• Proceedings of the Korea Society of Environmental Biology Conference
• /
• 2004.05a
• /
• pp.25-25
• /
• 2004

We studied algal growth-related water quality of the Dongbok lake which is the drinking water reservoir for the Gwangju municipality. Peridinium cinctum and several diatomic algal species frequently caused water bloom throughout the lake from early spring to late autumn. With the heaviest predominance of Peridinium cintum in May 2003, COD was 13.7 mg/I in the surface layer. Highly turbid surface water with 46.8 mg/I of SS was also caused by Perdinium bloom. Peridinium bloom decisively eliminated cyanobacterial growth in the lake, otherwise cyanobacterial bloom resulted. Dense algal layer was confined in the upper several meters of the water column above the thermocline, which gives relatively algae-free water in deeper layer suitable for drinking source water supply. Upon collapse of thermocline, water quality of the surface layer was improved while deeper layer was deteriorated in terms of water quality. This paper deals with some details of water quality changes with algal growth in the Dongbok lake past two years.

• Journal of Hydrogen and New Energy
• /
• v.27 no.5
• /
• pp.526-532
• /
• 2016

In this study, we synthesized a mediator immobilized biocatalyst([FCA/GOx]/PEI/CNT) by surface modification using ferrocene carboxylic acid(FCA), and evaluated its performance as anode catalyst for biofuel cell. Through the application of FCA on glucose oxidase (GOx), the free amine groups on the lysine residue of GOx surface reacted with carboxylic acid of FCA and make amide bond between GOx and FCA. As the result of that, the electron transfer of catalyst was increased up to 1.91 times($0.468mA{\cdot}cm^{-2}$) than the catalyst without surface modification (GOx/PEI/CNT), and high maxium power density of $1.79mA{\cdot}cm^{-2}$ was gained.

• KIEAE Journal
• /
• v.11 no.2
• /
• pp.17-25
• /
• 2011

In order to provide basic data for designing the outdoor exercise environment to promote the health of the citizens, this study has analyzed the status of citizens' use of outdoor exercise places that have been supplied extensively recently and the factors affecting the citizens' choice of the places. A survey was made on 20 spots in 12 places where outdoor exercise equipment is installed to identify the characteristics of use and the factors affecting the selection of the spots and for the 1,733 survey sheets collected finally SPSS program was used to analyze the multiple answers. Major results of this research are as follows: First, since light exercise equipment mostly for bodily exercises has been installed, it has brought practical effects for the physically weak people, aged people and the people who scarcely exercise, while decreasing the users' economic burdens. Second, the scales of important factors the users think in selecting their exercise spots were 'spaciousness (2,028 times)' > 'accessibility (1,751 times)' > 'fitness (1,583' > 'supportability (1,445)' > 'community centeredness (1,260).' Third, the ratios of important factors regarding the choice of environment of outdoor exercise were 'near to walk (16.1%)' > 'nice natural environment (12.3%)' > 'always free to exercise (9.7%)' > 'shortage of exercise equipment (7.4%)' > 'possible to accompany family/neighbors (6.7%)' > 'no economic burden (6.5%).

• Journal of the Korean Home Economics Association
• /
• v.34 no.5
• /
• pp.183-196
• /
• 1996

The purposes of this study were to review the effects of textiles production on the environment, and to investigate the environmental consciousness and environmental preservation behavior of textile producers. This study was conducted by reference analysis and empirical research. To develope theoretical framework of dimensions of environmental behavior, references concerned were analyzed. And for empirical study, researcher developed a questionnaire based on the free writing by producers and references. The questionnaire included problems about environmental consciousness, environmental behavior, demographic variables, and environmental variables. 135 questionnaires were used for final data analysis. ANOVA and factor analysis were used. The results were as follows: First, the level of global environmental problem consciousness was relatively high. The conscious level of water pollution caused by the waste water from textile mills was the highest, and that of desertation of mountain caused by timber cutting was the lowest. The effects of textile dyers and finishers on the environment were the highest, and that of designers were the lowest. Second, the results of reference analysis showed that the dimensions of textile producers environmental behavior were resource and energy saving, solid waste reduction, and green product production. And the results of empirical study were resource and energy saving, resource reuse or recycling, solid waste reduction, and green product production, and total variances was 62.3%. The practice was the lowest. Third, global environment problem consciousness, environment problem consciousness caused by the textile life-cycle concerned, and clothing seperate-collection or not at residing place were effective on environmental behavior, and 52.45% of environmental behavior was explained with above variables.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2016.09a
• /
• pp.41-43
• /
• 2016

• Journal of Wellbeing Management and Applied Psychology
• /
• v.7 no.3
• /
• pp.1-11
• /
• 2024

Purpose: The purpose of this study is to present an efficient emission reduction ratio of plastic to reduce carbon dioxide, the main cause of greenhouse gases. Research design, data and methodology: This study calculated the absolute value of carbon dioxide by setting an equation through the emission coefficient using the US EPA's WARM model. Results: In the recycling ratio of 70%, it was found that the energy recovery ratio was 15.6%, which was the energy recovery ratio without generating carbon dioxide. When carbon dioxide is generated by changing plastic waste emissions, optimal efficiency is achieved by reducing emissions by 10% to 30% of energy recovery ratio, 20% to 50% of energy recovery ratio, and 30% to 80% or more of energy recovery ratio. Conclusions: The recycling rate should be set at a minimum of 70%, so that a carbon dioxide-free energy recovery rate could be obtained during the recycling process, supporting an eco-friendly basis for environmental policies aimed at this rate. In addition, it was possible to suggest that it is essential to reduce emissions by at least 30% for eco-friendly recycling measures that can achieve both economic and environmental feasibility in the energy recovery process through incineration during recycling in Korea.

• Restorative Dentistry and Endodontics
• /
• v.25 no.4
• /
• pp.587-598
• /
• 2000

Urea in the oral cavity is hydrolyzed mainly by bacterial ureases to ammonia, which in turn, raises pH of the oral environment, maintaining oral pH homeostasis, thereby inhibiting dental caries. Streptococcus salivarius has been shown to be a major contribution to oral ureolysis. Synthesis of urease by S. salivarius appears to be constitutive, but can be greatly enhanced in the acidic environment. It has been presumed that ureolytic activity of S. salivarius strains isolated from caries-active site is greater than that of strains from caries-free site. However, no in vivo study has supported the presumption. The present study was performed to observe the ureolytic activity of S. salivarius strains isolated from different environments in the same individual, finding out whether the ureolytic activity is related to dental caries. For the purpose, S. salivarius strains were isolated from caries-active site (>C2), a caries-free site of the tooth, and the dorsum of the tongue of each of 50 patients having decayed teeth. The strains isolated from the patients who harbored S. salivarius in more than two sites were selected and then their ureolytic activities were measured. In order to examine clonal diversity of the strains, their ureC genes were amplified by polymerase chain reaction (PCR) and then restricted with EcoRV, and the protein profiles of the strains were compared by SDS-PAGE. The results were as follows: 1. Of 50 patients, 13 patients harbored S. salivarius in more than two sites; a total of 61 S. salivarius strain were isolated from the patients and selected for the study. 2. Of 17 isolates from the caries-active site of 9 patients harboring S. salivarius in more than two sites including carious lesion, 10 (58.8%) showed a high ureolytic activity (> 200 ${\mu}mol/min/mg$). While, 19 out of 44 isolates (43.2%) from the caries-free site of the teeth and the dorsum of the tongues of 13 patients were the strains with a high ureolytic activity. 3. Of 9 patients harboring S. salivarius in more than two sites including caries-active site. 6 patients were found to have the strains in the caries-active site showing a lower ureolytic activity than the strains in the other sites. 4. Of 34 isolates with ureolytic activity higher than 40 ${\mu}mol/min/mg$, 32 isolates produced 0.54-Kbp PCR products regardless of the sites of bacterial collection. In contrast, of 27 isolates with ureolytic activity lower than 40${\mu}mol/min/mg$, 26 isolates yielded 1.3-Kbp PCR products or none regardless of the sites. 5. Different clonal types of S. salivarius with relatively higher and lower ureolytic activities were found in the same individuals and even in the same sites. 6. None of strains showing different ureolytic activity appeared to be the same clonal type. The overall results suggest that ureolytic activity of the isolates does not appear to be related to differences of the environments but related to their own genetic traits.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.37-37
• /
• 2011

열가소성 고분자 물질인 PET[poly(ethylene terephthalate)]는 섬유 및 필름, 음료병 등에 널리 사용되는 대표적인 범용 소재이며, 전체 PET 제조업은 2013년 약 200억불에 달할 것으로 예상되는 큰 시장이다. 최근 급격한 산업화에 따른 전 세계적인 환경오염의 심각성이 부각되면서 기업들의 환경 친화적인 제조 활동 및 생산 프로세스의 개선이 요구되고 있다. 현재 폴리에스테르 수지를 제조하기 위해 국내외 업체에서 가장 널리 사용 되고 있는 중합촉매는 중금속 원소인 고순도 삼산화안티몬($Sb_2O_3$)이며 통상 중합공정 중에 150~300ppm의 촉매가 사용된다. 세계보건기구(WHO)의 국제암연구기관(IARC)에서는 안티몬을 인체 발암성이 있는 물질로 분류 하여 현재 유럽을 중심으로 안티몬 사용을 제한하는 환경 규제가 가속화 되고 있다. 폴리에스테르 수지 제조 공정중 안티몬 촉매를 사용할 경우 정련, 염색, 알칼리 감량시 중금속(안티몬)검출에 따른 수질 오염 및 폐수처리비용이 증가하게 되며 대량의 중합촉매 사용에 따른 이물 증가로 작업성 및 품질 문제가 상존하게 된다. 따라서 이러한 제조 공정중의 고위험성 물질을 대체할 친환경, 고부가가치 신규 무독성 PET 소재 및 제품이 각광을 받게 될 것이다. 이번 연구에서는 티타늄계(Ti-based) 무독성 촉매를 이용하여 PET 중합을 실시한 Sb-free PET원단의 염색특성을 알아보는 것으로 분산염료 3종 (Red, Yellow, Blue)으로 염색이 완료된 원단을 spectrophotometer 를 이용하여 L, a b값과 K/S값으로 측정하였다. 동일한 염색 조건을 위해 두 종류의 원단을 하나의 실린더에서 기존 PET 염색과 동일한 조건으로 염색을 실시하였으며 실험 결과 전반적으로 기존 PET와 유사한 염색 특성을 보였다. 염색견뢰도 평가에서도 Sb-free PET원단과 기존 PET원단의 세탁 견뢰도, 마찰 견뢰도, 일광 견뢰도를 비교 했을 시 두 원단 모두 4~5급으로 우수한 견뢰도를 나타내었다.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.122-124
• /
• 2005

Underground distribution system is a trend due to the successive development of metropolitan area and satellite cities and the environment of the commercial and residential areas. The high quality of electricity, which is related with the minimal outage duration time due to the maintenance work for the underground distribution line, is mandatory. Hence, the construction method and tools for the outage-free maintenance construction have been required for underground distribution system. So far, all the efforts for outage-free maintenance for the underground distribution have been limited only to the survey for foreign countries situation and the theoretical provision; thus, It is required to develop the various construction method and the application tools. Differently from the aerial line, the construction of the underground cable is complicated and the insulation distance between conductor and shield should be maintained in loadmaking/breaking operation, though the apparatus connected with cable is a deadfront type. Also since the apparatus is installed above ground, by-pass of faulted area at busy area needs a variety of high technologies. Therefore, in this these, the authors introduce the development status of the loadbreak connectors, connection facilities, outage-free maintenance system for secondary side, a secondary auxiliary bushing and additional tools so that there can be more progress on this field.

• Journal of Welding and Joining
• /
• v.33 no.3
• /
• pp.25-31
• /
• 2015

Due to environmental regulations (RoHS, WEEE and ELV) of the European Union, electronics and automotive electronics have to eliminate toxic substance from electronic devices and system. Specifically, reliability issue of lead-free solder joint have an increasing demand for the car electronics caused by ELV banning. The authors prepared engine control unit and cabin electronics soldered with Sn-3.0Ag-0.5Cu (SAC305). To compare with the degradation characteristics of solder joint strength, thermal cycling test (TC), power-thermal cycling test (PTC) and series tests were conducted. Series tests were conducted for TC and PTC combined stress test using the same sample in sequence and continuously. TC test was performed at $-40{\sim}125^{\circ}C$ and soak time 10 min for 1000 cycles. PTC test was applied by pulse power and full function conditions during 100 cycles. Combined stress test was tested in accordance with automotive company standard. Solder joint degradation was observed by optical microscopy and environment scanning electron microscopy (ESEM). In addition, to compare with deterioration of bond strength of quad flat package (QFP) and chip components, we have measured lead pull and shear strength. Based on the series test results, consequently, we have validated of series test method for lifetime and reliability of Pb-free solder joint in automotive electronics.