• 한국디지털건축인테리어학회논문집
• /
• 제1권1호
• /
• pp.46-50
• /
• 2001

It is known that to automate the quantity take-off process enables you to increase the productivity best among the construction business field. However, the limitation of 2D(Two-dimension) CAD System prevented a cost-estimating system which makes the great effects on the quantity take-off process from being developed. This study aims that you can automate both the itemized statements and the quantity take-off process by using commercially available object-oriented CAD system. The commercially available CAD system today does not give us entire satisfaction. This study shows the deduction of the old boundaries of the object-oriented CAD system and the solution of those problems. And it also studied about the quantity take-off process and the automated cost-estimating system that can be used in the simple and plain repair-maintenance work such as the execution drawing which doesn't need the complicated drawings.

• 한국건설관리학회논문집
• /
• 제8권4호
• /
• pp.155-166
• /
• 2007

본 연구는 건축공사 프로젝트의 기본 설계 단계에서의 개산견적 개념모델을 제안하고, 제안된 개산견적 개념을 적용하여 실제 주상복합 건물 프로젝트의 실적자료의 분석을 바탕으로 한 프로토타입 개발을 목적으로 한다. 국내의 건설산업은 급격한 시장 변화와 경쟁 심화의 과정을 겪고 있다. 특히 프로젝트의 조달 방식의 변화와 함께 입찰과 관련한 정보가 부족한 사업초기, 기본설계 단계에서 중요한 의사 결정이 이루어지며, 이러한 의사 결정의 기준이 되는 개산 견적의 중요성이 더욱 증가 되고 있다. 따라서 본 연구에서는 기존의 개산견적 방법을 분석하고 그것을 보완할 수 있는 공사 수량 변화 분석에 기반 한 개산견적 방법을 제안하고 프로토타입을 구축하였다. 또한, 이 연구에서는 기존의 공종별 공사비 분류체계에 빌딩구성요소(BE)별 및 층별 수량 분류를 추가하고 있다. 이러한 개념을 바탕으로 제안 모델을 Q-BASE (Quantity Based Active Schematic Estimating) 모델로 정의하였다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.594-595
• /
• 2006

Porous bearings are lubricated the oil that is contained in porous metal. Then they are always used with no oil supply, because of that, widely used electric motors. But, if oil flow out less than the limit, troubles often happen. This report shows that attempt of estimating oil quantity in porous bearing by using calculation that based Reynols' equation and Darcy's law, aimed of developing long life bearing. And comparing with experimental and calculation result, we show possibility of estimating rest oil quantity in porous bearing at steadry state by calculation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.227-228
• /
• 2022

In order to achieve the goal of cost management, which is one of the three major management goals of building production, this paper introduces an approximate cost estimating automation technology in the design stage as the importance of predicting construction costs increases. BIM is used for accurate estimating, and the quantity of structural members and finishing materials is calculated by creating a 3D model of the actual building. However, only 2D basic design drawings are provided when making an estimating. Therefore, for accurate quantity calculation, digitization of 2D drawings is required. Therefore, this research calculates the quantity of concrete structural members by calculating the area for the recognition area through 2D drawing recognition technology incorporating computer vision. It is judged that the development technology of this research can be used as an important decision-making tool when predicting the construction cost in the design stage. In addition, it is expected that 3D modeling automation and 3D structural analysis will be possible through the digitization of 2D drawings.

• 한국건축시공학회지
• /
• 제23권4호
• /
• pp.485-496
• /
• 2023

Precise construction cost estimation is paramount to determining the total construction expense of a project prior to the initiation of the construction phase. Despite this, manual quantification and cost estimation methods, which continue to be widely used, may result in imprecise estimation and subsequent financial loss. Given the fast-paced and efficiency-demanding nature of the construction industry, trustworthy quantity and cost estimation is essential. To mitigate these obstacles, this research is focused on establishing an automated quantity estimation algorithm, particularly designed for the main rebar of beams which are recognized for their complicated reinforcement configurations. The exact quantity derived from the proposed algorithm is compared to the manually approximated quantity, reflecting a variance of 10.27%. As a result, significant errors and impending financial loss can be averted. The implementation of the findings from this research holds the potential to significantly assist construction firms in quickly and accurately estimating rebar quantities while adhering strictly to applicable specifications and regulatory requirements.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제29권1호
• /
• pp.21-34
• /
• 1990

This is a study on an instruction of estimation for error correction in the calculation with a computer or a calculator. The aim of this study is to survey a new aspect of calaulation teaching and the teaching strategy of estimation and finally to frame a new curriculum model of estimation instruction. This research required a year and the outcomes of the research can be listed as follows: 1. Social utilities of estimation were made clear, and a new trend of calculation teaching related to estimation instruction was shown. 2. The definition of estimation was given and actual examples of conducting an estimation among pupils in lower grades were given for them to have abundant experiences. 3. The ways of finding estimating values in fraction and decimal fraction were presented for the pupils to be able to conduct an estimation. 4. The following contents were given as a basic strategy for estimation. 1) Front-end strategy 2) Clustering strategy 3) Rounding strategy 4) Compatible numbers strategy 5) Special numbers strategy 5. In an instuction of estimation the meaning, method. and process of calculation and calculating algorithm were reviewed for the cultivation of children's creativity through promoting their basic skill, mathematical thinking and problem-solving ability. 6. The following contents were also covered as an estimation strategy for measurement 1) Calculating the sense of quantity on the size of unit. 2) Estimating the total quantity by frequent repetition of unit quantity. 3) Estimating the length and the volume by weighing. 4) Estimating unknown quantity based on the quatity already known. 5) Estimating the area by means of equivalent area transformation. 7. The ways of instructing mental computation were presented. 8. Reviews were made on the curricular and the textbook contents concerning estimation instructions both in Korea and Japan. and a new model of curriculum was devised with reference to estimation instruction data of the United States.

• 한국과학교육학회지
• /
• 제23권3호
• /
• pp.229-238
• /
• 2003

일상적인 경험을 바탕으로 중학생들이 도구를 사용하지 않고 물리량의 치수를 어림하는 능력을 조사하였다. 이를 위하여 연구자들은 기본량에 해당하는 길이와 질량, 유도량에 해당하는 속력, 부피, 밀도에 대한 차수 어림 능력을 묻는 선택형 문항을 개발하였고, 서울지역 중학교 1학년과 3학년 학생 448명이 조사에 참가하였다. 전체적으로 반 이상의 학생들이 물리량의 치수를 참값과 다르게 어림하고 있었는데, 차원이 복잡한 유도량이거나 크기가 작을수록 차수 어림 능력이 낮아졌다. 학년에 따른 차이는 크지 않았으나 성별에 따라서 차수 어림 능력에 차이가 있었고 상대적으로 남학생이 길이 어림을 잘 하였다. 결론적으로 반수 이상의 학생들이 물리량이 차수를 제대로 어림하지 못한다는 점은 물리량과 단위에 대한 정성적인 이해가 부족함을 나타내며, 기능적인 측면을 강조하는 측정 교육이 가지는 한계점을 보여주었다. 따라서 실제 측정을 통하여 구한 물리량의 정성적인 의미를 이해할 수 있도록 하기 위하여 어림 교육이 필요함을 시사하고 있다.

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.176-181
• /
• 2011

A role of cost modeler is that of facilitating design process by the systematic application of cost factors so as to maintain sensible and economic relationships between cost, quantity, utility and appearance. These relationships help to achieve the client's requirements within an agreed budget. The purpose of this study is to develop a parametric cost estimating model for the early design stage by using the multi-dimensional system of OLAP (On-line Analytical Processing) based on the case of quantity data related to architectural design features. The parametric cost estimating models have been adopted to support decision making in the early design stage. These models typically use a similar instance or a pattern of historical case. In order to effectively use this type of data model, it is required to set data classification and prediction methods. One of the methods is to find the similar class in line with attribute selection measure in the multi-dimensional data model. Therefore, this research is to analyze the relevance attribute influenced by architectural design features with the subject of case-based quantity data used for the parametric cost estimating model. The relevance attributes can be analyzed by Analytical Characterization. It helps determine what attributes to be included in the OLAP multi-dimension.

• 문화기술의 융합
• /
• 제9권1호
• /
• pp.531-537
• /
• 2023

인테리어 공사는 설계단계에서 2D 도면을 바탕으로 예상되는 자재물량을 산출하고 예상비용을 산정, 적정한 소요예산을 산출, 합당한 공사 방안을 모색하게 된다. 그러므로 정확한 물량산출과 예산책정은 인테리어 공사의 수익성 여부를 판단하는 척도로서 매우 중요한 과정 중 하나이다. 이러한 과정이 대부분 2D 도면을 기본으로 하기 때문에 시간과 경력직이 투입되는 것이 현실이다. 경력직 인원이라고 하더라도 2D를 기반의 도면을 이용하여 면적산출을 하기 때문에 오류와 누락이 발생한다. 현재 인테리어 시장은 3D 모델링을 기본으로 기획에서 최종 설계까지 진행되고 있다. 그래서 이제는 3D 모델을 기반으로 한 물량산출이 오류와 누락을 줄일 수 있는 방법으로 대두되고 있다. 그래서 이 논문은 인테리어 분야에서 3D 모델링을 기반으로 한 물량산출의 기본 요소인 면적산출 추출에 대한 방법론을 제시하고자 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.149-151
• /
• 2011

Recently, Architectural Design based on Building Information Modeling(BIM) is popular, construction management based on BIM is necessary. such as Quantity take off, scheduling, and Life Cycle Cost Estimating etc. Therefore, in the study, LCC Estimating using BIM Data, which is extracted from architectural designing process is proposed.