there is obvious degradation of electrical pumping compensation for SPP propagation loss in the devices annealed at 400℃ compared to those with no annealing treatment. With increasing annealing duration time, more significant degradation of the active performance is observed even under sufficient current injection. When the annealing temperature is set at 400℃ and the duration time approaches 60s, the SPP propagation is nearly no longer supported as the waveguide surface morphology is severely changed. It seems that eutectic mixture stemming from the RTA process significantly increases the metal film roughness and interferes with the SPP signal propagation.

• Journal of Trauma and Injury
• /
• v.20 no.2
• /
• pp.115-118
• /
• 2007

Purpose: A eutectic mixture of local anesthetics (EMLA$^{(R)}$) cream has been used as a topical anesthetic to reduce the pain of procedures penetrating the skin. It is generally applied for 40 to 60 minutes before the painful procedure. Because of the long application period, EMLA$^{(R)}$ is not useful in the emergency department (ED). The purpose of this study was to determine whether a 20-minute application of 9.6% lidocaine would be useful in reducing the pain of routine peripheral intravenous cannulation in the ED. Methods: We examined 27 male and 19 female patients ages over 18 years of age who required intravenous cannula insertion. Intravenous insertion was performed on 46 patients: 24 patients in the placebo group (mean age: 40.0 years) and 22 in the 9.6% lidocaine group (mean age: 37.6 years). The 9.6% lidocaine or placebo gel was applied and covered with an occlusive dressing for 20 minutes. Pain was scored by the patients using a 0- to 10-cm visual analogue scale. Results: The patients in the 9.6% lidocaine group (mean pain score: 3.4) experienced less pain than those in the placebo group (mean: 5.3), and the difference was statistically significant (p=0.029). Conclusion: We concluded that a 20-minute application of 9.6% lidocaine is safe and effective for reducing pain associated with venipuncture.