• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.4
• /
• pp.158-164
• /
• 1994

A volumetric error compensation method was stueide with measuring systematic error of a Coordinate Measuring Machine(CMM). The volumetric error equations were proposed for a Moving Bridge type CMM. Using the error equations, error vectors in the measuring volume were corrected by a software method. The CMM was controlled by the compensation program separately in the measuring and moving function of the CMM proving. The linear accuracy of the CMM was measured by the Laser Interferometer and compared with the data before the volumetric error compensation. This method was proved as low cost and effective to reduce the systematic error of the CMM, as no hardware modification is required.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.6
• /
• pp.535-540
• /
• 2013

Objective: The aim of this study is to evaluate the effectiveness and efficiency of causal links between various error causes in human error analysis. Background: As finding root causes of human error in safety-critical systems is often a cognitively demanding and time-consuming task, it is particularly necessary to develop a method for improving both the quality and efficiency of the task. Although a few methods such as CREAM have suggested causal linking between error causes as a means to enhance the quality and efficiency of human error analysis, no published research to date has evaluated the performance of the causal links. Method: The performance of the CREAM links between error causes were evaluated with 80 railway accident investigation reports from the UK. From each report, errorneous actions of operators were derived, and for each error, candidate causes were found by following the predefined links. Two measures, coverage and selectivity, were used to evaluate the effectiveness and efficiency of the links, respectively. Results: On average, 96% of error causes actually included in the accident reports were found by following the causal links, and among the total of 121 possible error causes, the number of error causes to be examined further was reduced to one-tenth on average. As an additional result of this work, frequent error causes and frequently used links are provided. Conclusion: This result implies that the predefined causal links between error causes can significantly reduce the time and effort required to find the multiple levels of error causes and their causal relations without losing the quality of the results. Application: The CREAM links can be applied to human error analysis in any industry with minor modifications.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.5
• /
• pp.611-616
• /
• 2008

Error correcting codes (ECCs) are commonly used to protect against the soft errors. Single error correcting and double error detecting (SEC-DED) codes are generally used for this purpose. The proposed approach in this paper selectively reduced power consumption, delay, and area in single-error correcting, double error-detecting checker circuits that perform memory error correction. The multi-objective genetic algorithm is employed to solve the non -linear optimization problem. The proposed method allows that user can choose one of different non-dominated solutions depending on which consideration is important among them. Because we use multi-objective genetic algorithm, we can find various dominated solutions. Therefore, we can choose the ECC according to the important factor of the power, delay and area. The method is applied to odd-column weight Hsiao code which is well- known ECC code and experiments were performed to show the performance of the proposed method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.676-680
• /
• 2000

In this paper, an extended volumetric error model considering backlash in a three-axis machine tool was proposed and utilized for calculating the volumetric error of the machine tool at any position in three-dimensional workspace. Backlashes are interrelated; i.e. the angular backlash affects the straightness errors which then affect the calculated squareness errors. Therefore, a new concept was introduced to define the backlash of squareness errors to incorporate the backlash of squareness error into the volumetric error, and the characteristics of the backlash of squareness error were investigated. The effects of backlash errors were assessed, by experiments, fur 21 geometric errors of a machine tool. The backlash error was shown to be one of the systematic errors of a machine tool. Based on this volumetric error model, a computer-aided volumetric error analysis system was developed for a three-axis machine tool in this paper. Then the volumetric error at an arbitrary position can be obtained, and displayed in a three-dimensional graphic form.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.10
• /
• pp.45-52
• /
• 2004

This Paper presents a modified hard decision Viterbi decoder with an error prediction circuit enhancing performance for the burst error inputs. Viterbi decoder employs the maximum likelihood decoding algorithm which shows excellent error correction capability for the random error inputs. Viterbi decoders, however, suffer poor error correction performance for the burst error inputs under the fading channel. The proposed error prediction algorithm increases error correction capability for the burst errors. The algorithm estimaties the burst error data area using the maximum path metric for the erroneous inputs, It calculates burst error intervals based on increases in the maximum values of a path metric. The proposed decoder keeps a performance the same as the conventional decoders on AWGN channels for the IEEE802.l1a WLAN system. It shows performance inproving 15% on the burst error of multi-path fading channels, widely used in mobile systems.

• Korean Journal of Clinical Pharmacy
• /
• v.18 no.1
• /
• pp.1-5
• /
• 2008

The goal of this research was to find out the effect of dispensing error prevention program on the incidence of the error in a university hospital pharmacy in Daegu. Dispensing error in this research was defined as the error identified during double-checking process, so it does not mean that the wrong dispensing was administered to patient. Drug name error was the most frequently found error, accounting for about one third of all dispensing errors, and was followed by counting error, strength error, dosage form error, and others. Similar drug name was identified as the most frequent reason for the error, taking up about two thirds of all drug name errors. In this research, six months of dispensing error prevention program resulted in statistically significant reduction of dispensing error by 42 percent. Therefore, it is recommended that hospital pharmacy implement such prevention program regularly to reduce the incidence of the error. Finally, it appears that drug approval authority should closely check the similar drug names and have power to command pharmaceutical company to change the name if pertinent.

• Journal of the Ergonomics Society of Korea
• /
• v.19 no.1
• /
• pp.1-9
• /
• 2000

This study was performed to investigate some characteristics on human error proneness in the computerized work environment. Our concerning theme was on human error likelihood according to personal temperament. Two experiments were performed. The first experiment was to study the effect of field- independence/dependence on error likelihood. The second experiment was on error proneness. These experiments were performed in information search task. which was most frequent task in computerized work environment such as the control room of nuclear power plant. Ten subjects were participated in this study. Analyzed results are as follows. Field-independence/dependence had a significant effect in both information search time and error frequency. Error proneness had a significant effect in both factors, too. And, a positive correlation was found between error frequency and information search time. These results will be utilized as a basis to study operator's error proneness in the computerized control room of nuclear power plant. later on.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.375-378
• /
• 1995

Although laser interferometer measurement system has the advantage of range and accuracy, the traditional error measurement methods for geometric errors(two straightness and three angular errors) of a machine tool measures error components one at a time. It may also create an optical path difference and affect the measurement accuracy. In order to identify and compensate for geometric error of a moving body, an on-line measurement system for simultaneous detection of the five error components of a moving axis is required. An on-line measurement system with 5 degrees of freedom was developed for geometric error detection. Performance verification of the system was performed on an error generating mechanism. Experimental results show the feasibility of this system for identifying geometric errors of a side of machine tool.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.5
• /
• pp.850-858
• /
• 1997

A new a posteriori error estimator is introduced and applied to variational inequalities occurring in problems of flow through porous media. In order to construct element-wise a posteriori error estimates the global error is localized by a special mixed formulation in which continuity conditions at interfaces are treated as constraints. This approach leads to error indicators which provide rigorous upper bounds of the element errors. A discussion of a compatibility condition for the well-posedness of the local error analysis problem is given. Two numerical examples are solved to check the compatibility of the local problems and convergence of the effectivity index both in a local and a global sense with respect to local refinements.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.134-139
• /
• 1998

The objective of this study is to estimate and to compensate for the volumetric error of a machine tool. In this paper, the volumetric error is defined and error synthesis model is presented. Then, the volumetric error of workpiece is compared through the virtual machining and a new tool-path is generated to compensate for the error in the post-processor of CAM system using the error synthesis model. By this method, the error is compensated without modification or replacement of a machine tool being in use.