• 한국학교수학회논문집
• /
• 제12권2호
• /
• pp.281-308
• /
• 2009

일차방정식의 해결 과정에서 어떤 문항은 등호('=')관계를 올바르게 표현하고, 다른 문항은 등호('=')관계를 올바르게 표현하지 못한 것으로 나타났다. 학생들이 등호('=') 관계를 올바르게 표현할 수 있는지, 표현할 수 없는지는 문항에 따라 그 반응이 다르게 나타나므로 여러 문항에 대한 테스트를 한 후에 비교 분석하여 학습지도 방향을 설정하고, 교수 학습지도가 이루어져야 할 것이다. 일차방정식의 풀이 방법이 제시되지 않은 문항에서 방정식의 해를 구한 대부분의 학생들은 이항을 사용하여 해결 하였다. 등식의 성질을 사용하여 해결하라는 문항에서도 등식의 성질을 사용하여 해결하기 보다는 이항을 사용하여 해결한 학생들이 대부분 이었다. 등식의 성질과 이항을 모두 사용하여 방정식을 해결할 수 있도록 교수 학습이 이루어져야 할 것이다.

• 대한가정학회지
• /
• 제29권3호
• /
• pp.175-190
• /
• 1991

The purpose of this study is to investigate communication styles in married couples. The subjects are a total of 301 couples living in Seoul. The main results are summarized as follows: 1. The styles of marital communication are consisted of 5 factors which are reproachful attitude, rational attitude, concessive attitude, unilateral attitude, and unconcerned attitude. 2. The styles of marital communication are classified into 5 styles in husbands which are arbitrary style, obeident style, authoritarian style, unconcerned style, and respectful style, and in wives, 4 styles which are arbitrary style, obeident style, unconcerned style, and respectful style. 3. The husband's arbitrary style and wives' unconcerned style are differently perceived by husbands and wives. 4. The relations of marital communication styles are classified into 3 relations which are supplementary relation, antagonistic relation, and equal relation. 5. In the case of equal relation and supplementary relation in comparison with antagonistic relation, husbands satisfy more with their wives' communication. And in the case of antagonistic relation in comparison with supplementary relation, husbands and wives want more to change of spouses' communication. 5. The relations of marital communication styles are affected in husbans by education, in wives by age, and family life cycle.

• 대한한의학원전학회지
• /
• 제24권6호
• /
• pp.111-124
• /
• 2011

The objectives of this study are to look into the grammatical characteristics and find misinterpretations on the translation books. 1. Sentences characteristics 1) Lots of ellipses of grammatical parts can be found such as conjunction, postposition, particle, Coverb, and focus on the parts which has practical meaning such as noun, pronoun, verb, adjective in the sentences. 2) Some predicates are skipped in the later phrases which has contradictive concepts against them of former phrases. 3) Pure Korean word order is exposed especially in complement. 2. Translation fallacy 1) There is fallacy in the sentences omitted paratactic conjunction as follows (1) mistranslation based on the wrong concept of the context between equal relation and subordinate relation. (2) failure on setting up the period, (3) misunderstanding equal relation as cause relation. 2) Some singular phrases, which are condition relation, were analyzed as plural phrases in the sentences omitted connection conjunction. 3) Ellipses of postposition obstruct understanding the difference between modifier and modificand in some sentences. 4) Some cause relation phrases were translated as equality relation due to lack of recognition of ellipsis of coverbs.

• 가정과삶의질연구
• /
• 제19권2호
• /
• pp.1-12
• /
• 2001

The purpose of this study is to develop and evaluate family life education for meddle-aged man. We developed family life education program for man consisting of 4 sessions, which is based on the system theory and strong family perspective. The program was designed to contribute to making sound family culture and more to make more equal relation between a couple by breaking from the sex-types identity and recognizing androgyny. After implementing a program for 4 weeks, the quantity and quality evaluation revealed that the program made the middled-aged man have a chance to recognize the importance of their family, especially the need to respect wife, to reflect family role performance and to learn the importance of communication between a couple.

• 한국조경학회지
• /
• 제28권3호
• /
• pp.97-104
• /
• 2000

Studies on the principle of traditional moulding techniques of architecture or structure are very important in the point of the work could accomplish succession to modern design. As an attempt of these work, this study tried to examine traditional moulding techniques applied in planes of ancient architecture and structure closely. The major findings of this study are summarized as follows; It was verified that planes of ancient Korean architectures and structures analyzed in this study was moulded by its multiple partitions with the six or eight partitions of circumference as the fundamental form. The well unearthed in kyong-bok palace recently was moulded by a concentric circle assumed form of 4 circle which was extended with equal interval and divided into multiple of 8 partition of circumference. Chon-duk-jung in chang-duk palace also was moulded by a concentric circle assumed form of 3 circle extended with equal interval, but circle were divide by 6 partitions. It was also found that 6$^{\circ}$§8 partitions of circumference(or its multiple partition) was applied to not only above structures but also the moulding planes of ancient architecture, and as a results, figures revealed in architectures analyzed is classified into three classes. And, this study analyzed arrangements of two temples. As a results, it is discovered that the Grid used in moulding planes of each building fixed the arrangement of buildings. Therefore, moulding by equal partition of circumference decided the form of each building and the relation of element at the same time.

• 열처리공학회지
• /
• 제32권3호
• /
• pp.113-117
• /
• 2019

The effects of severe plastic deformation and heat treatment on the mechanical properties of Al 5052 and 6005 alloys were investigated using the metallurgical technique and nano-indentation technique in nano-surface region. Equal channel angular pressing (ECAP) was used to apply severe plastic deformation to the aluminum alloys in order to obtain fine grain sized materials. The elastic modulus was measured and interpreted in relation to the metallurgical observation. The elastic modulus increased after ECAP process due to evolution of the fine grains. However, the elastic modulus decreased after heat treatment due to generation of coarsened precipitates on the grain boundaries.

• 천문학회지
• /
• 제34권1호
• /
• pp.31-33
• /
• 2001

The collision effects in particles of the accretion disk are examined by the use of small perturbation. The collision force is assumed to be equal to 2 vV. From the equations governing collisions of such particles the local dispersion relation is obtained.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.85-89
• /
• 2005

Lineament maps are the important tools that may reveal points of groundwater recharge, flow and development. In particular, groundwater flows and yields in mountainous area, composed of crystalline rocks with many fractures, are governed mainly by the lineaments corresponding to fractures, joints and faults. Lineaments may give important information on the best distribution of wells and their management. For two districts; Pohang and Cheonan, the relationship between lineament and groundwater factors was analyzed. To compare groundwater productivity, storativity, and transmissivity of a well site along the distance to lineament, the distances to lineament was regrouped into five groups with an equal range, 100m, for the Pohang district and they are also divided into five groups with an equal range, 150m, for the Cheonan district. From the results of the Spearman Rank Correlation Analysis and Kendall Analysis for each group, the means of SPC and T of wells which are located near lineaments generally have large values. The means of SPC and T show a reverse linear relationship with a lineament distance, but the means of S shows a disperse distribution and no distinct linear relation. Result of the linear regression model between SPC and lineament length density shows that it will be effective to use the lineament length density map when finding the optimal well site on a regional scale.

• 대한수학회지
• /
• 제48권6호
• /
• pp.1249-1268
• /
• 2011

For imaginary quadratic number fields F = $\mathbb{Q}(\sqrt{{\varepsilon}p_1{\ldots}p_{t-1}})$, where ${\varepsilon}{\in}${-1,-2} and distinct primes $p_i{\equiv}1$ mod 4, we give condition of 8-ranks of class groups C(F) of F equal to 1 or 2 provided that 4-ranks of C(F) are at most equal to 2. Especially for F = $\mathbb{Q}(\sqrt{{\varepsilon}p_1p_2)$, we compute densities of 8-ranks of C(F) equal to 1 or 2 in all such imaginary quadratic fields F. The results are stated in terms of congruence relation of $p_i$ modulo $2^n$, the quartic residue symbol $(\frac{p_1}{p_2})4$ and binary quadratic forms such as $p_2^{h+(2_{p_1})/4}=x^2-2p_1y^2$, where $h+(2p_1)$ is the narrow class number of $\mathbb{Q}(\sqrt{2p_1})$. The results are also very useful for numerical computations.

• 소성∙가공
• /
• 제15권2호
• /
• pp.105-111
• /
• 2006

A study was made to investigate the microstructure and the mechanical properties of low-carbon steel, Al-Mg alloy and Ti-6Al-4V alloy each representing bcc, fcc and hcp crystal structures, respectively fabricated by equal-channel angular(ECA) pressing. After a series of ECA pressings was performed, most grains were significantly refined below ${\mu}m$ in diameter with high mis-orientation of grain boundaries irrespective of different crystal structure used. Regarding the strain hardening capability, tensile tests of ultrafine grain (UFG) dual-phase (ferrite/martensite) steel which was different from UFG ferrite-pearlite steel were carried out at ambient temperature, and corresponding mechanical properties were discussed in relation to modified C-J analysis. Low-temperature and/or high strain-rate superplasticity of the UFG Al-Mg alloy and UFG Ti-6Al-4V alloy were also studied. Based on the analysis used in this study, it was concluded that UFG alloys exhibited the enhanced mechanical properties as compared to coarse-grained (CG) counterparts.