• 한국분무공학회지
• /
• 제26권3호
• /
• pp.127-134
• /
• 2021

Fire sprinkler initial spray was analyzed by Large eddy simulation (LES) and Volume of Fluid (VoF) integrated method. The IsoAdvector geometric VoF was used to identify the liquid-gas interface clearly even with the large Courant-Friedrichs-Lewy number. To reduce the computational costs, sector meshes and Adaptive Mesh Refinement up to level 3 were used. Base mesh size was 1 mm, which is roughly equivalent to the initial sprinkler droplet. Top surface radius of boss and deflector size were modified to investigate the effects of sprinkler head design on primary breakup process. When top surface radius of boss was increased, vertical liquid sheet was formed. This phenomenon reduced the sheet breakup radius, sheet thickness and velocity. Due to reduced liquid sheet thickness, a large amount of ligaments was created from the liquid sheet. As a result, there was a dramatic decrease in volume per surface area, indicating an increase in breakup process. Spray pattern viewed in radial direction also changed when top surface radius of boss increased. When top surface radius of boss was increased, a T-shaped pattern was observed while a V-shaped pattern was observed in all other cases. When the deflector size increases, the spray pattern remains V-shaped, even if the top surface radius of boss increased. Further studies on promoting atomization of the water supplied to the lower part of the sprinkler head in the T-shape pattern should be conducted.

• 콘크리트학회논문집
• /
• 제28권1호
• /
• pp.95-104
• /
• 2016

강섬유가 보강된 콘크리트의 지반 바닥슬래브는 소성해석법인 항복선 이론을 바탕으로 평균강도 개념인 등가 휨 강도비로서 설계 휨강도를 평가하였다. 최근 유럽의 설계기준에서는 강섬유에 의한 인장성능을 균열이후의 잔류 휨강도를 직접 평가하도록 하였다. 따라서, 본 연구에서는 기존의 등가 휨강도비와 잔류 휨강도에 따른 인장성능을 실험적으로 평가하고, 하중의 등가 접촉반경과 상대강성반경 비에 의해 하중 위치별 휨 내력을 평가하였다. 설계 휨 내력은 ACI 360R-10 기준이 TR 34 (2003 & 2013)에 비해 과소 평가하였다. 또한, 잔류 휨강도로서 평가하는 TR 34 (2013)은 등가 휨강도비로 계산되어진 TR 34 (2003)의 휨 내력에 비해 다소 작게 평가하고 있지만, 그 차이는 크지 않았다.

• Computers and Concrete
• /
• 제11권4호
• /
• pp.271-289
• /
• 2013

In this research, a developed microstructural model of cement particles was presented to describe the cement hydration procedure. To simplify the hydration process, the whole hydration was analyzed in a series of sub-steps. In each step, the hydration degree, as well as the microstructural size of the hydration cell, was calculated as a function of the radius of the unreacted cement particles. With the consideration of the water consumption and the reduction of the interfacial area between water and hydration products, the micro-level expressions of the cement hydration kinetics were established. Then the heat released and temperature history of the concrete was carried out with the hydration degree obtained from each sub-steps. The equivalent age method based on the Arrhenius law was introduced in this research. Based on the equivalent age method, a maturity model was applied to describe the evolution of the mechanical properties of the material during the hydration process. The finite element program ANSYS was used to analyze the temperature field in concrete structures. Then thermal stress field was calculated using the elasticity modulus obtained from code formulate. And the risk of thermal cracking was estimated by the comparison of thermal stress and concrete tensile strength.

• Advances in concrete construction
• /
• 제9권1호
• /
• pp.103-113
• /
• 2020

This paper deal with the critical fluid velocity response of nanocomposite pipe conveying fluid based on numerical method. The pressure of fluid is obtained based on perturbation method. The motion equations are derived based on classical shell theory, energy method and Hamilton's principle. The shell is reinforced by nanoparticles and the distribution of them are functionally graded (FG). The mixture rule is applied for obtaining the equivalent material properties of the structure. Differential quadrature method (DQM) is utilized for solution of the motion equations in order to obtain the critical fluid velocity. The effects of different parameters such asCNT nanoparticles volume percent, boundary conditions, thickness to radius ratios, length to radius ratios and internal fluid are presented on the critical fluid velocity response structure. The results show that with increasing the CNT nanoparticles, the critical fluid velocity is increased. In addition, FGX distribution of nanoparticles is the best choice for reinforcement.

• 대한수학회지
• /
• 제41권1호
• /
• pp.21-38
• /
• 2004

We prove that a Banach space that is convex-transitive and such that for some element u in the unit sphere, and for every subspace Μ containing u, it happens that the subset of norm attaining functionals on Μ is second Baire category in $M^{*}$ is, in fact, almost-transitive and superreflexive. We also obtain a characterization of finite-dimensional spaces in terms of functions that attain their supremum: a Banach space is finite-dimensional if, for every equivalent norm, every rank-one operator attains its numerical radius. Finally, we describe the subset of norm attaining functionals on a space isomorphic to $\ell$$_1$, where the norm is the restriction of a Luxembourg norm on $L_1$. In fact, the subset of norm attaining functionals for this norm coincides with the subset of norm attaining functionals for the usual norm.m.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권2호
• /
• pp.77-82
• /
• 2002

This Paper describes the dynamic load simulator for high-speed elevator system, which can emulate 3-mass system as well as equivalent 1-mass system. In order to implement the equivalent inertia of entire elevator system the conventional simulators have generally utilized the mechanical inertia(flywheel) with large radius, which makes the entire system large and heavy. In addition, the mechanical inertia should be replaced each time in order to est another elevator system. In this paper, the dynamic load simulation methods using electrical inertia are Presented so hat the volume and weight of simulator system are greatly reduced and the adjustment of inertia value can be achieved easily by software. Experimental results show the feasibility of this simulator system.

• 한국정보처리학회논문지
• /
• 제7권10호
• /
• pp.3098-3104
• /
• 2000

본 논문에서는 퍼셉트론 형태의 SOM(PSOM)을 정의한다. 그리고 이 PSOM의 출력뉴런의 목표 값을 적당히 설정할 경우 PSOM은 Kohonen's SOM이 됨을 보인다. 이는 PSOM가 SOM의 일반화된 알고리즘임을 시사한다. 또한 클러스터링 문제를 단위 초구면상(Hyperphere)에 분포한 벡터들로 한정할 경우 SOM은 Dot-product SOM(DSOM)과 동등한 알고리즘임을 보인다. 즉, DSOM은 SOM의 특수한 형태이며, 결론적으로, PSOM은 DSOM도 포함하는 알고리즘이다. 본 논문에서는 이를 증명하고 결론을 맺는다.

• 한국안광학회지
• /
• 제15권3호
• /
• pp.201-206
• /
• 2010

목적: 본 연구는 유치원생들을 대상으로 안광학 성분 값들과 굴절이상도 간의 상관성을 알아보고자 하였다. 방법: 대상자는 안질환이 없는 유치원생 80안으로 하였다. 굴절검사, 각막굴절력, 각막곡률반경, 안축장, 전방깊이를 검사하고 분석 하였다. 안축장과 각막 굴절력사이에서 가장 높은 상관성을 보였다(r=-0.674, p=0.000). 키, 몸무게, 안축장(AL)/각막곡률반경(CR)비가 안축장과 양의 상관성을 보였다(r=0.351, r=0.408, r=0.488). 굴절이상과 각막굴절력은 안축장과 음의 상관성을 보였다(r=-0.302, r=-0.674). 전방깊이, 각막굴절력은 AL/CR 비와 양의 상관성을 보였다(r=0.422, r=0.280). 굴절이상, 각막곡률반경은 AL/CR 비와 음의 상관성을 보였다(r=-0.448, r=-0.396). 결론: 취학 전 어린들에 있어서 눈의 굴절이상을 진단하는데 AL/CR 비가 매우 중요한 지표임을 알 수 있었다.

• 연구논문집
• /
• 통권23호
• /
• pp.5-13
• /
• 1993

The present work deals with the theoretical prediction of static & dynamic characteristic of annular type externally pressurized thrust air bearings with metal-sintered porous media. For the evaluation of surface loading effect by machining, it is assumed that the flow at the porous surface is dominant and which is equivalent to the flow through orifice. Finite different method with over-relaxation method is used to solve the numerical problems. The influences of radius ratio, supply pressure and squeeze number on performances are investigated, as the results. The results of this study can be used to predict the optimal running condition and stable realm of porous bearings.

• 대한수학회논문집
• /
• 제21권1호
• /
• pp.53-64
• /
• 2006

In this paper, we are concerned with the algebraic representation of the quasi-nilpotent part for prehermitian operators on Banach spaces. The quasi-nilpotent part of an operator plays a significant role in the spectral theory and Fredholm theory of operators on Banach spaces. Properties of the quasi-nilpotent part are investigated and an application is given to totally paranormal and prehermitian operators.