DOI QR코드

DOI QR Code

Thermal cracking analysis of concrete with cement hydration model and equivalent age method

  • Tian, Ye (College of Civil Engineering and Architecture, Zhejiang University) ;
  • Jin, Xianyu (College of Civil Engineering and Architecture, Zhejiang University) ;
  • Jin, Nanguo (College of Civil Engineering and Architecture, Zhejiang University)
  • 투고 : 2011.11.02
  • 심사 : 2012.09.06
  • 발행 : 2013.04.25

초록

In this research, a developed microstructural model of cement particles was presented to describe the cement hydration procedure. To simplify the hydration process, the whole hydration was analyzed in a series of sub-steps. In each step, the hydration degree, as well as the microstructural size of the hydration cell, was calculated as a function of the radius of the unreacted cement particles. With the consideration of the water consumption and the reduction of the interfacial area between water and hydration products, the micro-level expressions of the cement hydration kinetics were established. Then the heat released and temperature history of the concrete was carried out with the hydration degree obtained from each sub-steps. The equivalent age method based on the Arrhenius law was introduced in this research. Based on the equivalent age method, a maturity model was applied to describe the evolution of the mechanical properties of the material during the hydration process. The finite element program ANSYS was used to analyze the temperature field in concrete structures. Then thermal stress field was calculated using the elasticity modulus obtained from code formulate. And the risk of thermal cracking was estimated by the comparison of thermal stress and concrete tensile strength.

키워드

참고문헌

  1. ACI 318-95 (1995), Building code requirements for reinforced concreteand commentary, American Concrete Institute, U.S.
  2. ACI Committee 363 (1992), State-of-the art report on high-strength concrete, American Concrete Institute, U.S.
  3. Bentz, D.P. and Garboczi, Edward J. (1991), "Percolation of phases in a three- dimensional cement paste microstructural model", Cement Concrete Res., 21(2-3), 325-344. https://doi.org/10.1016/0008-8846(91)90014-9
  4. Bezjak, A. and Jelenic, I. (1980), "On the determination of rate constants for hydration processes in cement pastes", Cement Concrete Res., 10, 553-563. https://doi.org/10.1016/0008-8846(80)90099-X
  5. Bezjak, A. (1980), "Kinetics analysis of cement hydration including various mechanistic concepts: I. theoretical development", Cement Concrete Res., 13(3), 305-318.
  6. Bezjak, A. (1986), "Nuclei growth model in kinetic analysis of cement hydration", Cement Concrete Res., 16(4), 553-563.
  7. Bogue, R.H. (1947), The chemistry of portland cement, Reinhold Publishing Corporation, New York.
  8. Breugel, K.V. (1995), "Numerical simulation of hydration and microstructural development in hardening cement based materials-(I)Theory", Cement Concrete Res., 25(2), 319-331. https://doi.org/10.1016/0008-8846(95)00017-8
  9. Breugel, K.V. (1995), "Numerical simulation of hydration and microstructural development in hardening cement based materials-(II)Applications", Cement Concrete Res., 25(3), 522-530. https://doi.org/10.1016/0008-8846(95)00041-A
  10. Dabic, P., Krstulovic, R. and Rusic, D. (2000), "A new approach in mathematical modeling of cement hydration development", Cement Concrete Res., 30(7), 1017-1021. https://doi.org/10.1016/S0008-8846(00)00293-3
  11. Freisleben, H.P. and Pedersen, E.J. (1977), "Maturity computer for controlled curing and hardening of concrete", Nordisk Betong, 1, 19-34.
  12. Fu, F. (1999), Structure materials, Southeast University Press, Nanjing.
  13. Hattel, J.H. and Thorborg, J. (2003), "A numerical model for predicting the thermomechanical conditions during hydration of early-age concrete", Appl. Math. Model., 27(1), 1-26. https://doi.org/10.1016/S0307-904X(02)00082-3
  14. Krstulovic, R. and Dabic, P. (2000), "A conceptual model of the cement hydration process", Cement Concrete Res., 30(5), 693-698. https://doi.org/10.1016/S0008-8846(00)00231-3
  15. Ling, D.S., Xu, D.S. and Shen, Y.Y. (2005), "Model for hydration heat of cement in concrete and its application", Eng. Sci., 39(11), 1695-1698.
  16. Livingston, R.A. (2000), "Fractal nucleation and growth model for the hydration of tricalcium silicate", Cement Concrete Res., 30(12), 1853-1860. https://doi.org/10.1016/S0008-8846(00)00457-9
  17. Parka, K.B., Noguchib, T. and Plawsky, J. (2005), "Modeling of hydration reactions using neural networks to predict the average properties of cement paste", Cement Concrete Res., 35(9), 1676-1684. https://doi.org/10.1016/j.cemconres.2004.08.004
  18. Rastrup, E. (1954), "Heat of hydration in concrete", Mag. Concrete Res., 6, 79-92. https://doi.org/10.1680/macr.1954.6.17.79
  19. Saul, A.G.A. (1951), "Principles underlying the steam curing of concrete at atmospheric pressure", Mag. Concrete Res., 2(6), 127-140. https://doi.org/10.1680/macr.1951.2.6.127
  20. Schutter, G.D. (2002), "Finite element simulation of thermal cracking in massive hardening concrete elements using degree of hydration based material laws", Comput. Struct., 80(27-30), 2035-2042. https://doi.org/10.1016/S0045-7949(02)00270-5
  21. Schutter, G.D. and Taerwe, L. (1995), "General hydration model for portland cement and blast furnace slag cement", Cement Concrete Res., 25, 593-604. https://doi.org/10.1016/0008-8846(95)00048-H
  22. Stroeven, M. and Stroeven, P. (1999), "Space system for simulation of aggregated matter application to cement hydration", Cement Concrete Res., 29, 1299-1304. https://doi.org/10.1016/S0008-8846(99)00077-0
  23. Taplin, J.H. (1968), "On the hydration kinetics of hydraulic cement", Proceedings of 5th International ymposium, Chemistry of cement, Tokyo.
  24. Weiss, J. (2003), "Experimental determination of the 'Time Zero', t0 ('Maturity-Zero', M0)", RILEM Report 25: Early age cracking in cementitious systems. RILEM Publications SARL.
  25. Yan, P.Y. and Zhang, F. (2006), "Kinetics model for the hydration mechanism of cementitious materials", J. Chinese Ceram. Soc., 34(5), 555-559.
  26. Yang, Q.S. and Li, C.J. (2006), "Evolution of properties in hydration of cements-A numerical study", Mech. Res. Commun., 33(5), 717-727. https://doi.org/10.1016/j.mechrescom.2005.11.006
  27. Zhao, X.Z. (1984), Chemical reaction kinetics, Higher education press, Beijing.
  28. Zhu, B.F. (1999), Thermal stress and temperature control of mass concrete, WaterPower Press, Beijing.

피인용 문헌

  1. Coupling effect of temperature and relative humidity diffusion in concrete under ambient conditions vol.159, 2018, https://doi.org/10.1016/j.conbuildmat.2017.10.128
  2. Prediction of temperature distribution in hardening silica fume-blended concrete vol.13, pp.1, 2014, https://doi.org/10.12989/cac.2014.13.1.097
  3. Prediction model for the hydration properties of concrete vol.12, pp.4, 2013, https://doi.org/10.12989/cac.2013.12.4.377
  4. Modeling of temperature history in the hardening of ultra-high-performance concrete vol.14, pp.3, 2014, https://doi.org/10.5345/JKIBC.2014.14.3.273
  5. A New Method for Predicting Compressive Strength of Cement-Based Materials vol.788, pp.1662-8985, 2013, https://doi.org/10.4028/www.scientific.net/AMR.788.502
  6. Numerical Simulation Analysis of Temperature Control of Large Volume Concrete Aqueduct vol.199, pp.None, 2013, https://doi.org/10.1088/1755-1315/199/3/032044