• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.4
• /
• pp.36-43
• /
• 1992

This paper presents a hierarchical real-time operation control and monitoring scheme of the FMS/CIM center which has been implemented at the Automation and Systems Research Institute of Seoul National University. The hierarchical structure of the whole scheme consists of three lavers. The upper layer is in charge of on-line scheduling, computer network control, shop-floor monitoring and command generation for AGV dispatching, machining, assembly, inspection, set-up, etc. The middle layer has six modules, which are installed in the FMS host computer with the upper layer and run on the multi-tasking basis. Each module is connected to one of six cell controllers distributed in the FMS model plant and transfers operation command down to each cell controller through the Ethernet/TCP-IP local area network. The lower layer is comprised of six cell control software modules for machining cell, assembly cell, inspection cell, set-up stations. AS/RS and AGV. Each cell controller reports the status of the manufacturing facilites to the middle layer as well as ecxecuting the appropriate sequence control of the manufacturing processes.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.695-698
• /
• 2000

The services such as real-time audio and video applications have become increasingly popular, especially over the Internet. Furthermore, as being commercialized those contents on the Internet require quality of service (QoS) support to ensure their performance. PPP is the best solution to of for those kinds of services. The reason why we want to employ PPP is this satisfies most of the requirements associated with remote connectivity to an NSP, such as IP address assignment, security, and AAA (authentication, authorization and accounting). In addition, since ISPs and corporations are familiar with PPP based connectivity, easy migration from existing ISP infrastructure is expected, if QoS is guaranteed. But so for PPP has had no field to ensure the quality of service. This article presents the solution by using some tunneling protocols and the draft [1] that proposed additional LCP option fields to negotiate QoS. To communicate each other, after negotiating those option fields, over various protocols such as ATM, Ethernet, and etc. tunneling protocol is used. Following sections will mention those briefly. And the service provision to offer the end-to-end communication with negotiated QoS will also be proposed.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2326-2328
• /
• 2001

This paper's purpose is to obtain 3-Dimension information by using a monocular camera. This system embodies to obtain the height of object by using trigonometry method between a reference point of circumstance and an object. It is possible to build up system regardless of operating system, and then set it up. An comfortable USB port camera is used everywhere without the capture board. The internet can be used by using the applet and JMF everywhere. We regard the camera as a fixed. And we have developed a Real-Time JPEG/RTP Network Camera system using UDP/IP on Ethernet.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.564-567
• /
• 2005

For the application of monitoring system of the machine tool to industry, the requirements such as high reliability and low cost need to be satisfied. In this study, a reliable but inexpensive monitoring method for machine tool is introduced. To improve the monitoring reliability, several kinds of information related to machining and operation are selected; real-time video clip from USB camera, operation data and signal from CNC and feed motor torque. Especially, to improve the quality of real-time video clip, a camera housing is developed, it can significantly reduce the vibration effect and prevent from coolant and chip. The collected information are transferred to the monitoring terminals in remote sites using OPC and TCP/IP protocol over Ethernet, which give us convenience of development and interoperability.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.684-687
• /
• 2009

본 논문에서는 iSCSI 기반 IP 스토리지를 이용하여 IPTV Set-Top-Box에서 PVR 재생 및 저장에 적합한 네트워크 스토리지 구조를 제안한다. 제안된 네트워크 스토리지는 멀티미디어 재생 성능 향상 및 효율적인 데이터 관리를 위하여 Content-aware 선반입, 스토리지 형상 관리 기법을 제안하고 DES 알고리즘을 기반으로 사용자인증이 가능 하도록 설계하였다. 제안된 네트워크 스토리지를 SMP8634기반 임베디드 보드에서 리눅스 2.6.15, 100Mbps Ethernet 환경에서 성능을 평가한 결과 HD급 영상을 충분히 재생할 수 있음을 확인하였다.

• Nuclear Engineering and Technology
• /
• v.49 no.5
• /
• pp.989-995
• /
• 2017

Distributed Control System (DCS) communication networks, which use Fast Ethernet with redundant networks for the transmission of information, have been installed in digitalized nuclear power plants. Normally, failover tests are performed to verify the reliability of redundant networks during design and manufacturing phases; however, systematic integrity tests of DCS networks cannot be fully performed during these phases because all relevant equipment is not installed completely during these two phases. In additions, practical verification tests are insufficient, and there is a need to test the actual failover function of DCS redundant networks in the target environment. The purpose of this study is to verify that the failover functions works correctly in certain abnormal conditions during installation and commissioning phase and identify the influence of network failover on the entire DCS. To quantify the effects of network failover in the DCS, the packets (Protocol Data Units) must be collected and resource usage of the system has to be monitored and analyzed. This study introduces the use of a new methodology for verification of DCS network failover during the installation and commissioning phases. This study is expected to provide insight into verification methodology and the failover effects from DCS redundant networks. It also provides test results of network performance from DCS network failover in digitalized domestic nuclear power plants (NPPs).

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.395-400
• /
• 2017

As a serial communications protocol, Modbus has become a practically standard communication protocol and is now a commonly available means of connecting industrial electronic devices. Therefore, all devices can be connected using the Modbus protocol with the measurement and remote control on ships, buildings, trains, airplanes and more. The existing Modbus that has been used is based on serial communication. Modbus TCP uses Ethernet communication based on TCP / IP which is the most widely used Internet protocol today; so, it is faster than serial communication and can be connected to the Internet of Things. In this paper, we designed an algorithm to control LED lighting in a wireless Wi-Fi environment using the Modbus TCP communication protocol, and designed and implemented a LED controller circuit that can check external environmental factors and control remotely through the integrated management system of a ship. Temperature, humidity, current and illuminance values, which are external environmental factors, are received by the controller through the sensors, and these values are communicated to the ship's integrated management system via the Modbus protocol. The Modbus can be connected to Master devices via TCP communication to monitor temperature, humidity, current, illuminance status and LED output values, and also users can change the RGB value remotely in order to change to the desired color. In addition, in order to confirm the implementation of the controller, we developed a simulated ship management system to monitor the temperature, humidity, current and illumination conditions, and change the LED color of the controller by changing the RGB value remotely.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.4
• /
• pp.1059-1075
• /
• 1997

The transprot layer protocol for distrubuted multimedia applications in high speed network should gurantee the Quality of Serivce(QoS)requested by uwer.,The QoS Parmenters can be divied into two calssifications:those depend on the speed of a network such as bandiwidth,end-to-end transmission delay and throughput;and net- woek independent parameters such as various typed of group communications, retransmission method based on multimeda characteristic,acceptable packet wrror rate and transmission priority.In this proposed protocol,we divided user's QoS into performance redated parmeters and non-performance related parameters.The perform- ance-related paramenters are mapped into ATM traddic paramenters by the Distributed QoS Manger(DQM),the QoS manager,and the non-performance redlted paramenters are supported by the Distributed Multimedia Trans-port protocol(DMTP),a high-performance group transport protocol.Especially,becaues the DMTP is designed with considering the IP protocol,it can be efficiently used as an underlying protocol not onlu in ATM,but also in Ethernet,Token ring and FDDI LAN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7B
• /
• pp.602-607
• /
• 2006

A subscriber-oriented service became necessary for the QoS management due to the development of network. BcN(Broadband convergence Network) which incorporates communication, broadcasting and internet not only improves the quality of the communication and broadcasting service but also. aims at broadband service. Therefore, QoS management for each subscriber becomes more important. Not yet, however, the discussion for the subscriber oriented QoS management is not activated. Although, there are several techniques for subscriber distinction using flow information, IP information or MAC information, but they are only processed in layer 3 network. Actually, it is impossible to manage QoS of all subscriber's in layer 3 network. In this paper, we propose a method for QoS management scheme that does not need additional processes or large hardware in layer 2 network and analyze efficiency and overheads. We propose the first subscriber-oriented service method in layer 2 network that is applicable to either existing network or BcN.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.6
• /
• pp.1181-1190
• /
• 2013

The GOOSE(Generic Object Oriented Substation Event) is used as a network protocol to communicate between IEDs(Intelligent Electronic Devices) in international standard IEC 61850 of substation automation system. Nevertheless, the GOOSE protocol is facing many similar threats used in TCP/IP protocol due to ethernet-based operation. In this paper, we develop a IDS(Intrusion Detection System) for secure GOOSE Protocol using open software-based IDS Snort. In this IDS, two security functions for keyword search and DoS attack detection are implemented through improvement of decoding and preprocessing component modules. And we also implement the GOOSE IDS and verify its accuracy using GOOSE packet generation and communication experiment.