• 아시안잔디학회지
• /
• 제10권1호
• /
• pp.31-40
• /
• 1996

The mechanical expresion provides for the use of Soil property reserves and permanent protec-tion or improvement of soil resources in accordance with measurable standards. If the functions I (initial soil property), E (soil erosion), R (soil renewal), and M. (minimum allowable value) are assumed to be integrable in region A, erosion tolerance over a region is leaded to ${\int}_A{\int}I(m, cl, re, ch, b)dA-{\int}_A{\int}{\{\int}_{to}^{\infty}[E(w, re, c, re, ch, b, t)-R(m, ch, re, b, t)]dt}\dA{\geqq}{\int}_A{\int}M_i(m, cl, re, ch, b)dA$ were variable factors are m=parent material of soil, cl=climate, re=relief or topography, ch=soil characteristics, r=rain or water, w=wind, b=biota, and t=time.

• Journal of Microbiology and Biotechnology
• /
• 제23권12호
• /
• pp.1737-1746
• /
• 2013

IbMYB1, a transcription factor (TF) for R2R3-type MYB TFs, is a key regulator of anthocyanin biosynthesis during storage of sweet potatoes. Anthocyanins provide important antioxidants of nutritional value to humans, and also protect plants from oxidative stress. This study aimed to increase transgenic potatoes' (Solanum tuberosum cv. LongShu No.3) tolerance to environmental stress and enhance their nutritional value. Transgenic potato plants expressing IbMYB1 genes under the control of an oxidative stress-inducible peroxidase (SWPA2) promoter (referred to as SM plants) were successfully generated through Agrobacterium-mediated transformation. Two representative transgenic SM5 and SM12 lines were evaluated for enhanced tolerance to salinity, UV-B rays, and drought conditions. Following treatment of 100 mM NaCl, seedlings of SM5 and SM12 lines showed less root damage and more shoot growth than control lines expressing only an empty vector. Transgenic potato plants in pots treated with 400 mM NaCl showed high amounts of secondary metabolites, including phenols, anthocyanins, and flavonoids, compared with control plants. After treatment of 400 mM NaCl, transgenic potato plants also showed high DDPH radical scavenging activity and high PS II photochemical efficiency compared with the control line. Furthermore, following treatment of NaCl, UV-B, and drought stress, the expression levels of IbMYB1 and several structural genes in the flavonoid biosynthesis such as CHS, DFR, and ANS in transgenic plants were found to be correlated with plant phenotype. The results suggest that enhanced IbMYB1 expression affects secondary metabolism, which leads to improved tolerance ability in transgenic potatoes.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.328-331
• /
• 1998

Because of the powerful tolerance of overload, dynamic response and anti-erosion, Reluctive Pressure Transducer(RPT), as a measuring element of oil pressure equipment is applied to the measuring system of vessels, air craft. The Electrical reluctance appeared in the pressed diaphragm. To process the reluctance as a electric signal, bridge circuit is used. The design using the reluctance of pressure sensor is described in this paper. For the high efficiency of the sensitive RPT, pressure sensor structure is presented and electrical signal processing is simulated.

• 한국지리정보학회지
• /
• 제23권2호
• /
• pp.95-105
• /
• 2020

효율적인 연안관리 업무를 추진하기 위해서는 다양한 요인에 의해 변화하는 지형의 특성을 지속적으로 모니터링하는 것이 중요하다. 본 연구에서는 격포해수욕장을 대상으로 시계열 UAV 영상을 촬영하였으며, UAV 위치정확도 평가를 위해 VRS 측량성과와 비교한 결과 ±11cm(X), ±10cm(Y), ±15cm(Z)의 표준편차를 얻었으며 따라서 수치지도 작업규정상의 허용오차를 만족하는 것으로 확인되었다. 또한 UAV 영상을 통해 구축한 수치표면모델을 이용하여 침식 및 퇴적 변화 모니터링을 실시한 결과 2018년 6월과 2018년 12월 사이에는 평균 0.01m의 퇴적이 발생하였으며, 2018년 12월과 2019년 6월 사이에는 0.03m의 침식이 발생된 것으로 분석되었다. 따라서 2018년 6월과 2019년 6월 사이에는 전체적으로 0.02m의 침식이 발생된 것을 알 수 있었다. 그리고 시계열로 분석한 지형변화 모니터링 결과로부터 침식 및 퇴적 높이 구간별 면적을 분석한 결과 ±0.5m 구간에서 침식과 퇴적면적이 가장 넓게 분포함을 알 수 있었다. 본 연구에서 제시한 시계열적 UAV 영상을 이용한 3차원 지형 모델링 성과를 활용하여 해안지역의 지형변화를 지속적으로 모니터링 한다면 양빈이나 준설 등과 같은 연안관리 업무를 보다 효과적으로 지원할 수 있을 것이다.

• Plant Biotechnology Reports
• /
• 제3권4호
• /
• pp.301-307
• /
• 2009

To understand the adaptability of alfalfa (Medicago sativa L.) to chilling stress, we analyzed the antioxidative mechanism during seed germination. The germination rates of six alfalfa cultivars were studied comparatively at $10^{\circ}C$. Xinmu No. 1 and Northstar were selected as chilling stress-tolerant and stress-sensitive cultivars for further characterization. After chilling treatment, Xinmu No. 1 showed higher seedling growth than Northstar. Xinmu No. 1 exhibited low levels of hydrogen peroxide and lipid peroxidation compared with Northstar. In addition, shoots in Xinmu No. 1 treated with chilling showed higher activities of the superoxide dismutase, ascorbate peroxidase (APX), and catalase than those of Northstar, whereas Xinmu No. 1 showed higher APX activity in roots that Northstar. These results indicated that high antioxidation activity in Xinmu No. 1 under chilling stress is well associated with tolerance to chilling condition during germination.

• Spatial Information Research
• /
• 제14권4호
• /
• pp.363-377
• /
• 2006

본 연구에서는 개정범용토양유실공식(RUSLE: Revised Universal Soil Loss Equation)을 이용하여 미국 South Carolina 주 Congaree 유역에 대한 평균 연간 토양 유실량을 산출 하였으며 비점오염원 토양 유실 민감지역을 추출하였다. 평균 연간 토양 유실량은 강우-유출 침식성 인자, 토양침식성 인자, 지면특성 인자, 식생피복 인자, 그리고 토양보존 인자의 곱으로 계산할 수 있으며, 토양 유실 민감지역은 토양 유실량이 토양침식 허용량을 초과하는 지역으로 추출할 수 있다. 연구 결과, 전체 면적의 10% 이상의 면적이 비점오염원 토양 유실 민감 지역으로 확인되었으며, Congaree 유역의 7개 소유역중 Congaree Creek, Gills Creek 소유역의 도심지역과 Cedar Creek 소유역의 농업지역에서 가장 심각한 토양 유실의 위험이 나타났다. 관심 지역의 인위적, 자연적 변화가 토양 유실에 가져오는 영향을 살펴보기 위한 시범 모형으로서, 개정범용토양유실공식에 기초한 내장형 모형이 Visual Basic for Applications (VBA)를 이용하여 ESRI사의 ArcGIS ArcMap 9.0에서 사용할 수 있도록 개발되었다. 이 내장형 모형에서 사용자는 각 소유역의 토지 피복, 식생 유형, 지표 식생 유형, 경사, 작물 유형, 경작 방식 등을 변경시킴으로써 C, LS, P 인자를 변화시킬 수 있으며, 계산된 평균 연간 토양 유실량과 민감 지역을 현재 상태의 값들과 비교하여 앞으로의 토양유실 관리를 위한 주요 정보로 사용할 수 있다.

• 한국해양공학회지
• /
• 제28권3호
• /
• pp.236-244
• /
• 2014

This study considered a seagrass habitat in order to analyze the characteristics of a marine environment of seagrass located in the Seomjin river estuary, through an analysis of the distribution of the water depth, field observation, and three-dimensional numerical experiments using an EFDC model. The seagrass habitat was usually distributed at D.L(-) 0.5~0.0 m, and was hardly seen in the intertidal zone higher than that range. The distribution of the water temperature was within the range of $7.0{\sim}23.2^{\circ}C$, and the seagrass was demonstrated to have a strong tolerance to changes in the water temperature. In addition, the salinity distribution was found to be 27.2~31.0 psu, with suspended solids of 32.1 mg/L, which were higher than the previous research results (Huh et al., 1998), implying that there may be a reduction in the amount of deposits caused by the suspended solids. As for the sedimentary facies, they were comprised of 62.7% sand, 19.1% silt, and 18.2% clay, indicating that the arenaceous was superior and the sedimentary facies were similar to that of Dadae Bay. According to a numerical experiment, the maximum tidal current was 75 cm/s, while the tidal residual current was 10 cm/s, confirming that it sufficiently adapted to strong tidal currents. The erosion and deposition are predicted to be less than 1.0 cm/year. Thus, it is judged that the resuspension of sediments due to tidal currents and the changes in sedimentary facies are insignificant.

• 대한토목학회논문집
• /
• 제30권5D호
• /
• pp.533-540
• /
• 2010

댐은 용수공급 및 홍수조절을 위한 매우 중요한 시설물이며, 따라서 댐의 효율적인 관리를 위해서는 저수용량을 정확히 분석하는 연구가 필요하다. 본 연구에서는 충주댐 저수지를 대상으로 다차원공간정보를 이용하여 시계열 저수용량 비교하였으며 주요 결론은 다음과 같다. 먼저 댐 저수지 주변의 육상부와 수심부에 각각 LiDAR와 MBES 측량을 수행하였으며, 측량자료의 정확도 향상을 위해 캘리브레이션 보정과정을 실시한 후 지상기준점과의 검정을 통해 허용오차 기준을 만족하는 다차원공간정보를 구축할 수 있었다. 항공 LiDAR와 MBES 자료를 연계하여 생성한 정밀지형자료로부터 불규칙삼각망 모델을 이용하여 수위별 저수용량을 계산하였으며 회귀분석을 통해 2008년도 저수용량 곡선식을 개발하였다. 2008년도 저수용량을 1986년과 1996년과 비교한 결과, 저수지 퇴사증가로 인해 수위가 높아질수록 총저수용량은 감소하는 추세를 보였다. 또한 수위 구간별로 저수용량을 계산하여 침식과 퇴사가 나타나는 구간을 분석할 수 있었으며, 특히 1986~2008년과 1996~2008년 동안의 평균수위 직상부 구간인 130.0~135.0m에서 가장 많은 침식특성이 나타났으며 이는 집중강우로 인해 저수지 사면침식이 주요 원인으로 판단된다.

• Corrosion Science and Technology
• /
• 제13권2호
• /
• pp.62-69
• /
• 2014

A huge number of carbon steel piping components installed in the secondary system of nuclear power plants are exposed to aging mechanisms such as FAC (Flow-Accelerated Corrosion), Cavitation, Flashing, and LDIE (Liquid Droplet Impingement Erosion). Those aging mechanisms can lead to thinning of the piping components. To manage the wall thinning degradation, most of utilities in the world predict the wall thinning rate based on the computational program such as CHECWORKS, COMSY, and BRT-CICERO, evaluate the UT (Ultrasonic Test) data, and determine next inspection timing, repair or replacement, if needed. There are several evaluation methods, such as band, blanket, and strip methods, commonly used for determining the wear of piping components from single UT inspection data. It has been identified that those single UT evaluation methods not only do not consider the manufacturing features of pipes, but also may exclude the data of the most thinned point when determining the representative wear rate of piping components. This paper describes a newly developed single UT evaluation method, E-Cross method, for solving above problems and introduces application examples for several pipes and elbows. It was identified that the E-Cross method using the length and width of UT data excluded the most thinned points appropriate as the single UT evaluation method for thinned piping components.

• 한국정밀공학회지
• /
• 제23권2호
• /
• pp.146-153
• /
• 2006

Acceleration sensors have widely been used in the various fields of industry. In recent years, micromachining accelerometers have been developed and commercialized by the micromachining technique or MEMS technique. Typical structure of such sensors consist of a cantilever beam and a vibrating mass fabricated on Si wafers using etching. This study investigates the feasibility of powder blasting technique for microfabrication of sensor structures made of the pyrex glass alternating the existing Si based acceleration sensor. First, as preliminary experiment, effect of blasting pressure, mass flow rate of abrasive and no. of nozzle scanning on erosion depth of pyrex and soda lime glass is studied. Then the optimal blasting conditions are chosen for pyrex sensor. Structure dimensions of designed glass sensor are 2.9mm and 0.7mm for the cantilever beam length and width and 1.7mm for the side of square mass. Mask material is from aluminium sheet of 0.5mm in thickness. Machining results showed that tolerance errors of basic dimensions of glass sensor ranged from 3um in minimum to 20um in maximum. This results imply the powder blasting can be applied for micromachining of glass acceleration sensors alternating the exiting Si based sensors.