• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.580-583
• /
• 2007

Various matching methods have been introduced by investigators to improve digital elevation model (DEM) accuracy of satellite imagery. This study proposed an area-based matching method according to land cover property using correlation coefficient of pixel brightness value between the two images for DEM generation from IKONOS stereo imagery. For this, matching line (where "matching line" implies straight line that is approximated to complex nonlinear epipolar geometry) is established by exterior orientation parameters to minimize search area. The matching is carried out based on this line. Land cover classes are divided off into water, urban land, forest and agricultural land. Matching size is selected using a correlation-coefficient image in the four areas. The selected sizes are $81{\times}81$ pixels window, $21{\times}21$ pixels window, $119{\times}119$ pixels window and $51{\times}51$ pixels window in the water area, urban land, forest land and agricultural land, respectively. And hence, DEM is generated from IKONOS stereo imagery using the selected matching sizes and land cover map on the four types.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.17 no.1
• /
• pp.15-24
• /
• 2009

The energy usage and the economical feasibility of the typical two story office building in the three urban locations of South Korea are evaluated as the eight orientations. The smallest energy consume is shown at the true south. The ranges of the low energy consume are $-3l5^{\circ}{\sim}0^{\circ}\;and\;-135^{\circ}{\sim}-180^{\circ}$. There are obvious advantages of passive solar designs such as using a fully glazed facade at the true south in the building. The General Low voltage plan is the effective way for the office building when does not required the high voltage electricity. The energy cost of KEPCO is compared to that of XCEL ENERGY. The portion of the customer charge of XCEL ENERGY is about 10% but it is about 50% of the total tariff of KEPCO. The effective way to save the energy cost is by reducing the operating energy of XCEL ENERGY plane but the most effective way is reduce the contracting energy of KEPCO plane.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.153-153
• /
• 2011

Ni $TiO_2$ nano composite coatings were fabricated by using pulse current electrodeposition technique at 100 Hz pulse frequency with a constant 50% pulse duty cycles and reference was taken with respect to the direct current electrodeposition. The properties of the composite coatings were investigated by using SEM, XRD, Wear test and Vicker's microhardness test. XRD patterns of pulse deposited composite coatings were found to be changed from preferred (100) orientation to the random mixed orientations. The results demonstrated that the Vickers microhardness of composite coatings under pulse condition was significantly improved than that of pure nickel coating as well as direct current electrodeposited Ni-$TiO_2$ composite coatings. Wear tracks have shown the less plastic deformation at pulse condition with reduced coefficient of friction. Nickel matrix grain size was also found to be lower in pulse plated composite coatings as compared to direct current electrodeposited composite coatings.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.21 no.1
• /
• pp.145-150
• /
• 2010

The regenerated silk fibroin with various molecular weights (MW) was prepared by different dissolution condition and the effect of coagulant on the wet spinnability of the various MW silk fibroin solutions dissolved in formic acid was investigated by the observation of wet spun filament in coagulant and the measurement of maximum draw ratio. The observation on the wet spun filament in coagulation bath revealed that good fibers without bead were formed in a high MW and a very high MW silk fibroin samples. In contrast, beads were observed in the silk fibroin sample with medium MW. The maximum draw ratio of wet spun silk fibroin filament decreased with MW reduction. The decrease of maximum draw ratio in isopropanol, acetone, DMF and THF was remarkably higher than that in methanol and ethanol, indicating that the coagulant type strongly influenced the wet spinnability. The two simple evaluation methods used in this study showed complementary information for wet spinnability: (a) The observation of filament in coagulant was effective to check a continuous fiber formation and a bead formation, and (b) the maximum draw ratio measurement was useful to examine the post drawing ability related to molecular orientation.

• Journal of Korea Trade
• /
• v.23 no.4
• /
• pp.131-148
• /
• 2019

Purpose - Based on the Korea-China FTA as the starting point, this paper makes an empirical analysis of the main influencing factors of the FTA utilization and performance of SMEs. Design/methodology - Taking into account the relationship between the internal and external environmental factors on FTA activities and performance of Korea's SMEs, with PLS-SEM and data obtained by the questionnaire, Smart PLS was applied for the analysis. Findings - The recognition of FTA in SMEs has a significant positive effect on FTA utilization and performance, the international marketing orientation factor only has a significant positive effect on the performance, while the inadequate improvement of non-tariff barriers has a significant negative impact on FTA utilization. In addition, FTA activity has a significant mediation effect on two paths. Originality/value - This paper is of great practical relevance as a tool to enable SMEs to make effective utilization of Korea-China FTA and improve their imports and exports. The paper helps grasp the main factors affecting the utilization and performance of FTA for SMEs, also to establish FTA Business Model and FTA utilization plans for specific industries in the future regarding tariff and non-tariffs compatibility.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.36 no.4
• /
• pp.103-111
• /
• 2020

Perforated metal sheets are used as panels of facades for controlling environmental factors while ensuring user's visibility. Despite their functional potentials, only a specific direction of facades or an orientation of a building was considered in the relevant studies. This study proposed a design methodology for the perforated panel facades that reflects the location on the facades and the user's requirements. The optimization of quantitative and qualitative performance is achieved through communication between designers and users in a VR system. In optimizing quantitative performances, designers use machine learning techniques such as clustering and genetic algorithm to allocate optimal panels on the facades. In optimizing qualitative performances, through the VR system, users intervene in evaluating performances whose preferences are depending on them. The experiment using the office project showed that designers were able to make decisions based on clustering using GMM to optimize multiple quantitative performances. The gap between the target and final performance could be narrowed by limiting the types of perforated panels considering mass customization. In assessing visibility as a qualitative performance, users were able to participate in the design process using the VR system.

• PNF and Movement
• /
• v.19 no.2
• /
• pp.243-250
• /
• 2021

Purpose: The purpose of this study was to observe office workers' postural behaviors during computer work to identify the risk factors for head and thorax postural behaviors. Methods: The participants included 57 office workers who worked longer than 20 hours on a computer. Postural behaviors during computer work were measured using 3-D wearable motion sensors on the forehead and sternum. A multivariate linear regression model evaluated the association between various risk factors (neck pain, demographics, and environmental factors) and non-head and thorax postural behaviors. Results: The participants maintained their head and thorax in neutral postures (defined as 10° extension~10° flexion and 5° extension~10° flexion, respectively) for 24.7% and 39.3% of the total recorded time. Those who reported neck pain at the measurement of postural behaviors showed less time spent in thorax postures. Current neck pain, high desk height, and the distance between the keyboard and the edge of the desk (cm) were found to be related to less time spent in a neutral thorax posture. Conclusion: Office environment factors and current neck pain might affect workers' thorax postures, which might also determine the orientation of head postures during computer work.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.3
• /
• pp.61-69
• /
• 2003

This study investigated the effect of moisture content and loading direction on dowel bearing strength of two types of SCL. Dowel bearing tests of LVL and PSL were conducted with two different MC level, 7.5% and 19%, and two different oriention, L-direction(loading parallel to grain) and X-direction(loading perpendicular to grain). Most of specimens showed typical load-deformation curves and intersected 5% offset line. Failure modes were classified into two categories; spliting(for L-direction specimens) and peeling(for X-direction specimens). Dowel bearing strength generally decreased with increasing MC. The decreasing rate was more significant in X-directon. ESG also decreased with increasing MC, and the ratio of ESG of 7.5% versus 19% was about 1.47. Dowel bearing strength of LVL and PSL in L-direction was higher than that of X-direction. This results indicated that MC and loading orientation had a significant effect on dowel bearing strength of SCL. The average dowel bearing strength of LVL were higher than that of PSL in each loading direction. Two types of probability distribution model were chosen to quantify strength distribution, normal and 2-parameter weibull distribution. The two models showed good agreement with the data, especially in lower tail of the cumulative distribution. Normal and 2-parameter weibull distribution seemed to proper model of the dowel bearing strength for each MC levels.

• Journal of Information Technology Applications and Management
• /
• v.29 no.3
• /
• pp.25-41
• /
• 2022

While there exists voluminous literature on the internationalization of the firms, it has focused on mature firms or born-global firms. There is still a lack of research on firm that is in the growth stage between venture and mature firm. To fill this gap, this paper focuses on the newly public firm which is enter the stock market through initial public offerings (IPO). Specifically, I examine the relationship between the early listing and internationalization. In the venture firm aspect, the decision of the IPO necessary to allow to change organization structure, ownership and take a risk from environmental movements. This paper suggests early listing is a behavior of entrepreneur orientation. According to empirical results, there is a positive relationship between early listing and internationalization. It implies that early listing may help international expansion by sourcing finance, reputations from market. Furthermore, this study emphasizes the importance of financial slack resources to international expansion. I conclude that ventures need not only early entering in stock market but also securing sufficient financial slack resources to achieve sustainable growth in the international market.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.4
• /
• pp.352-358
• /
• 2022

We explored the frequency response of krill target strength (TS) to understand the Antarctic krill (Euphausia superba) and ice krill (Euphausia crystallorophias) using the stochastic distorted-wave Born approximation (SDWBA) model. The results showed that the distribution of orientation and the fatness factor could significantly impact on the frequency response of TS. Krill TS is clearly depended on acoustic properties, which could affect to estimate the biomass of two krill species. The results provide insight into the importance of understanding TS variation to estimate the Antarctic krill and ice krill biomass, and their ecology related to the environmental features in the Southern Ocean.